The present research was aiming to study In-Silico the effect of Glycyrrhizic Acid ammonium salt (GAS) and Salicylic acid (SA) on the coat protein of potato leafroll virus (PLRV). In addition, in-vitro studying the effect of (GAS NPs) and Salicylic acid (SA NPs) nanoparticles at concentrations 0.15, 0.30, 1.25 and 2.5 mM, respectively, to control, decline or reduce the presence of PLRV in potato plants Solanum tuberosum L. selena. (GAS NPs) and (SA NPs) were applied in the MS medium at concentrations 0.15, 0.30, 1.25 and 2.5 mM, respectively. Results revealed that, enhancement or decline the PLRV according to the initiation of specific pathways. The expression level of Kinase 3 gene increased significantly due to the two used concentrations of GAS NPs. While the expression of callose gene was upregulated significantly in response to treatment of PLRV infected plant with (GAS NPs) with concentration (0.30 mM). Treatment with (SA NPs) caused upregulation significance only of callose gene at (2.5 mM) concentration. The molecular modeling results of used compounds (glycyrrhizic acid ammonium salt and salicylic acid) showed highest score of binding and the best rms define value with a very good binding mode and perfect interactions with amino acids of the three subunits (A, B and C) forming the protein coat of leaf roll virus. Glycyrrhizic acid ammonium salt and salicylic acid nanoparticles could be perfect solution to produce potato plant free virus in-vitro. Further larger studies are needed to investigate the role of the studied compounds in vivo.

No abstract

Tomatoes are usually consumed daily in the human diet. High temperatures reduce the number of tomato yields per year. Heat stress has been considered one of the most prominent causes of alterations in morphological and molecular characteristics in crops that decrease normal growth, production, and yield in diverse plants, including tomatoes (Solanum lycopersicum L.). In this study, we evaluated six tomato lines, namely G1, G2, G3, G4, G5, and G6, at morphological, molecular, and cytological levels under heat stress. The average results of two seasons (2018 and 2019) clarified that the G6, G1, and G2 lines recorded the highest flowering values, as well as some fruit and vegetative growth traits. Furthermore, G6 and G2 had the maximum number of fruits/plant, whereas G2 and G1 produced the highest yield/plant under high temperatures. The number of chromosomes in all lines was 2n = 24, except for G5, in which the number was 2n = 26, whereas chromosome sizes were small, ranging from 323.08 to 464.48 µm. The G1 cultivar was a symmetrical cultivar (primitive), having the highest total form percentage (TF%) and symmetry index (Syi) values and the minimum karyotype asymmetry index (ASK) value, whereas G4 was asymmetrical (advanced). Molecular marker analysis demonstrated that intersimple sequence repeat (ISSR) primers 49A, HB-14, 49A, 49B, and 89B presented the highest values for polymorphism percentage P%, marker index (MI), effective multiplex ratio (EMR), and polymorphism information content (PIC), respectively. In contrast, OP-A3, OP-B3, SCoT 2, and SCoT 12 primers showed the highest PIC, EMR, MI, P%, and resolving power (Rp) values across the studied random amplified polymorphic DNA (RAPD) and start codon-targeted (SCoT) primers. Moreover, ISSR revealed the highest number of unique specific markers (6), followed by RAPD (4) and SCoT (3) markers. Cluster analysis of combined cytological data and data relating to molecular marker attributes separated the G1, G2, and G3 lines into one group, whereas the other lines were clustered in another group. On the whole, the application of combined analysis using morphological, cytological, and molecular genetics techniques could be considered to provide suitable parameters for studying the evolution of the genetic divergence between the studied tomato lines.

Quinoa (Chenopodium quinoa Willd.) is a halophytic crop that can withstand a variety of abiotic stresses, including salt. The present research examined the mechanisms of salt tolerance in five different quinoa genotypes at four different salinity levels (control (60), 80, 120, and 160 mM NaCl). ISSR and SCoT analysis revealed high polymorphism percentages of 90.91% and 85.26%, respectively. Furthermore, ISSR 1 and SCoT 7 attained the greatest number of polymorphic amplicons (27 and 26), respectively. Notably, LINE-6 and M-28 genotypes demonstrated the greatest number of unique positive and negative amplicons (50 and 42) generated from ISSR and SCoT, respectively. Protein pattern analysis detected 11 bands with a polymorphism percentage 27.27% among the quinoa genotypes, with three unique bands distinguishable for the M-28 genotype. Similarity correlation indicated that the highest similarity was between S-10 and Regeolone-3 (0.657), while the lowest similarity was between M-28 and LINE-6 (0.44). Significant variations existed among the studied salinity treatments, genotypes, and the interactions between them. The highest and lowest values for all the studied morpho-physiological and biochemical traits were recorded at 60 and 160 mM NaCl concentrations, respectively, except for the Na and proline contents, which exhibited the opposite relationship. The M-28 genotype demonstrated the highest values for all studied characteristics, while the LINE-6 genotype represented the lowest in both seasons. On the other hand, mRNA transcript levels for CqSOS1 did not exhibit differential expression in roots and leaf tissues, while the expression of CqNHX1 was upregulated more in both tissues for the M-28 genotype than for the LINE-6 genotype, and its maximum induction was seen in the leaves. Overall, the genotypes M-28 and LINE-6 were identified as the most and least salinity-tolerant, respectively.

