No abstract

This paper reviews the current status and future trends of aluminized explosives. The major focus is on cast compositions, which encompass both the melt-cast trinitrotoluene (TNT) based and the slurry cast polymer-based compositions. Widely reported RDX and HMX based aluminized compositions with TNT used as a binder are discussed in detail. Various researchers have suggested a 15-20% Al content as an optimum from the viewpoint of velocity of detonation. A higher Al content, however, is incorporated in most of the compositions for a sustained blast effect, due to the potential of secondary reactions of Al with detonation products. The effect of the aluminum particle size on performance parameters (velocity of detonation, etc.) is included. There are some recent works on nanometric Al based compositions, and the results obtained by various researchers suggest mixed trends for RDX-TNT compositions. Studies on nitrotriazol and TNT based compositions bring out their low vulnerability. Some of the interesting findings on ammonium dinitramide and bis(2,2,2-trinitro-ethyl)nitramine (BTNEN) based compositions are also included. The review brings out superiority of polymer based aluminized explosives, as compared to conventional TNT based compositions, particularly, with respect to low vulnerability. In general, aluminized plastic bonded explosives find numerous underwater applications. Ammonium perchlorate (AP) is also incorporated, particularly, for enhancing underwater shock wave and bubble energy. Hydroxyl terminated polybutadiene appears to be the binder of choice. However, nitrocellulose, polyethylene glycol, and polycaprolactone polymer based compositions with energetic plasticizers, like bis-dinitropropyl acetal/formal (BDNPA/F, 1/1 mix), trimethylol ethane trinitrate, and triethylene glycol dinitrate are also investigated. Polyethylene glycol and polycaprolactone polymer based compositions are found to be low vulnerable, particularly, in terms of shock sensitivity. Highly insensitive polymer bonded nitrotriazol based compositions are being pursued all over the globe. The highly insensitive CL-20/AP combination meets the demands of high density and high velocity of detonation. Glycidyl azide polymer and poly nitratomethyl methyl oxetane appear to be binders of interest for plastic bonded explosives in view of their superior energetics. The vulnerability aspects of these compositions, however, need to be studied in detail. Brief information on plastic bonded and gelled thermobaric explosives is also included.

The near-infrared difference spectra of 18-crown-6 in aqueous solutions have been obtained in the 1350−1650 nm region. Resolution of the difference spectra yielded the spectra of hydrated 18-crown-6 molecule and with the help of density data has allowed the determination of hydration numbers of 18-crown-6 at different concentrations (0.5−4 m). The hydration number obtained at 1 m concentration of 18-crown-6 is about ∼20, while at higher concentrations the value is around 4. These results have been interpreted in terms of hydrophobic hydration of 18-crown-6 in the dilute concentration region, resulting in clathratelike equilibria, while at higher concentrations, four water molecules remain hydrogen-bonded to the crown ether ring having D 3 d conformation. These complexed water molecules have been further differentiated into two types: (i) two water molecules doubly hydrogen-bonded (bridging) to the crown ether oxygen atoms and (ii) the other two singly hydrogen-bonded to the remaining oxygen atoms and rapidly exchangeable.

No abstract

No abstract

No abstract

No abstract

Purpose – The purpose of this article is to study the effect of ferrite content on electric, magnetic and microwave properties of screen-printed y(Ni0.4Co0.2Cd0.4Fe2O4) + (1 − y)Pb(Zr0.52Ti0.48)O3 (y = 0.0, 0.15, 0.30, 0.45, 1.0) thick films on alumina. Design/methodology/approach – Thick films of ferrite–ferroelectric composite on alumina substrate have been delineated using screen printing technique. The structural analysis was carried out using X-ray diffraction method and scanning electron microscopy. The DC electrical resistivity was measured using the two-probe method. The magnetic measurement was carried out using a vibrating sample magnetometer. Microwave absorption was studied in the 8-18 GHz frequency range by using the vector network analyzer (N5230A). The permittivity in the 8-18 GHz frequency range was measured by using voltage standing wave ratio slotted section method. Findings – The formation of two individual ferrite–ferroelectric phases in composite thick films was confirmed by the X-ray diffraction patterns. The scanning electron microscope morphologies show the growth of cobalt-substituted nickel cadmium ferrite grains which are well dispersed in lead zirconium titanate matrix. The DC electrical resistivity increases with increase in ferrite content and decreases with increase in temperature. The present ferrite shows ferromagnetic nature and it increases saturation magnetization and coercivity of the composite thick films. Tuning properties are observed in the Ku-band and broadband X-band microwave absorption is observed in the composite thick films. The imaginary part of permittivity increases with an increase in ferrite content, which increases microwave absorption. The real part of microwave permittivity varied from 17 to around 22 with an increase in ferrite content and it decreases with frequency. The microwave conductivity, which increases with an increase in ferrite content, reveals the loss of polaron conduction, which supports the dielectric loss in the microwave region. Originality/value – Electric, magnetic and microwave properties of screen-printed y(Ni0.4Co0.2Cd0.4Fe2O4) + (1 − y)Pb(Zr0.52Ti0.48)O3 (y = 0.0, 0.15, 0.30, 0.45, 1.0) composite thick films on alumina substrate is reported for the first time.