Fertilizers contain essential nutrients for agricultural growth and development. However, most nitrogen fertilizers are substances with high solubility of ions and are very susceptible to leaching and volatilization. To minimize these losses, an alternative is the creation of a physical barrier around granules. One way is to coat granules with polymers. In the present work urea granules were coated with polyhydroxybutyrate and ethyl cellulose in various conditions in the presence of emulsifiers. The original granules and the final products were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetry, to evaluate the surface morphology, the interaction between the granules and the coating, and the rates of mass change. The rates of urea release in distilled water were measured with a commercial enzyme kit. It is shown that those polymers are effective for coating of granules, leading to reduction of rates of urea dissolution in water.

The main objective of the present study is to produce copolymers of urea, acrylic acid, and glycerol through aqueous solution free‐radical polymerizations and analyze the structural, thermal, rheological, and release properties of the obtained materials. To do this, aqueous solution copolymerizations were performed in different reaction conditions and the obtained copolymers were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, rheological analyses, thermogravimetry, gel permeation chromatography, and rates of urea release in distilled water. The obtained results indicate that all constituents of the reacting mixture (potassium persulfate, glycerol, urea, and acrylic acid) affect the characteristics of the produced copolymers. In particular, it is shown that urea can be incorporated into the final copolymer through the proposed reaction scheme, that glycerol promotes crosslinking of polymer chains and that the obtained copolymer materials can be used in agricultural applications. POLYM. ENG. SCI., 55:1219–1229, 2015. © 2015 Society of Plastics Engineers

The objective of the present work was to study the incorporation of starch nanoparticles (SNP) produced by ultrasound in blends of poly(butylene adipate-co-terephthalate) (PBAT) and thermoplastic starch (TPS). The films were produced by extrusion using varying percentages of SNP (1, 2, 3, 4, and 5% w/w). The SNP were prepared in water without the addition of any chemical reagent. The results revealed that ultrasound treatment results in the formation of SNP less than 100 nm in size and of an amorphous character and lower thermal stability and low gelatinization temperature when compared with cassava starch. Scanning electron microscopy (SEM) showed that films presented some starch granules. The relative crystallinity (RC) of films decreases with increasing concentration of SNP. The addition of SNP slightly affected the thermal degradation of the films. The DSC results showed that the addition did not modify the interaction between the different components of the films. Mechanical tests revealed an increase in Young's modulus (36%) and elongation-at-break (35%) with the incorporation of 1% SNP and this concentration reduced the water vapor permeability (53%) and significantly decreased the water absorption of the films, demonstrating that low concentrations of SNP can be used as reinforcement in a polymeric matrix.

No abstract

The interest of the pharmaceutical industry in lipid drug delivery systems due to their prolonged release profile, biocompatibility, reduction of side effects, and so on is already known. However, conventional methods of preparation of these structures for their use and production in the pharmaceutical industry are difficult since these methods are usually multi-step and involve high amount of organic solvent. Furthermore, some processes need extreme conditions, which can lead to an increase of heterogeneity of particle size and degradation of the drug. An alternative for drug delivery system production is the utilization of supercritical fluid technique. Lipid particles produced by supercritical fluid have shown different physicochemical properties in comparison to lipid particles produced by classical methods. Such particles have shown more physical stability and narrower size distribution. So, in this paper, a critical overview of supercritical fluid-based processes for the production of lipid micro- and nanoparticles is given and the most important characteristics of each process are highlighted.

No abstract

Particulate formulations can significantly increase both potency and safety profiles of opioids.

Increasing non-biodegradable plastic consumption is a great factor that contributes to worldwide pollution and global warming. Mechanochemistry provides a clean, solvent-less, route for chemical reactions such as polymerization based on the absorption of mechanical energy. Urea polymers have several applications in industrial and medical area, such as paints, resins, plastic, wood glue, separating aliphatic hydrocarbons, coating, and pharmaceutical drugs. In this study, a copolymer of urea and citric acid was synthesized using a planetary ball mill as grinder with fixed reaction time and rotational speed, varying the number and material of the planetary ball mill sphere to find the effects of those two conditions in the yield percentage of the copolymer. The purified polymer was characterized by Infrared spectroscopy (FTIR) and Nuclear Magnetic Resonance – NMR. Results confirmed that polymeric material is formed by the reaction between citric acid and urea without any catalyzer using mechanochemistry. NMR results showed that the reaction occurred between urea and the acid groups at the ends of the chain, while the central COOH remained intact.