Silver nanoparticles (AgNPs) are gaining considerable importance due to their attractive physicochemical properties for many applications. In the present study, (Ag NPs) were synthesized by the reduction of aqueous solutions of silver nitrate (AgNO3) with powder and solvent extracts of Padina pavonia (brown algae). The obtained nanoparticles exhibited high stability, rapid formation of the biogenic process (2 min -3 h), small size (49.58–86.37 nm) (the diameter of formed nanoparticles was measured by TEM and DLS) and variable shapes (spherical, triangular, rectangle, polyhedral and hexagonal). Preliminary characterization of nanoparticles was monitored by using UV–visible spectroscopy (UV–vis), Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS) and finally by Fourier Transform Infrared spectroscopy (FTIR). The ratios of converted Ag NPs were recorded as 88.5; 86.2 and 90.5% in case of P. pavonia powder. extract and chloroform extract, respectively.

No abstract

No abstract

This study is intended to evaluate the cytotoxicity of native and dual-modified black rice flour against the colon cancer cell line (HCT116) and mouse embryo cell line (3T3-L1) by using the MTT assay. The modification techniques applied to prepare rice flour samples were enzymatic modification and heat moisture treatment. In this study, the IC50 of native black rice flour and modified black rice flour was 255.78 µg/mL and 340.85 µg/mL, respectively. The result confirms that the native black rice flour has significant cytotoxic and anticancer potential against human colon cancer cells. In addition, the IC50 of native black rice flour and modified black rice flour on the 3T3-L1 cell line was found to be 345.96 µg/mL and 1106.94 µg/mL, respectively. The results showed that the native black rice flour had weak cytotoxicity, and modified black rice flour was nontoxic in both the cell lines. The active component of phytochemicals present in black rice flour has a potential role in preventing colon cancer.

The primary goal of this work is to evaluate how BN and WC particles affect the mechanical properties and damage development behaviours of aluminum alloy-2048. Heat treatments for composites are also being investigated to improve mechanical properties. Tensile experiments reveal that BN particle reinforcement outperforms WC reinforcement in strength and flexibility for composites. T4 treatment, rather than traditional peak-aging treatment, is recommended for the composites (T6). The particle size distribution in 10v% WC/Al-2048 is the best in the three composites with the largest size of 16 µm and 80% of particles are from 6 to 10 µm. Tensile tests illustrate that 15v% BN/Al-2048 composite demonstrates a 9 and 14% rise in its ultimate tensile stress and 28 and 120% increases in its elongation. T4 heat treatment with an additional 0.6 percent prestrain can produce composites with the same UTS and 0.2 percent proof stress as T6 treatment, but the ultimate elongation below T4 treatment is over 100 percent more than that under T6 treatment. To make sense of the test results, an observation of the damage evolution behaviors of the reinforcing particles provides a concept that the composites’ strength is primarily determined by the balance between the reinforcing particles sharing the load and creating strain discontinuity in the matrix. The fraction of broken particles in the 20v% WC/Al-2048 composite as a function of strain is much higher than that in the 15v% BN/Al-2048 composite. Because of their tolerance for substantial strain at the interface, maximum K1c, and moderate thermal extension, BN elements can share a lot of loads and provide more excellent reinforcement than WC particles in terms of composite strength and flexibility.

No abstract

This study examined the ability of the green microalgae Chlorella vulgaris to remove arsenic from aqueous solutions. A series of studies was conducted to determine the optimal conditions for biological arsenic elimination, including biomass amount, incubation time, initial arsenic level, and pH values. At 76 min, pH 6, 50 mgL−1 metal concentration, and 1 gL−1 bio-adsorbent dosage, the maximum removal of arsenic from an aqueous solution was 93%. The uptake of As (III) ions by C. vulgaris reached an equilibrium at 76 min of bio-adsorption. The maximum adsorptive rate of arsenic (III) by C. vulgaris was 55 mg/gm. The Langmuir, Freundlich, and Dubinin–Radushkevich equations were used to fit the experimental data. The best theoretical isotherm of Langmuir, Freundlich, or/and Dubinin–Radushkevich for arsenic bio-adsorption by Chlorella vulgaris was determined. To choose the best theoretical isotherm, the coefficient of correlation was used. The data on absorption appeared to be linearly consistent with the Langmuir (qmax = 45 mgg−1; R2 = 0.9894), Freundlich (kf = 1.44; R2 = 0.7227), and Dubinin–Radushkevich (qD–R = 8.7 mg/g; R2 = 0.951) isotherms. The Langmuir and Dubinin–Radushkevich isotherms were both good two-parameter isotherms. In general, Langmuir was demonstrated to be the most accurate model for As (III) bio-adsorption on the bio-adsorbent. Maximum bio-adsorption values and a good correlation coefficient were observed for the first-order kinetic model, indicating that it was the best fitting model and significant in describing the arsenic (III) adsorption process. SEM micrographs of treated and untreated algal cells revealed that ions adsorbed on the algal cell’s surface. A Fourier-transform infrared spectrophotometer (FTIR) was used to analyze the functional groups in algal cells, such as the carboxyl group, hydroxyl, amines, and amides, which aided in the bio-adsorption process. Thus, C. vulgaris has great potential and can be found in eco-friendly biomaterials capable of adsorbing arsenic contaminants from water sources.

No abstract