This study focuses on the Strait of Singapore and Batam Waterways area because it is one of the world’s most congested straits used for international shipping. The study aims to estimate exhaust gas emission and the concentration of emission to several areas around the strait. This is accomplished by evaluating the density of shipping lanes in the strait by using the data which obtained by Automatic Identification System (AIS). MEET methodology is used to estimate emissions from ships. There were 1269 total number of ships through the strait on September 27, 2014 at 06.00 am-08.00 am produces total exhaust emission for NOx, CO, CO2, VOC, PM and SOx were about 12595.35 g/second (15.99%), 25725.19 g/second (32.66%), 11832.31 g/second (15.02%), 5973.23 g/second (7.58%), 443.71 g/second, (0.56%), 22185.57 g/second (28.17%), respectively. The ships under the Singapore flag contribute approximately 22.78% of total emissions in the Strait of Singapore and Batam Waterways followed by Panama, Indonesia and Malaysia 14.47%, 3.67%, 1.91%, respectively. Based on the total emission rates hips under Indonesia and Malaysia rank of seventh and eighth respectively.
Kebutuhan alat pelindung diri (APD) berupa pelindung wajah mengalami kenaikan yang tajam semenjak penyebaran covid19 . Virus yang dapat menular melalui media droplet tersebut dapat membahayakan tenaga kesehatan atau personal yang berinteraksi langsung dengan penderita penyakit yang disebabkan covid19. Keberadaan pelindung wajah, meskipun bukan alat pelindung satu-satunya sangat diperlukan untuk menunjang peralatan yang lain. Tanpa adanya pelindung wajah tersebut maka akan memperbesar kemungkinan penularan virus tersebut. Tujuan dari penulisan jurnal ini adalah untuk menjelaskan proses desain, pembuatan, serta rencana distribusi APD ke masyarakat. Dari proses yang dilakukan dapat disimpulkan bahwa proses produksi melalui beberapa tahapan yang melibatkan sumber daya manusia dengan kemampuan desain produk, manajerial, pengemasan dan sumber daya alat yang beragam meliputi mesin pneumatic, CNC, alat pemotong dengan laser serta desain komputer. Dari segi distribusi, pengiriman alat dilakukan dengan menggunakan berbagai espedisi darat, laut dan udara dengan area pengiriman beberapa provinsi antara lain Jawa Tengah, Jawa Timur, Jawa Barat, Sumatera Barat serta kepualauan Riau.
Salah satu hal yang menjadi tolak ukur dalam menilai produktifitas dan efisiensi suatu industri adalah dengan melihat tingkat cacat produk yang terjadi dalam menghasilkan suatu produk. cacat produk yang sering terjadi antara lain, short moulding, warpage, sink mark, flow line, flashess, bubble, hole/gap, over moulding. Pada penelitian ini di kaji tentang pengaruh temperatur dan tekanan pada mesin injeksi moulding berbahan plastic jenis (pvc compound),dengan melakukan analisa penyebab cacat produk berdasarkan parameter temperatur dan tekanan pada barrel, Tujuan dari penelitian ini adalah untuk meminimalisir cacat produk yang dihasilkan mesin injection moulding dan mendapatkan setting parameter moulding yang tepat, Metode yang akan dilakukan yaitu memvariasikan setting termperatur dengan variabel bebas yaitu 150oC, 170oC, 190oC dan variable bebas pada tekanan 60 Mpa dan 100 Mpa, di lakukan proses secara bertahap sebanyak 3 kali running mesin dalam satu kali setting parameter untuk memastikan berapa banyak cacat produk. Dari hasil pengaturan parameter mesin injeksi moulding telah ditemukan parameter yang optimal dengan cacat produk yang paling sedikit pada variasi temperatur 170oC dan tekanan 60 MPa.
Kebutuhan alat pelindung diri (APD) berupa pelindung wajah mengalami kenaikan yang tajam semenjak penyebaran covid19 . Virus yang dapat menular melalui media droplet tersebut dapat membahayakan tenaga kesehatan atau personal yang berinteraksi langsung dengan penderita penyakit yang disebabkan covid19. Keberadaan pelindung wajah, meskipun bukan alat pelindung satu-satunya sangat diperlukan untuk menunjang peralatan yang lain. Tanpa adanya pelindung wajah tersebut maka akan memperbesar kemungkinan penularan virus tersebut. Tujuan dari penulisan jurnal ini adalah untuk menjelaskan proses desain, pembuatan, serta rencana distribusi APD ke masyarakat. Dari proses yang dilakukan dapat disimpulkan bahwa proses produksi melalui beberapa tahapan yang melibatkan sumber daya manusia dengan kemampuan desain produk, manajerial, pengemasan dan sumber daya alat yang beragam meliputi mesin pneumatic, CNC, alat pemotong dengan laser serta desain komputer. Dari segi distribusi, pengiriman alat dilakukan dengan menggunakan berbagai espedisi darat, laut dan udara dengan area pengiriman beberapa provinsi antara lain Jawa Tengah, Jawa Timur, Jawa Barat, Sumatera Barat serta kepualauan Riau.
Perbaikan dan perawatan kapal merupakan proses yang dilakukan pemilik kapal agar kondisi kapal yang diunakan selalu dalam kondisi prima. Masyarakat pesisir melakukan perbaikan kapal berdasar atas pengalaman yang biasanya diperoleh secara turun temurun. Dalam proses tersebut banyak masyarakat yang kurang peduli dengan resiko keselamatan dan kesehatan kerja. Hal ini bisa terjadi karena msyarakat sering berikir bahwa selama ini kegiatan tersebut tidak masalah sebab mereka tidak pernah sakit. Dengan kurang awamnya masyarakat terhadap masalah tersebut maka perlu diberikan sebuah penyuluhan serta langkah aman dalam melakukan perbaikan kapal yang pasti akan mereka lakukan.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.