International audienceThe MEMS digital loudspeaker consists of a set of acoustic transducers, called speaklets, arranged in a matrix and which operate in a binary manner by emitting short pulses of sound pressure. Using the principle of additivity of pressures in the air, it is possible to reconstruct an audible sound. MEMS technology is particularly well suited to produce the large number of speaklets needed for sound reconstruction quality while maintaining a reasonable size. This paper presents for the first time the modeling, realization and characterizations of a piezoelectric digital loudspeaker based on MEMS technology. Static, dynamic and acoustic measurements are performed and match closely with theoretical results
During the last decade, piezoelectric micromachined ultrasonic transducer (pMUT) have raised a great interest for various applications. In particular, AlN material has been used to build bimorph structures made of two AlN layers sandwiched between metallic electrodes. This kind of pMUT offer good performances for both sensing and actuating because of the multi-electrodes scheme of the design. Yet, this pMUT architecture is expected to be particularly sensitive to residual stress within the AlN layers. At the wafer level, stress dispersion is likely to cause important performance variations. In this paper, we characterize bimorph pMUT working in the 50-250 kHz range to investigate how much stress variations at the wafer level (8″) impact critical pMUT features such as resonant frequency, sensitivity and quality factor. Drive sensitivity up to 216 nm/V are obtained with a single electrode scheme. Two approaches are combined, respectively based on pMUT simulation and curvature measurement, to assess the contribution of AlN residual stress to the overall tension of the diaphragm, ranging from −300 to 900 N m −1 . The resulting dispersion of resonant frequency is higher than 100%. We highlight how to obtain satisfactory yield.
This paper reports on the development of a Digital Loudspeaker Array (DLA) solution based on Pb(Zr 0.52 ,Ti 0.48 )O 3 (PZT) thinfilm actuated membranes. These membranes called speaklets are arranged in a matrix and operate in a binary manner by emitting short pulses of sound pressure. Using the principle of additivity of pressures in the air, it is possible to reconstruct audible sounds. For the first time, electromechanical and acoustic characterizations are reported on a 256-MEMS-membranes DLA. Sounds audible as far as several meters from the loudspeaker have been generated using low voltage (8V).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.