High turfgrass wear resistance and recovery are the most sought after characteristics in turfgrass species when used for sports turf, but they are also very important in home gardens and public parks. Several wear resistance investigations have been conducted in field conditions in recent years, but these investigations involved the use of machinery and techniques that are not able to segregate the plant wounding and death effects from soil compaction effects that are generally associated with turfgrass wear. The same can be said of wear recovery investigations, with an extensive use of agronomical machinery for field trials. This study focussed on the wear resistance and recovery of mature swards of Cynodon dactylon (L.) Pers. var.dactylonC. transvaalensis Burt-Davy cv. Tifway 419, Zoysia matrella (L.) Merr. cv. Zeon and Paspalum vaginatum Swartz. cv. Salam and a typical sports-type mix of Lolium perenne L. (cvv. Speedster 35% and Greenway 35%) + Poa pratensis L. (cvv. SR2100 15% and Greenknight 15%). The goal of this trial was to evaluate turfgrass wear resistance and recovery devoid of climatic and soil effects and thus, sward growing, wear simulation and recovery were conducted in controlled environment. Furthermore, wear simulation was conducted with FIFA-approved, numerical control machinery (Lisport). Wear resistance and recovery data was plotted against results from laboratory investigations on key tissue constituents. Zoysia matrella proved to be the most wear resistant, but the slowest in recovery, whereas the bermudagrass hybrid showed the exact opposite behaviour. Lignin and carbohydrate concentrations proved to be the two factors most closely correlated with wear resistance and recovery respectively. These two classes of compounds were present in an equilibrium that was species specific, with a frequent mutual exclusion between lignin and starch concentrations that deserves further investigation at the intra-specific level
The intrinsic resistance of plant tissue to several biomechanical stresses, including tensile stress, is a decisive factor in determining the wear resistance of a turfgrass species. Lignin, dry matter, starch, sugars and silica are some of the tissue constituents that have been associated with leaf and stem mechanical resistance, whereas little information is available concerning stolons and rhizomes. These organs not only enable C4 turfgrass species lateral growth, soil colonisation and injury recovery, but are also key constituents of mature swards. This study consisted in an extensive investigation on the effective leaf, stolon and rhizome tensile strength of Cynodon dactylon (L.) Pers. var. dactylon × C. transvaalensis Burt-Davy cv. Tifway 419, Zoysia matrella (L.) Merr. cv. Zeon and Paspalum vaginatum Swartz. cv. Salam, as measured with a Fédération Internationale de Football Association (FIFA)-approved dynamometer and correlating the results with laboratory investigations on key tissue constituents. Tensile strength per unit area was influenced by both tissue constituents and tissue dimension. In rhizomes and stolons, tissue breakage usually occurred in the area at the intercalary meristem at the apical zone in the immediate proximity of a node. Older tissues had higher tensile strength owing to their higher levels of lignification. Lignin was the principal constituent determining tissue tensile strength and as such it could be used as a turfgrass wear resistance predictor in the cultivar breeding stages. Stolon total soluble sugars were generally inversely proportional to lignin content and, therefore, can also be considered clear markers of tissue mechanical strength. Silica was found to have no influence on the mechanical properties tissues.
In germinating seeds under unfavorable environmental conditions, the mobilization of stores in the cotyledons is delayed, which may result in a different modulation of carbohydrates balance and a decrease in seedling vigor. Tall fescue (Festuca arundinacea Schreb.) caryopses grown at 4°C in the dark for an extended period in complete absence of nutrients, showed an unexpected ability to survive. Seedlings grown at 4°C for 210 days were morphologically identical to seedlings grown at 23°C for 21 days. After 400 days, seedlings grown at 4°C were able to differentiate plastids to chloroplast in just few days once transferred to the light and 23°C. Tall fescue exposed to prolonged period at 4°C showed marked anatomical changes: cell wall thickening, undifferentiated plastids, more root hairs and less xylem lignification. Physiological modifications were also observed, in particular related to sugar content, GA and ABA levels and amylolytic enzymes pattern. The phytohormones profiles exhibited at 4 and 23°C were comparable when normalized to the respective physiological states. Both the onset and the completion of germination were linked to GA and ABA levels, as well as to the ratio between these two hormones. All plants showed a sharp decline in carbohydrate content, with a consequent onset of gradual sugar starvation. This explained the slowed then full arrest in growth under both treatment regimes. The analysis of amylolytic activity showed that Ca2+ played a central role in the stabilization of several isoforms. Overall, convergence of starvation and hormone signals meet in crosstalk to regulate germination, growth and development in tall fescue.
This work discusses some issues in the debugging of concurrent programs.A set of desirable characteristics of a debugger for concurrent
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.