Articles you may be interested inAg2Te/As2S3: A high-contrast, top-surface imaging resist for 193 nm lithography J.Interest in thick photoresist applications is steadily growing. Besides the bump fabrication and wire interconnect technology, the process of patterning thick layer photoresists by UV lithography is specially qualified for applications in micro electro mechanical systems. Specialized equipment and new photoresists have been developed or are under development to cope with the new challenges in the field of preparing extremely thick photoresist layers, to plan the process of patterning these thick resists, and to deal with the difficulties of the following galvanoplating step. A technology called three-dimensional ͑3D͒ UV-microforming was developed, consisting of a resist preparation process for very thick photoresists ͑positive or negative tone͒, UV lithographic steps, resist development, moulding procedures by galvanodeposition, and finally stripping and cleaning for finishing the structures. A minimum width of 3 m for the resist bars was found to be necessary to withstand the fabrication process of lines and spaces in 15 m thick resist. For thicker layers high aspect ratios of more than 10 as well as steep edges of more than 88°could be fabricated. The resist patterns were moulded by using electroplating. For microsystem applications metals and alloys can be deposited into the resist patterns. 3D UV-microforming, a combination of UV patterning of thick layer resists and galvanoplating, enables the low-cost fabrication of a wide variety of micro components for many different users.
Size reduction is one of the main driving forces for packaging in nearly all electronic applications. The interaction of size reduction with highest functionality and high reliability is also predominant for all microelectronic systems. Therefore a synergism of optimal product design, smallest single chip package and board technology will give the best solution. Wafer level CSP will be the best solution for single chip packaging matching all requirements for electronic systems and reducing total cost
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.