A challenge in the design and optimisation of the vehicle front structures is the high computational costs required for crash analysis. A methodological approach to simplifying Finite Element (FE) vehicle models and crash barriers is presented in this paper. The methodology uses global deformation characteristics of structures which are obtained from the global crash model. For the simplification of the vehicle crash model, structural regions which sustain only elastic deformations during the frontal crash are replaced by kinematic numerical representations which describe both stiffness and load paths at the interface of the substituted structures. Verification studies of the simplified vehicle model show a very good agreement of the global and local structural response during the frontal crash. Further simplifications were applied to the offset deformable barrier (ODB) by replacing its detailed crushing behaviour by kinematic descriptions. Through the combined use of both simplified numerical representations, the computational cost of a Euro NCAP offset crash analysis can be reduced by around 92%. With the obtained time reduction, structural optimisation studies of the remaining structure can be conducted efficiently for the identification of weight reduction potentials.
For certification, novel fuselage concepts have to prove equivalent crashworthiness standards compared to the existing metal reference design. Due to the brittle failure behaviour of CFRP this requirement can only be fulfilled by a controlled progressive crash kinematics. Experiments showed that the failure of a twin-walled fuselage panel can be controlled by a local modification of the core through-thickness compression strength. For folded cores the required change in core properties can be integrated by a modification of the fold pattern. However, the complexity of folded cores requires a virtual design methodology for tailoring the fold pattern according to all static and crash relevant requirements. In this context a foldcore micromodel simulation method is presented to identify the structural response of a twin-walled fuselage panels with folded core under crash relevant loading condition. The simulations showed that a high degree of correlation is required before simulation can replace expensive testing. In the presented studies, the necessary correlation quality could only be obtained by including imperfections of the core material in the micromodel simulation approach.
The paper presents an homogenised core model suitable for use in the analysis of fuselage sandwich panels with folded composite cores under combined loading conditions. Within a multiscale numerical design process a failure criterion was derived for describing the macroscopic behaviour of folded cores under combined loading using a detailed foldcore micromodel. The multiscale modelling method was validated by simulation of combined compression/bending failure of foldcore sandwich panels.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.