Teve-se o objetivo de estudar a influência da velocidade da semeadura na cultura da soja, com sistemas dosadores de sementes dos tipos disco alveolado horizontal e pneumático. O delineamento experimental adotado foi o em blocos ao acaso, com 05 repetições. As velocidades de semeadura foram de 4; 6; 8; 10 e 12 km h-1. As variáveis avaliadas foram: população de plantas emergidas, distribuição longitudinal e os componentes de rendimento. Aplicou-se a regressão polinomial para os sistemas de disco alveolado horizontal e pneumático, em cada variável. As regressões só foram significativas para o sistema pneumático nos espaçamentos múltiplos e aceitáveis. Os componentes de rendimento da cultura da soja não se alteraram significativamente com o incremento da velocidade de semeadura até 12 km h-1 para os sistemas dosadores de sementes dos tipos disco alveolado horizontal e pneumático.
Teve-se o objetivo de verificar a influência da velocidade de deslocamento na semeadura de milho, variando de 3,0 a 9,0 km h-1, em quatro condições. As variáveis analisadas foram: população de plantas emergidas, distribuição longitudinal, população com espigas e os componentes de rendimento. Concluiu-se que há aumento na percentagem de espaçamentos falhos e múltiplos e queda de espaçamentos aceitáveis ao se elevar a velocidade de semeadura. A produtividade só foi afetada quando a população de plantas com espigas foi reduzida pelo incremento de velocidade.
RESUMO:Teve-se o objetivo de avaliar as formas de se misturar o lubrificante sólido grafite nas sementes de milho, as dosagens e a influência desse na distribuição longitudinal e na germinação, em sementes sem e com tratamento fitossanitário, em mecanismo dosador com disco perfurado horizontal. Os fatores analisados foram: distribuição longitudinal das sementes (espaçamentos falhos, múltiplos e aceitáveis) e a porcentagem de germinação aos 7 e aos 14 dias após a instalação no germinador. Concluiu-se que o tratamento fitossanitário aumentou os espaçamentos falhos e múltiplos e reduziu os espaçamentos aceitáveis. O emprego de grafite reduziu os espaçamentos falhos e múltiplos e elevou os espaçamentos aceitáveis. A melhor forma de mistura do grafite ocorreu na máquina de tratamento fitossanitário de sementes. A distribuição longitudinal alcançou seu ponto ótimo com a dosagem de grafite de 3,37 g kg -1 de semente. As variáveis tratamento fitossanitário, mecanismo dosador e grafite não influíram na germinação das sementes de milho.PALAVRAS-CHAVE: disco perfurado horizontal, espaçamentos aceitáveis, semeadora. LONGITUDINAL DISTRIBUTION AND GERMINATION OF CORN SEEDS WITH THE USE OF PHYTOSANITARY TREATMENT AND GRAPHITE ABSTRACT:The aim was to evaluate the ways of mixing the solid lubricant graphite with corn seeds, the graphite rates, and its influence on seed longitudinal distribution and germination, with and without phytosanitary treatment, using a horizontal seed plate. The factors analyzed were: seed longitudinal distribution (skips, multiple seed drops, and acceptable spacings) and the germination rates at 7 and 14 days after placement in the germinator. It was concluded that the phytosanitary treatment increased the skips and multiples and decreased the acceptable spacings. The use of graphite decreased the number of skips and multiples and increased the acceptable spacings. The best graphite mixture occurred in the seed treatment machine. The longitudinal distribution reached its excellent point with the dosage of graphite of 3.37 g kg -1 of seed. Phytosanitary treatment, metering system, and graphite did not influence the germination of the corn seeds.KEYWORDS: horizontal seed plate, acceptable spacing, seeder. INTRODUÇÃOA qualidade na distribuição longitudinal das sementes com disco perfurado horizontal está relacionada com o ângulo de repouso das sementes no depósito, o teor de água, a presença de material estranho, a orientação das partículas e, principalmente, a rugosidade da superfície da semente (MOHSENIM, 1974).
