This study, called APEX, is exploring novel concepts for fusion chamber technology that can substantially improve the attractiveness of fusion energy systems. The emphasis of the study is on fundamental understanding and advancing the underlying engineering sciences, integration of the physics and engineering requirements, and enhancing innovation for the chamber technology components surrounding the plasma. The chamber technology goals in APEX include: (1) high power density capability with neutron wall load \ 10 MW/m 2 and surface heat flux \ 2 MW/m 2 , (2) high power conversion efficiency ( \ 40%), (3) high availability, and (4) simple technological and material constraints. Two classes of innovative concepts have emerged that offer great promise and deserve further (2001) 181-247 182 research and development. The first class seeks to eliminate the solid ''bare'' first wall by flowing liquids facing the plasma. This liquid wall idea evolved during the APEX study into a number of concepts based on: (a) using liquid metals (Li or Sn-Li) or a molten salt (Flibe) as the working liquid, (b) utilizing electromagnetic, inertial and/or other types of forces to restrain the liquid against a backing wall and control the hydrodynamic flow configurations, and (c) employing a thin ( 2 cm) or thick ( 40 cm) liquid layer to remove the surface heat flux and attenuate the neutrons. These liquid wall concepts have some common features but also have widely different issues and merits. Some of the attractive features of liquid walls include the potential for: (1) high power density capability; (2) higher plasma b and stable physics regimes if liquid metals are used; (3) increased disruption survivability; (4) reduced volume of radioactive waste; (5) reduced radiation damage in structural materials; and (6) higher availability. Analyses show that not all of these potential advantages may be realized simultaneously in a single concept. However, the realization of only a subset of these advantages will result in remarkable progress toward attractive fusion energy systems. Of the many scientific and engineering issues for liquid walls, the most important are: (1) plasma-liquid interactions including both plasma-liquid surface and liquid wall-bulk plasma interactions; (2) hydrodynamic flow configuration control in complex geometries including penetrations; and (3) heat transfer at free surface and temperature control. The second class of concepts focuses on ideas for extending the capabilities, particularly the power density and operating temperature limits, of solid first walls. The most promising idea, called EVOLVE, is based on the use of a high-temperature refractory alloy (e.g. W -5% Re) with an innovative cooling scheme based on the use of the heat of vaporization of lithium. Calculations show that an evaporative system with Li at 1 200°C can remove the goal heat loads and result in a high power conversion efficiency. The vapor operating pressure is low, resulting in a very low operating stress in the structure. In ad...
An attractive blanket concept for the fusion reactor is the dual coolant Pb-17Li liquid (DCLL) breeder design. Reduced activation ferritic steel (RAFS) is used as the structural material. Helium is used to cool the first wall and blanket structure, and the selfcooled breeder Pb-17Li is circulated for power conversion and for tritium breeding. A SiC f /SiC composite insert is used as the magnetohydrodynamic (MHD) insulation to reduce the impact from the MHD pressure drop of the circulating Pb-17Li and as the thermal insulator to separate the high temperature Pb-17Li from the helium cooled RAFS structure.have proposed a test plan for the DCLL ITER-Test Blanket Module program.
Controlled fusion energy is one of the long term, non-fossil energy sources available to mankind. It has the potential of significant advantages over fission nuclear power in that the consequences of severe accidents are predicted to be less and the radioactive waste burden is calculated to be smaller. Fusion can be an important ingredient in the future world energy mix and can be part of an 'insurance policy' energy strategy to develop new sources as a hedge against environmental, supply or political difficulties connected with the use of fossil fuel and present-day nuclear power. Progress in fusion reactor technology and design is described for both magnetic and inertial fusion energy systems. The projected economic prospects show that fusion will be capital intensive, and the historical trend is towards greater mass utilization efficiency and more competitive costs. Recent studies emphasizing safety and environmental advantages show that the competitive potential of fusion can be further enhanced by specific choices of materials and design. The safety and environmental prospects of fusion appear to exceed substantially those of advanced fission and coal. For example, the level of radioactivity in a low activation fusion reactor at 1 year and at 100 years after shutdown is calculated to be about one-millionth of the radioactivity in a fission reactor of the same power. Likewise, the maximum plausible dose predicted at the site boundary in the case of a low activation fusion reactor is estimated to be between 100 and 500 times smaller than that estimated for a fission power plant. Clearly, a significant and directed technology effort is necessary to achieve these advantages. Typical parameters have been established for magnetic fusion energy reactors, and a tokamak at moderately high magnetic field (about 7 T on axis) in the first regime of MHD stability (|8 s 3.5 I/aB) is closest to present experimental achievement. Further improvements of the economic and technological performance of the tokamak are possible through the following achievements: higher magnetic fields to lower the required plasma current and reactor size; higher values of the plasma beta, including reaching the second stable MHD regime, to lower the requirements on field and plasma current; and more efficient techniques to drive the plasma current. In addition, alternative, non-tokamak magnetic fusion approaches may offer substantive economic and operational benefits, although at present these concepts must be projected from a less developed physics base. For inertial fusion energy, reactor studies are at an earlier stage, but the essential requirements are a high efficiency ( ^ 10%) repetitively pulsed pellet driver capable of delivering up to 10 MJ of energy on target, targets capable of an energy gain (ratio of energy produced to energy on target) of about 100, reactor chambers capable of absorbing the energy released per shot at conditions consistent with power generation, and effective means of isolating the target chamber and driver system.
Thr ARIES-I tokamak is a conceptual reactor drsigii based on advanced technology and modest extrapolation from the present clay physics database. The ARIES-I blanket ntilizes SiC'/SiC' composite materials as structural material with lieliiini gas as the coolant. Until recently the brittle failure behavior of monolithic ceramic materials has posed a i~rohlem for rising ceramics as structural materials. Recent development s in nia~iiifact uring and processing of fiber-reinforced rerainics make Si<'/Sic' composites a promising candidate for future power plants. Silicon carbide composites are advantageous from a safety and waste disposal stand point because of the low activation and their very low decay after-heat respect ively. The tlienno~~iechanical properties and neutron irradiation response of SiC/SiC composite materials are reviewed. Composite design eqciations are used to approximate a window of allowable design stresses for the first wall and blanket strnctiire of the ARIES-I tokamak reactor. The ANSYS finite eleiiient structural analysis code is used to analyse the thermal and mechanical hrliavior of the first wall under normal operating conditions. [t is roncluded that with minor extrapolations from todays manufacturing experience, SiC/SiC composites offer a viable striictitral material choice thus improving the safety and environmental aspects of future fusion power plants compared with coal or imclear.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.