In recent years, substantial progress has been made in developing perovskite light-emitting diodes with near-infrared, red and green emissions and over 20% external quantum efficiency. However, the development of perovskite light-emitting diodes with blue emission remains a great challenge, which retards further development of full-color displays and white-light illumination based on perovskite emissive materials. Here, firstly, through composition and dimensional engineering, we prepare quasi-two-dimensional perovskite thin films with improved blue emission, taking advantages of reduced trap density and enhanced photoluminescence quantum yield. Secondly, we find a vertically non-uniform distribution of perovskite crystals in the PEDOT:PSS/perovskite hybrid film. Through modulating the position of the recombination zone, we activate the majority of quasi-two-dimensional perovskite crystals, and thus demonstrate the most efficient blue perovskite light-emitting diode to date with emission peak at 480 nm, record luminance of 3780 cd m −2 and record external quantum efficiency of 5.7%.

All-inorganic perovskite solar cells (PVSCs) have drawn increasing attention because of their outstanding thermal stability. However, their performance is still inferior than the typical organic-inorganic counterparts, especially for the devices with p-in configuration. Herein, we successfully employ a Lewis base small molecule to passivate the inorganic perovskite film, and its derived PVSCs achieved a champion efficiency of 16.1% and a certificated efficiency of 15.6% with improved photostability, representing the most efficient inverted all-inorganic PVSCs to date. Our studies reveal that the nitrile (C-N) groups on the small molecule effectively reduce the trap density of the perovskite film and thus significantly suppresses the non-radiative recombination in the derived PVSC by passivating the Pb-exposed surface, resulting in an improved open-circuit voltage from 1.10 V to 1.16 V after passivation. This work provides an insight in the design of functional interlayers for improving efficiencies and stability of all-inorganic PVSCs.

A synergic interface design is demonstrated for photostable inorganic mixed‐halide perovskite solar cells (PVSCs) by applying an amino‐functionalized polymer (PN4N) as cathode interlayer and a dopant‐free hole‐transporting polymer poly[5,5′‐bis(2‐butyloctyl)‐(2,2′‐bithiophene)‐4,4′‐dicarboxylate‐alt‐5,5′‐2,2′‐bithiophene] (PDCBT) as anode interlayer. First, the interfacial dipole formed at the cathode interface reduces the workfunction of SnO2, while PDCBT with deeper‐lying highest occupied molecular orbital (HOMO) level provides a better energy‐level matching at the anode, leading to a significant enhancement in open‐circuit voltage (Voc) of the PVSCs. Second, the PN4N layer can also tune the surface wetting property to promote the growth of high‐quality all‐inorganic perovskite films with larger grain size and higher crystallinity. Most importantly, both theoretical and experimental results reveal that PN4N and PDCBT can interact strongly with the perovskite crystal, which effectively passivates the electronic surface trap states and suppresses the photoinduced halide segregation of CsPbI2Br films. Therefore, the optimized CsPbI2Br PVSCs exhibit reduced interfacial recombination with efficiency over 16%, which is one of the highest efficiencies reported for all‐inorganic PVSCs. A high photostability with a less than 10% efficiency drop is demonstrated for the CsPbI2Br PVSCs with dual interfacial modifications under continuous 1 sun equivalent illumination for 400 h.

NiO is a promising hole transporting material for perovskite solar cells due to its high hole mobility, good stability, easy processibility, and suitable Fermi level for hole extraction. However, the efficiency of NiO‐based cells is still limited by the slow hole extraction due to the poor perovskite/NiO interface and the inadequate quality of the two solution‐processed material phases. Here, large influences of a monolayer surface modification of NiO nanocrystal layers with ethanolamine molecules are demonstrated on the enhancement of hole extraction/transport and thus the photovoltaic performance. The underlying causes have been revealed by a series of studies, pointing to a favorable dipole layer formed by the molecular adsorption along with the enhanced perovskite crystallization and the improved interface contact. Comparatively, the solar cells based on a diethanolamine‐modified NiO layer have achieved a rather high fill factor, indeed one of the highest among NiO‐based perovskite solar cells, and high short‐circuit photocurrent density (Jsc), resulting in a power conversion efficiency of ≈16%, most importantly, without hysteresis.

In this work, a SnO /ZnO bilayered electron transporting layer (ETL) aimed to achieve low energy loss and large open-circuit voltage (V ) for high-efficiency all-inorganic CsPbI Br perovskite solar cells (PVSCs) is introduced. The high-quality CsPbI Br film with regular crystal grains and full coverage can be realized on the SnO /ZnO surface. The higher-lying conduction band minimum of ZnO facilitates desirable cascade energy level alignment between the perovskite and SnO /ZnO bilayered ETL with superior electron extraction capability, resulting in a suppressed interfacial trap-assisted recombination with lower charge recombination rate and greater charge extraction efficiency. The as-optimized all-inorganic PVSC delivers a high V of 1.23 V and power conversion efficiency (PCE) of 14.6%, which is one of the best efficiencies reported for the Cs-based all-inorganic PVSCs to date. More importantly, decent thermal stability with only 20% PCE loss is demonstrated for the SnO /ZnO-based CsPbI Br PVSCs after being heated at 85 °C for 300 h. These findings provide important interface design insights that will be crucial to further improve the efficiency of all-inorganic PVSCs in the future.

Solution processed zinc oxide (ZnO) nanoparticles (NPs) with excellent electron transport properties and a low-temperature process is a viable candidate to replace titanium dioxide (TiO2) as electron transport layer to develop high-efficiency perovskite solar cells on flexible substrates. However, the number of reported high-performance perovskite solar cells using ZnO-NPs is still limited. Here we report a detailed investigation on the chemistry and crystal growth of CH3NH3PbI3 perovskite on ZnO-NP thin films. We find that the perovskite films would severely decompose into PbI2 upon thermal annealing on the bare ZnO-NP surface. X-ray photoelectron spectroscopy (XPS) results show that the hydroxide groups on the ZnO-NP surface accelerate the decomposition of the perovskite films. To reduce the decomposition, we introduce a buffer layer in between the ZnO-NPs and perovskite layers. We find that a commonly used buffer layer with small molecule [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) can slow down but cannot completely avoid the decomposition. On the other hand, a polymeric buffer layer using poly(ethylenimine) (PEI) can effectively separate the ZnO-NPs and perovskite, which allows larger crystal formation with thermal annealing. The power conversion efficiencies of perovskite photovoltaic cells are significantly increased from 6.4% to 10.2% by replacing PC61BM with PEI as the buffer layer.

Semi-transparent photovoltaic (ST-PV) technologies can be applied to replace facades and roofs in conventional buildings and coatings on vehicles to produce energy from sunlight.

Adding 2-phenoxyethylamine (POEA) into a CH NH PbBr precursor solution can modulate the organic-inorganic hybrid perovskite structure from bulk to layered, with a photoluminescence and electroluminescence shift from green to blue. Meanwhile, POEA can passivate the CH NH PbBr surface and help to obtain a pure CH NH PbBr phase, leading to an improvement of the external quantum efficiency to nearly 3% in CH NH PbBr LED.