BackgroundThe most appropriate luting agent for attaching the prefabricated Ti-based insert of hybrid abutments to its ceramic component has not yet been determined. This study was done aimed at examining the micro-shear bond strength (μSBS) of different cements to commercially pure titanium (Cp Ti).Material and MethodsA total of 100 milled cubes of Cp Ti was airborne-particle abraded using 250 μm aluminum oxide particles. Specimens were then divided into 5 groups (n=20) according to the type of resin cement used: (1) Panavia F.2, (2) Rely X U200, (3) Panavia SA LUTING Plus, (4) GC Fuji I, and (5) GC FujiCEM 2. After 24h storage, half of the samples were subjected to 5000 cycles of thermal aging. Next, the bonded samples were tested in the micro-shear mode. Data (MPa) were analyzed using a two-way ANOVA and the post hoc Tukey test (α=0.05). After debonding, each sample was examined for the failure mode classification.ResultsThe highest μSBS value in the study cements was obtained for Panavia F.2 cement (P<0.001) with no significant difference with Rely X U200 (P=0.07). The μSBS values of both GI-based cements were significantly lower than those of resin cements. Thermal aging decreased the μSBS values of all groups (P=0.003) significantly. The mainly occurred failure mode in all groups was the adhesive feature.ConclusionsResin cements demonstrated acceptable bonding to Cp Ti, yet Gl-based cements did not. From among the cements examined, Panavia F.2 can be considered as the best option for bonding to Ti.
Key words:Bond strength, Glass ionomer, Hybride abutment, Resin cement, Titanium.
Aim:The purpose of this study was to compare the marginal leakage of Class II amalgam restorations whose preparations were lined with a resin-based desensitizing agent, a self-etching adhesive system, and copal varnish.
Methods and Materials:Fifty-six freshly extracted human premolar teeth were divided into four groups. A Class II preparation was prepared with only a proximal box on the mesial and distal surfaces of each tooth. The cavities in one group were lined with a desensitizing agent (VivaSens™) and a second group with an adhesive (Clearfil S 3 Bond™). A third group was lined with copal varnish (Copalite™) and a fourth group was used as the control without any cavity liner. Spherical high copper amalgam was hand-condensed into each preparation, specimens were thermocycled, stained, and sectioned. Microleakage was graded using a stereomicroscope. Microleakage scores were calculated and analyzed using the Kruskal Wallis and the Mann-Whitney tests (α=0.05).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.