Waste from crustaceans has adverse effects on the environment. In this respect, shrimp waste was valorized for producing chitosan nanoparticles as a source for eco-friendly nano-nitrogen fertilizer. The application of nano-nitrogen fertilizers is a valuable alternative approach in agriculture due to its potential for reducing the application of mineral nitrogen fertilizers and increasing yield quality and quantity, thereby helping to reduce the worldwide food shortage. Chitosan nanoparticles were foliar sprayed at three volumes (0, 7, and 14 L/ha) and compared with mineral nitrogen fertilizer (M-N) sprayed at three volumes (0, 120, and 240 kg N/ha) and their combination on two wheat cultivars (Misr-1 and Gemaiza-11) during two consecutive seasons (2019/2020 and 2020/2021) in order to evaluate the agronomic response. The synthesized chitosan nanoparticles displayed characteristic bands of both Nan-N and urea/chitosan from 500–4000 cm−1. They are stable and have a huge surface area of 73.21 m2 g−1. The results revealed significant differences among wheat cultivars, fertilization applications, individual or combined, and their interactions for yield-contributing traits. Foliar application of nano-nitrogen fertilizer at 14 L/ha combined with mineral fertilizer at 240 kg/ha significantly increased total chlorophyll content by 41 and 31% compared to control; concerning plant height, the two cultivars recorded the tallest plants (86.2 and 86.5 cm) compared to control. On the other hand, the heaviest 1000-grain weight (55.8 and 57.4 g) was recorded with treatment of 120 kg Mn-N and 14 L Nan-N/ha compared to the control (47.6 and 45.5 g). The Misr-1 cultivar achieved the highest values for grain yield and nitrogen (1.30 and 1.91 mg/L) and potassium (9.87 and 9.81 mg/L) in the two studied seasons when foliarly sprayed with the combination of 120 kg Mn-N/ha + 14 L Nan-N/ha compared to the Gemaiza-11 cultivar. It can be concluded that Misr-1 exhibited higher levels of total chlorophyll content, spike length, 100-grain weight, grain yield in kg/ha, and nitrogen and potassium. However, Gemaiza-11 displayed higher biomass and straw yield values, plant height, and sodium concentration values. It could be economically recommended to use the application of 120 kg Mn-N/ha + 14 L Nan-N/ha on the Misr-1 cultivar to achieve the highest crop yield.

The genetic diversity and the relationships among sesame cultivars were investigated using physiological and cyto/molecular analysis. To our information, no studies have yet been conducted on the genetic evaluation of sesame genotypes based on cyto/molecular analysis in Saudi Arabia. This study showed that genotype Bah-312 had the highest values from physiological and biochemical traits (plant height, harvest index, total plant dry matter, seed yield, oil content, and fatty acids content). Using 20 ISSR and 25 SCoT primers, the studied genotypes amplified 233 and 275 alleles, while the average polymorphism percentage (P%) was 65.32% (ISSR) and 77.8% (SCoT) across all the studied genotypes, respectively. To assess the markers efficiency analysis the polymorphism information contents (PIC), Marker Index (MI), Effective Multiplex Ratio (EMR), Resolving Power (Rp) were estimated. In general, primers (ISSR 2 & SCoT 21) and (ISSR 4 & SCoT 3) revealed the highest and lowest values for P %, PIC, MI, and EMR%. Furthermore, 188 positive and negative unique bands were detected, out of which ISSR generated 84, while 104 were amplified by SCoT analysis. In this regard, genotype Bah-312 generated 41 unique amplicons, and Jiz-511 genotype 23 unique amplicons. In the same context, the population genetics parameters, number of different alleles (Na), number of effective alleles (Ne), Shannon’s index (I), expected heterozygosity (He), and Unbiased Expected Heterozygosity (uHe), were calculated. ISSR marker showed the highest values for all the estimated parameters. In this regard, genotype Bah-312 exhibited the highest values (1.35, 1.37, 0.31, 0.21, 0.29) & (1.31, 1.35, 0.30, 0.20, 0.27) while, genotype Ahs-670 revealed the least values (1.29, 1.31, 0.26, 0.16, 0.23) &(1.14, 1.26, 0.22, 0.15, 0.20) for ISSR and SCoT markers respectively. For cytological data, according to the highest asymmetry index (AsK%) and lowest total form percentage (TF%) values, genotype Ahs-670 was the most advanced cultivar, and genotype Bah-312 was the most primitive one. According to the degree of asymmetry of karyotype (A) and intrachromosomal asymmetry index (A1), sesame genotype Ahs-670 was the most asymmetrical, and Bah-312 was the most symmetrical genotype. This study gives some helpful information about the genetic diversity of six sesame landraces. The variation harbored by these landraces could be used in sesame breeding programs.

