We have successfully developed a 1020MHz (24.0T) NMR magnet, establishing the world's highest magnetic field in high resolution NMR superconducting magnets. The magnet is a series connection of LTS (low-Tc superconductors NbTi and Nb3Sn) outer coils and an HTS (high-Tc superconductor, Bi-2223) innermost coil, being operated at superfluid liquid helium temperature such as around 1.8K and in a driven-mode by an external DC power supply. The drift of the magnetic field was initially ±0.8ppm/10h without the (2)H lock operation; it was then stabilized to be less than 1ppb/10h by using an NMR internal lock operation. The full-width at half maximum of a (1)H spectrum taken for 1% CHCl3 in acetone-d6 was as low as 0.7Hz (0.7ppb), which was sufficient for solution NMR. On the contrary, the temporal field stability under the external lock operation for solid-state NMR was 170ppb/10h, sufficient for NMR measurements for quadrupolar nuclei such as (17)O; a (17)O NMR measurement for labeled tri-peptide clearly demonstrated the effect of high magnetic field on solid-state NMR spectra.

A proof-of-principle experiment demonstrates the generation of radiation from the Cherenkov wake excited by an ultrashort- and ultrahigh-power pulse laser in a perpendicularly magnetized plasma. The frequency of the radiation is in the millimeter range (up to 200 GHz). The intensity of the radiation is proportional to the magnetic field intensity as expected by theory. Polarization of the emitted radiation is also detected. The difference in the frequency of the emitted radiation between these experiments and previous theory can be explained by the electrons' oscillation in the electric field of a narrow column of ions in the focal region.

Thermal transport measurements have been made on the Fe-based superconductor Lu2Fe3Si5 (T(c) ∼ 6  K) down to a very low temperature T(c)/120. The field and temperature dependences of the thermal conductivity confirm the multigap superconductivity with fully opened gaps on the whole Fermi surfaces. In comparison to MgB2, Lu2Fe3Si5 reveals a remarkably enhanced quasiparticle heat conduction in the mixed state. The results can be interpreted as a consequence of the unequal weight of the Fe 3d-electron character among the distinct bands.

A computational method for the simulation of particulate flows that can efficiently treat the particle-fluid boundary in systems containing many particles was developed based on the smoothed-profile lattice Boltzmann method (SPLBM). In our proposed method, which we call the improved SPLBM (iSPLBM), for an accurate and stable simulation of particulate flows, the hydrodynamic force on a moving solid particle is exactly formulated with consideration of the effect of internal fluid mass. To validate the accuracy and stability of iSPLBM, we conducted numerical simulations of several particulate flow systems and compared our results with those of other simulations and some experiments. In addition, we performed simulations on flotation of many lightweight particles with a wide range of particle size distribution, the results of which demonstrated the effectiveness of iSPLBM. Our proposed model is a promising method to accurately and stably simulate extensive particulate flows.

No abstract

No abstract

We report the operation of a discharge-produced argon (Ar) plasma waveguide in an alumina (Al(2)O(3)) capillary to guide a 10(16)-W/cm(2) ultrashort laser pulse for shorter wavelength light sources at high repetition rate operation. The electron density in the plasma channel was measured to be 1 × 10(18) cm(-3). Modeling with a one-dimensional magnetrohydrodynamic code was used to evaluate the degree of ionization of Ar in the preformed plasma channel. The observed spectrum of the laser pulse after propagation in the argon plasma waveguide was not modified and was well reproduced by a particle in cell simulation.

The synthesis of metal ion adsorbents from modified banana fibers comprising a Schiff base was investigated. The adsorption properties of a metal ion adsorbent were evaluated, and banana fiber (BF)-g-(glycidyl methacrylate)(GMA)(BF-GMA) were synthesized. A Schiff base 2,2'-{iminobis[ethane-2,1-diylnitrilo(E)methylidine]}bisphenol was synthesized via a reaction of diethylenetriamine and 5-bromo-salicyialdehyde in methanol. A metal ion adsorbent (BF-GMA(Br)) was synthesized via a reaction of the Schiff base with BF-GMA. , and Er 3+ were adsorbed in a pH range of 6.0-6.6 by the synthesized metal ion adsorbent. Almost 100% of In 3+ at a pH value of 3.0-4.0 and 95% of Ga 3+ at a pH value of 3.9 were absorbed, thereby showing the maximum adsorption percentage. Almost 15% and 25% of In 3+ was adsorbed at a pH value of 1.4-1.6 and 1.8, respectively. Adsorption of Ga 3+ was barely observed in the pH range of 1.4-1.8. These results show that banana fibers can be utilized as metal ion adsorbents.