The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in bio-integrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions, make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle of these issues. Firstly, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Secondly, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Thirdly, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourthly, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.
The membrane-bound hydrogenase (Hase I) of the hyperthermophilic bacterium Aquifex aeolicus belongs to an intriguing class of redox enzymes that show enhanced thermostability and oxygen tolerance. Protein film electrochemistry is employed here to portray the interaction of Hase I with molecular oxygen and obtain an overall picture of the catalytic activity. Fourier transform infrared (FTIR) spectroscopy integrated with in situ electrochemistry is used to identify structural details of the [NiFe] site and the intermediate states involved in its redox chemistry. We found that the active site coordination is similar to that of standard hydrogenases, with a conserved Fe(CN)(2)CO moiety. However, only four catalytic intermediates could be detected; these correspond structurally to the Ni-B, Ni-SI(a), Ni-C, and Ni-R states of standard hydrogenases. The Ni-SI/Ni-C and Ni-C/Ni-R midpoint potentials are approximately 100 mV more positive than those observed in mesophilic hydrogenases, which may be the reason that A. aeolicus Hase I is more suitable as a catalyst for H(2) oxidation than production. Protein film electrochemistry shows that oxygen inhibits the enzyme by reacting at the active site to form a single species (Ni-B); the same inactive state is obtained under oxidizing, anaerobic conditions. The mechanism of anaerobic inactivation and reactivation in A. aeolicus Hase I is similar to that in standard hydrogenases. However, the reactivation of the former is more than 2 orders of magnitude faster despite the fact that reduction of Ni-B is not thermodynamically more favorable. A scheme for the enzymatic mechanism of A. aeolicus Hase I is presented, and the results are discussed in relation to the proposed models of oxygen tolerance.
Knowledge of the behaviour of bacterial communities is crucial for understanding biogeochemical cycles and developing environmental biotechnology. Here we demonstrate the formation of an artificial consortium between two anaerobic bacteria, Clostridium acetobutylicum (Gram-positive) and Desulfovibrio vulgaris Hildenborough (Gram-negative, sulfate-reducing) in which physical interactions between the two partners induce emergent properties. Molecular and cellular approaches show that tight cell-cell interactions are associated with an exchange of molecules, including proteins, which allows the growth of one partner (D. vulgaris) in spite of the shortage of nutrients. This physical interaction induces changes in expression of two genes encoding enzymes at the pyruvate crossroads, with concomitant changes in the distribution of metabolic fluxes, and allows a substantial increase in hydrogen production without requiring genetic engineering. The stress induced by the shortage of nutrients of D. vulgaris appears to trigger the interaction.
Due to the lack of a valid approach in the design of electrochemical interfaces modified with enzymes for efficient catalysis, many oxidoreductases are still not addressed by electrochemistry. We report in this work an in-depth study of the interactions between two different bilirubin oxidases, (from the fungus Myrothecium verrucaria and from the bacterium Bacillus pumilus), catalysts of oxygen reduction, and carbon nanotubes bearing various surface charges (pristine, carboxylic-, and pyrene-methylamine-functionalized). The surface charges and dipole moment of the enzymes as well as the surface state of the nanomaterials are characterized as a function of pH. An original electrochemical approach allows determination of the best interface for direct or mediated electron transfer processes as a function of enzyme, nanomaterial type, and adsorption conditions. We correlate these experimental results to theoric voltammetric curves. Such an integrative study suggests strategies for designing efficient bioelectrochemical interfaces toward the elaboration of biodevices such as enzymatic fuel cells for sustainable electricity production.
International audienceUsing redox enzymes as biocatalysts in fuel cells is an attractive strategy for sustainable energy production. Once hydrogenase for H2 oxidation and bilirubin oxidase (BOD) for O2 reduction have been wired on electrodes, the enzymatic fuel cell (EFC) thus built is expected to provide sufficient energy to power small electronic devices, while overcoming the issues associated with scarcity, price and inhibition of platinum based catalysts. Despite recent improvements, these biodevices suffer from moderate power output and low stability. In this work, we demonstrate how substrate diffusion and enzyme distribution in the bioelectrodes control EFC performance. A new EFC was built by immobilizing two thermostableenzymes in hierarchical carbon felt modified by carbon nanotubes. This device displayed very high power and stability, producing 15.8 mW h of energy after 17 h of continuous operation. Despite the large available electrode porosity, mass transfer was shown to limit the performance. To determine the optimal geometry of the EFC, a numerical model was established, based on a finite element method (FEM). This model allowed an optimal electrode thickness of less than 100 mm to be determined, with a porosity of 60%. Thanks to very efficient enzyme wiring and high enzyme loading, non-catalytic signals for both enzymes were detected and quantified, enabling the electroactive enzyme distribution in the porouselectrode to be fully determined for the first time....
The electrochemistry of membrane-bound [NiFe] hydrogenase I ([NiFe]-hase I) from the hyperthermophilic bacterium Aquifex aeolicus was investigated at gold and graphite electrodes. Direct and mediated H(2) oxidation were proved to be efficient in a temperature range of 25-70 degrees C, describing a potential window for H(2) oxidation similar to that of O(2)-tolerant hydrogenases. Search for enhancement of current densities and enzyme stability was achieved by the use of carbon nanotube coatings. We report high catalytic currents for H(2) oxidation up to 1 mA cm(-2), 10 times higher than at the bare electrode. Interestingly, high stability of the direct catalytic process was observed when encapsulating A. aeolicus [NiFe]-hase I into a carboxylic functionalized single walled carbon nanotube network. This suggests a peculiar interaction between the enzyme and the electrode material. The parameters that governed the orientation of the enzyme before electron transfer were thus investigated using self-assembled-monolayer gold electrodes. No control of the orientation by the charge or the hydrophobicity of the interface was demonstrated. This behavior was explained on the basis of a structural comparison between A. aeolicus [NiFe]-hase I and Desulfovibrio fructosovorans [NiFe] hydrogenase, which revealed the absence of acidic residues and an additional loop in the environment of the [4Fe-4S] distal cluster in A. aeolicus [NiFe]-hase I. Finally, the effect of inhibitors on the direct oxidation of H(2) by A. aeolicus [NiFe]-hase I encapsulated in a single walled carbon nanotube network was investigated. No inhibition by CO and tolerance toward O(2) were observed. Discussion of the reasons for such tolerance was undertaken on the basis of structural comparison with hydrogenases from aerobic bacteria.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.