RESUMO:Teve-se o objetivo de verificar a possível seleção de sementes de milho -arredondadas e achatadas -no processo de semeadura com disco perfurado horizontal, bem como as conseqüências na distribuição longitudinal. Os registros dos dados deram-se pela avaliação visual de duas pessoas, com contador manual, no final da esteira carpetada em movimento de 1,54 m s -1 , com 4,60 m de perspectiva para avaliação. Assim, um sensor registrava o número de orifícios do disco horizontal que devia passar pelo tubo condutor, e os espaçamentos falhos e múltiplos eram computados por pessoas diferentes. Os espaçamentos aceitáveis foram obtidos pela subtração dos espaçamentos falhos e múltiplos do total contabilizado. A medição do comprimento e espessura das sementes foi realizada com auxílio de paquímetro. Não houve alterações significativas nas variáveis estudadas, até a passagem de 55 mil orifícios do disco horizontal pelo tubo condutor; portanto, não houve seleção de sementes de milho durante a simulação do processo de semeadura. PALAVRAS-CHAVE: distribuição longitudinal, tamanho da semente. SELECTION OF CORN SEEDS DURING THE SIMULATION OF SEEDING WITH A HORIZONTAL SEED PLATEABSTRACT: The aim at this work was to verify the possibility of selection of corn seeds -round and flat -in the process of seeding with a horizontal seed plate, as well as the consequences for longitudinal distribution. Data was registered by using visual evaluation of two people that were allocated at the carpeted belt moving at 1.54 m s -1 , with a perspective of 4.60 m for evaluation. A sensor registered the number of holes in the horizontal plate that was supposed to pass through the seed drop tube this way the failing and multiple spacing were registered by different people. Acceptable spacing was obtained by the subtraction of failing and multiple spacing off the total number. Using a caliper the measurement of length and thickness of the seeds was done. The variables analyzed were: skips, multiples and acceptable spacing, and seed length and thickness. There were no significant changes in the variables up to the point when 55,000 holes of the horizontal plate had passed by the seed drop tube. Therefore, there was no corn seed selection during the simulation of seeding process. KEYWORDS: longitudinal distribution, seed size. INTRODUÇÃOA correta distribuição longitudinal das sementes é uma das características que mais contribui para a obtenção de estande adequado de plantas e de boa produtividade das culturas. Na semeadura realizada com semeadoras-adubadoras, diversos fatores interferem no estabelecimento do estande adequado de plantas, destacando-se entre eles a uniformidade das sementes e o mecanismo dosador (KURACHI et al., 1989).Com o intuito de uniformizar e facilitar a semeadura, as sementes de milho são classificadas durante o beneficiamento quanto ao tamanho, sendo separadas por peneiras (PINHO et al., 1995).
RESUMO:No sistema de disco perfurado horizontal, há cerca de 180 opções para a distribuição das peneiras de milho disponibilizadas pelas empresas produtoras de semente. A utilização de bancadas simuladoras do processo de semeadura tem sido a ferramenta empregada por empresas produtoras de sementes e discos para indicar a melhor opção para cada lote de sementes de milho. O objetivo deste trabalho foi avaliar a bancada simuladora do processo de semeadura em dois formatos, revestida com feltro e revestida com graxa. Os tratamentos foram efetuados com base no projeto de norma da ABNT (1996) e foram montados com as combinações das velocidades 3; 5; 7 e 9 km h -1 ; densidades 4,0; 4,8 e 5,6 sementes por metro e nível de sementes cheio, médio e ¼ do reservatório. O delineamento experimental adotado foi o inteiramente casualizado, com dez repetições; cada repetição conteve o total de 75 sementes. O experimento foi dividido em duas partes: na primeira, todas as variáveis foram analisadas com esteira de borracha revestida de feltro; em seguida, a esteira foi revestida com uma camada de graxa para nova avaliação das variáveis. Foram avaliados os percentuais de espaçamentos falhos, múltiplos, aceitáveis e o coeficiente de variação. Concluiu-se que não houve diferença na utilização dos dois formatos de bancada simuladora do processo de semeadura. PALAVRAS-CHAVE:velocidade de semeadura, densidade de sementes, nível do reservatório, distribuição. COMPARISON OF SIMULATING BENCHES OF CORN SEEDINGABSTRACT: There are 180 options for corn seeds distribution for all sizes released by seed companies in the horizontal seed plate system. Using simulating benches of the seeding process has been employed as a tool for the seed and plates companies for indicating the best option for each batch of seeds. The purpose of this study was to evaluate the bench simulating process of seeding in two formats, covered with felt and coated with grease. The treatments were made based on the draft rules of ABNT (1996), and were fitted with combinations of speeds of 3; 5; 7 and 9 km h -1 ; the densities of 4.0; 4.8 e 5.6 seeds m -1 and the level of seeds full, medium and ¼ of the reservoir. The treatments were arranged in a complete randomized design with ten replicates, each replicate contained a total of 75 seed. The experiment was divided in two parts, in the first all variables were analyzed with in a rubber mat lined with felt, then later the mat was coated with a layer of grease. We evaluate the percentage of failures spacing, multiple, acceptable and the coefficient of variation. It was concluded that there was no difference in the use of the two formats of bench simulating process of seeding.KEYWORDS: speed of seeding, seed density, level of the reservoir and distribution.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.