The increasingly intimate bond connecting soft actuation devices and emerging biomedical applications is triggering the development of novel materials with superb biocompatibility and a sensitive actuation capability that can reliably function as bio-use-oriented actuators in a human-friendly manner. Stimulus-responsive hydrogels are biocompatible with human tissues/organs, have sufficient water content, are similar to extracellular matrices in structure and chemophysical properties, and are responsive to external environmental stimuli, and these materials have recently attracted massive research interest for fabricating bioactuators. The great potential of employing such hydrogels that respond to various stimuli (e.g., pH, temperature, light, electricity, and magnetic fields) for actuation purposes has been revealed by their performances in real-time biosensing systems, targeted drug delivery, artificial muscle reconstruction, and cell microenvironment engineering. In this review, the material selection of hydrogels with multiple stimulusresponsive mechanisms for actuator fabrication is first introduced, followed by a detailed introduction to and discussion of the most recent progress in emerging biomedical applications of hydrogel-based bioactuators. Final conclusions, existing challenges, and upcoming development prospects are noted in light of the status quo of bioactuators based on stimulus-responsive hydrogels.

To eliminate nitrogen oxides (NOx), a series of highly ordered mesoporous WO3(χ)-CeO2 nanomaterials (χ represents the mole ratio of W/Ce) were synthesized by using KIT-6 as a hard template, which was used for selective catalytic reduction (SCR) to remove NOx with NH3 at low temperatures. Moreover, the nanomaterials were characterized by TEM, XRD, Raman, XPS, BET, H2-TPR, NH3-TPD and in situ DRIFTS. It can be found that all of the prepared mesoporous WO3(χ)-CeO2 (χ = 0, 0.5, 0.75, 1 and 1.25) showed highly ordered mesoporous channels. Furthermore, mesoporous WO3(1)-CeO2 exhibited the best removal efficiency of NOx, and its NOx conversion ratio could reach 100% from 225 ° C to 350 ° C with a gas hourly space velocity of 30 000 h−1, which was due to higher Ce3+ concentrations, abundant active surface oxygen species and Lewis acid sites based on XPS, H2-TPR, NH3-TPD and in situ DRIFTS. In addition, several key performance parameters of mesoporous WO3(1)-CeO2, such as superior water resistance, better alkali metal resistance, higher thermal stability and N2 selectivity, were systematically studied, indicating that the synthesized mesoporous WO3(1)-CeO2 has great potential for industrial applications.

No abstract

Our study indicated that miR-132 plays an important role in the invasion and metastasis of CRC.

No abstract

Adhesion between electrospun polycaprolactone (PCL) fibers was directly measured in a cross-cylinder geometry using a nanoforce tensile tester. The surface roughness of fibers was determined by an atomic force microscope (AFM), and the structural factors were characterized by differential scanning calorimeter (DSC) and wide-angle X-ray diffraction (WAXD). "Pull-off" force was found to be in the order of 10(-6) N, and the adhesion energy was 190 +/- 7 mJ/m(2). Adhesion increases with decreasing fiber radius. The experimental data are analyzed by the classical Johnson-Kendall-Roberts (JKR) contact mechanics model. The study provides fruitful insights into future development of bio-inspired adhesives and devices.

In this article, a facile approach to fabricate a biofunctional polypropylene nonwoven fabric membrane (PP NWF) with a switchable surface from antibacterial property to hemocompatibility is presented. In the first step, a cationic carboxybetaine ester monomer, [(2-(methacryboxy) ethyl)]-N,N-dimethylamino-ethylammonium bromide, methyl ester (CABA-1-ester) was synthesized. Subsequently, this monomer was introduced on the PP NWF surface via plasma pretreatment and a UV-induced graft polymerization technique. Finally, a switchable surface from antibacterial property to hemocompatibility was easily realized by hydrolysis of poly(CABA-1-ester) moieties on the PP NWF surface under mild conditions. Surface hydrolysis behaviors under different pH conditions were investigated. These PP NWFs grafted with poly(CABA-1-ester) segments can cause significant suppression of S. aureus proliferation; after hydrolysis, these surfaces covered by poly[(2-(methacryloxy) ethyl)] carboxybetaine (poly(CABA)) chains exhibited obvious reduction in protein adsorption and platelet adhesion, and remarkably enhanced antithrombotic properties. This strategy demonstrated that a switchable PP NWF surface from antibacterial property to hemocompatibility was easily developed by plasma pretreatment and UV-induced surface graft polymerization and that this surface may become an attractive platform for a range of biomedical applications.

Currently, the specific capacity and cycling performance of various MoS /carbon-based anode materials for Na-ion storage are far from satisfactory due to the insufficient structural stability of the electrode, incomplete protection of MoS by carbon, difficult access of electrolyte to the electrode interior, as well as inactivity of the adopted carbon matrix. To address these issues, this work presents the rational design and synthesis of 3D interconnected and hollow nanocables composed of multiwalled carbon@MoS @carbon. In this architecture, (i) the 3D nanoweb-like structure brings about excellent mechanical property of the electrode, (ii) the ultrathin MoS nanosheets are sandwiched between and doubly protected by two layers of porous carbon, (iii) the hollow structure of the primary nanofibers facilitates the access of electrolyte to the electrode interior, (iv) the porous and nitrogen-doping properties of the two carbon materials lead to synergistic Na-storage of carbon and MoS . As a result, this hybrid material as the anode material of Na-ion battery exhibits fast charge-transfer reaction, high utilization efficiency, and ultrastability. Outstanding reversible capacity (1045 mAh g ), excellent rate behavior (817 mAh g at 7000 mA g ), and good cycling performance (747 mAh g after 200 cycles at 700 mA g ) are obtained.