Water scarcity is a major environmental stress that adversatively impacts wheat growth, production, and quality. Furthermore, drought is predicted to be more frequent and severe as a result of climate change, particularly in arid regions. Hence, breeding for drought-tolerant and high-yielding wheat genotypes has become more decisive to sustain its production and ensure global food security with continuing population growth. The present study aimed at evaluating different parental bread wheat genotypes (exotic and local) and their hybrids under normal and drought stress conditions. Gene action controlling physiological, agronomic, and quality traits through half-diallel analysis was applied. The results showed that water-deficit stress substantially decreased chlorophyll content, photosynthetic efficiency (FV/Fm), relative water content, grain yield, and yield attributes. On the other hand, proline content, antioxidant enzyme activities (CAT, POD, and SOD), grain protein content, wet gluten content, and dry gluten content were significantly increased compared to well-watered conditions. The 36 evaluated genotypes were classified based on drought tolerance indices into 5 groups varying from highly drought-tolerant (group A) to highly drought-sensitive genotypes (group E). The parental genotypes P3 and P8 were identified as good combiners to increase chlorophyll b, total chlorophyll content, relative water content, grain yield, and yield components under water deficit conditions. Additionally, the cross combinations P2 × P4, P3 × P5, P3 × P8, and P6 × P7 were the most promising combinations to increase yield traits and multiple physiological parameters under water deficit conditions. Furthermore, P1, P2, and P5 were recognized as promising parents to improve grain protein content and wet and dry gluten contents under drought stress. In addition, the crosses P1 × P4, P2 × P3, P2 × P5, P2 × P6, P4 × P7, P5 × P7, P5 × P8, P6 × P8, and P7 × P8 were the best combinations to improve grain protein content under water-stressed and non-stressed conditions. Certain physiological traits displayed highly positive associations with grain yield and its contributing traits under drought stress such as chlorophyll a, chlorophyll b, total chlorophyll content, photosynthetic efficiency (Fv/Fm), proline content, and relative water content, which suggest their importance for indirect selection under water deficit conditions. Otherwise, grain protein content was negatively correlated with grain yield, indicating that selection for higher grain yield could reduce grain protein content under drought stress conditions.

Alfalfa (Medicago sativa L.) is one of the most important perennial forage crops to build effective diets for livestock producers. Forage crop improvement depends largely on the availability of diverse germplasms and their efficient utilization. The present investigation was conducted at Ismailia Agricultural Research Station to assess twenty-one alfalfa genotypes for yield components, forage yield and quality traits during 2019/2020 and 2020/2021. The genotypes were evaluated in field experiments with three replicates and a randomized complete block design, using analysis of variance, estimate of genetic variability, estimate of broad sense heritability (hb2) and cluster analysis to identify the inter relationships among the studied genotypes as well as principal component analysis (PCA) to explain the majority of the total variation. Significant differences were found among genotypes for all studied traits. The general mean of the studied traits was higher in the second year than the first year. Moreover, the combined analysis showed highly significant differences between the two years, genotypes and the year × gen. interaction for the traits studied. The genotype F18 recorded the highest values for plant height, number of tiller/m2, total fresh yield and total dry yield, while, the genotype F49 ranked first for leaf/stem ratio. The results showed highly significant variation among the studied genotypes for crude protein %, crude fiber % and ash %. Data revealed that the genotypes P13 and P5 showed the highest values for crude protein %, whereas, the genotype F18 recorded the highest values for crude fiber % and ash content. The results revealed high estimates of genotypic coefficient and phenotypic coefficient of variation (GCV% and PCV%) with high hb2, indicating the presence of genetic variability and effective potential selection for these traits. The cluster analysis exhibited considerable genetic diversity among the genotypes, which classified the twenty one genotypes of alfalfa into five sub-clusters. The genotypes F18, F49, K75, S35, P20, P5 and P13 recorded the highest values for all studied traits compared with other clusters. Furthermore, the PC analysis grouped the studied genotypes into groups and remained scattered in all four quadrants based on all studied traits. Ultimately, superior genotypes were identified can be utilized for crop improvement in future breeding schemes.