In the construction industry, the large number of residues presents a challenge for recycling and the possibility of producing new materials. This study reported the effects of the addition of polyvinyl chloride (PVC) residues and cement/alumina trihydrate on the production of a fire-resistant thermalacoustic insulation material. The composites were verified by scanning electron microscopy, the polyurethane (PU) cells were maintained with the addition of PVC, cement, and trihydrate alumina. The reduction in compressive strength for boards with 50% PVC waste as a replacement for the PU raw material. The boards showed the composites' conductivity coefficient was lower than that of the perforated brick and combustion deceleration up to flame extinction in the flammability test (UL94) because of the PVC/cement/ alumina trihydrate. They also presented cost savings (~57%) and carbon dioxide emissions (~49%) from the raw material, contributing to developing a less predatory and socio-environmentally responsible industry.
A construção de cidades causa impactos negativos ao meio ambiente, porém elas são fundamentais para a sociedade contemporânea, sendo crescente o interesse por ambientes urbanos. Este artigo trata-se de uma análise documental sobre os aspectos de consumo de água e energia elétrica do município de Governador Celso Ramos (SC), Brasil, no período de 2008 à 2017. Os resultados demonstram aumento de consumo de energia elétrica nos anos período em 69,16% para o setor residencial, 99,55% para o setor comercial e 1,68 vezes a mais para o setor industrial e o consumo de água aumentou 17,02% no mesmo período, com influência da sazonalidade. Mitigações como instalação de fontes alternativas de energia, como solar e eólica, e reaproveitamento de água da chuva e de águas cinzas podem ajudar a atender a demanda da população. Ressaltando que ações educativas devem ser adotadas pois a demanda per capita de água e energia elétrica aumentou no período de estudo. Como conclusão evidencia-se a necessidade de ações conjuntas entre prefeitura municipal, iniciativa privada, órgãos governamentais e munícipes a fim de minimizar os impactos que o crescente número de construções no município está proporcionando ao meio ambiente local.
Barboza, Costa e Gonçalves (2015) ponderam que sistemas de informação apoiam as atividades de logística e contribuem na integração dos processos, mas que a falta de soluções específicas leva as organizações a usarem medidas alternativas gerando resultados não eficientes ou esperados. É o que se observa na organização objeto deste estudo, a falta de um Sistema de Informações (SI) eficiente à gestão de estoque de insumos que possa evitar compras emergenciais que oneram os custos produtivos. Logo o objetivo deste trabalho foi sugerir um modelo de processo que permita o SI reduzir as incertezas de estoque possibilitando um Planejamento e Controle da Produção (PCP) eficiente. Realizado o estudo de caso através de pesquisa de campo, tabulação, modelagem e análise dos fluxos de processo através do Business Process Diagram (BPD), a pesquisa sugeriu alteração dos fluxos de processo que garantam o trafego eficiente de informações que possibilitem um PCP eficiente.
Cleaner Production (CP) advocates the application of preventive and integrated strategies to processes products minimizing the generation of waste and pollution. However, not always technological innovations in production bring with it an improvement for CP. The surfboard industry has been dismissive of CP. Studies revealed a concentration of the production residues on the manufacturers due to the vertical process of the production stages. Nonetheless, the incorporation of machining technology of the polyurethane blocks through Computerized Numerical Control (CNC) led to a horizontal process. The aim of this study was to map the current process, identifying the major waste producers, and detailing management for these wastes. A case study was carried out to examine the surfboard industry. The survey revealed that the links of the production chain can be accomplished by the diverse actors participating in the manufacturing industry. However, the largest amount of waste is produced by big manufacturing industries rather than small, outsourced companies. It became clear that the introduction of CNC technology was responsible for the centralization of waste production, previously distributed among all manufacturers. Technological innovation had no impact on the reduction or reuse of waste or even a better management of its disposal.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.