Kondisi geografis merupakan salah satu hambatan pemasokan energi listrik melalui jaringan PLN ke perdesaan di Indonesia, sehingga masih banyak rumah tangga yang belum menikmati layanan energi listrik. Sesuai kondisi klimatologi NTT yang mempunyai musim kemarau panjang, penggunaan Pembangkit Listrik Tenaga Surya (PLTS) dipandang potensial dikembangkan. Pemanfaatan PLTS listrik surya atap di NTT saat ini mencapai 10.751 unit, namun demikian, akhir-akhir ini pemakaian PLTS mengalami beberapa permasalahan yaitu PLTS tersebut sering tidak dapat berfungsi dengan baik dan beban lampu yang dipasang menghasilkan nyala yang kurang terang. Permasalahan ini diduga berkaitan dengan faktor-faktor lingkungan seperti suhu, iluminasi radiasi sinar matahari, kelembaban dan juga letak posisi penempatan modul sel surya terhadap bumi yang kurang tepat. Tujuan penelitian ini adalah untuk membuktikan pengaruh parameter lingkungan (suhu, iluminasi radiasi sinar matahari, kelembaban) dan penempatan posisi modul terhadap luaran energi PLTS. Metode yang digunakan adalah eksperimen dan deskriptif. Hasil penelitian diketahui bahwa iluminasi radiasi sinar matahari sangat berpengaruh terhadap luaran energi PLTS, Jika Iluminasi bertambah 1 Lux maka luaran energi akan bertambah 0.001 Wh dengan asumsi suhu konstan. Kelembaban tidak berpengaruh terhadap luaran energi PLTS dan pengaruh suhu hanya dapat terlihat pada siang hari. Penempatan modul PLTS tegak lurus dengan bumi menghasilkan luaran energi optimum

No abstract

This paper presents a modeling and analysis of the levelized cost of electricity (LCoE) related to solar Photovoltaic (PV) power plants. As the PV matures, the economic feasibility of PV projects is increasingly being evaluated using the LCoE. Regulation of the Minister of Energy and Mineral Resources of the Republic of Indonesia Number 19 the Year 2016 concerning the purchase of electricity from PV Power Plants by PT PLN (Persero) for On-Grid PV in East Nusa Tenggara with a purchase of 0.23 US$ / kWh, but the purchase price of electricity for Off-Grid PV system have not been determined. The aim of this study was to analyze LCoE for PV systems so that could help policymakers and PV investors to calculate the cost of providing PV systems for rural areas, especially in Kupang Regency. The research method uses an LCoE modeling approach. The results showed that LCoE PV On-Grid system at the level of 0.19-0.21 US$/kWh, and LPoE at the level of 0.21-0.23 US$/kWh. LCoE Off-Grid PV system at the level of 0.29-0.31 US$/kWh, and LPoE at the level of 0.31-0.33 US$/kW. The result from modeling PV On-Grid System, estimated by 2030, LPoE at the maximum level of 0.24 US$/kWh.

Many researches on the low-cost solar simulators for PV module performance testing have been carried out. However, it was found that the previous designs require improvements to address the needs of PV module performance test equipment specifically for dust impact experiments. As the dust material attaching on the surface of PV module is removed easily during experiments, module position should be kept to face upwards. This study reported results of a solar simulator developed for testing characteristics of PV modules including those contaminated with dust. Test results showed that the solar simulator worked well. Voltage input and distance of halogen lamps can be adjusted to produce various light intensities received by the examined PV module. Relative difference of maximum power output (Pmax) of an examined PV module exposed to the Sun and the developed solar simulator was about 33%. The large difference was likely contributed to human errors and non-standard equipment applied during the study.

Studi kelayakan praktek perancangan instalasi mesin listrik pada Laboratorium Mesin Mesin Listrik Politeknik Negeri Kupang bertujuan untuk mengetahui kelayakan sarana dan prasarana Laboratorium Mesin Mesin Listrik khususnya tingkat kelayakan pemakaian sarana peralatan listrik untuk praktek perancangan instalasi mesin listrik. Metode yang digunakan adalah metode penelitian deskriptif, observasional dan evaluatif. Hasil penelitian menunjukkan bahwa tingkat pencapaian keseluruhan komponen baik sarana maupun prasarana yang digunakan dalam pelaksanaan praktek perancangan instalasi mesin listrik masih dalam kategori layak dengan tingkat pencapaian kelayakan maksimum 75, 52 %. Komponen penelitian yang paling rendah adalah peralatan utama dalam pelaksanaan praktek perancangan instalasi mesin listrik dengan tingkat pencapaian kelayakan 52, 33%. Komponen penelitian yang paling tinggi adalah prasarana ruang Laboratorium Mesin Mesin Listrik dengan tingkat pencapaian 87, 75%.

This study investigated the effect of dust to the performance degradation of PV street lights deployed at several areas (coastal, urban, industry, and village) in Kupang city. Results showed that maximum power output (Pmax) of all modules decreased by 9 % to 14 %. Short circuit current (Isc) was the parameter strongly affected by dust compared to open circuit voltage (Voc). Performance of the PV modules increased back to their initial conditions after cleaning. This was indicated by the increasing of Isc and Voc of the modules that leading to the escalating of their Pmax values. The worst effect of dust was exhibited by PV modules installed at coastal area. A simple analysis revealed that the module would lose 87.75 Wh of energy d–1. This study suggested that dust derating factor applied for PV street light design in Kupang should be higher than the standard (5 %).

This paper analyzes the impact of the snail trails and cracks phenomena in 200 Wp photovoltaic (PV) modules to energy output after five years of operation. Data collection was carried out through string voltage measurement, visual inspection, and Real Operating Conditions (ROC) test for permanently degraded PV especially the type of snail trail and crack degradation conducted at the Lotas Off-Grid PV System, South Central Timor Indonesia. For this paper, we applied quantitative methods to analyze data. The result shows that the permanent degradation caused by the snail trail will experience a maximum power decrease of 67 Watt per m 2 , while permanent degradation caused by crack will experience a power decrease of 551 Watt/m 2 .

No abstract