No abstract

No abstract

Rapid and effective hemostatic materials have received wide attention not only in the battlefield but also in hospitals and clinics. Traditional hemostasis relies on materials with little designability which has many limitations. Nanohemostasis has been proposed since the use of peptides in hemostasis. Nanomaterials exhibit excellent adhesion, versatility, and designability compared to traditional materials, laying a good foundation for future hemostatic materials. This review first summarizes current hemostatic methods and materials, and then introduces several cutting‐edge designs and applications of nanohemostatic materials such as polypeptide assembly, electrospinning of cyanoacrylate, and nanochitosan. Particularly, their advantages and working mechanisms are introduced. Finally, the challenges and prospects of nanohemostasis are discussed.

Rapid capture and detection of airborne pathogen are essential for disease prevention and public safety. In this study, we presented a microfluidic system that could capture and enrich airborne pathogens as well as performing high-throughput LAMP analysis. The system was validated by five species of bacteria and showed good stability and specificity. Detection limit down to approximately 24 cells per reaction was achieved for Staphylococcus aureus, and without the process of DNA purification. To the best of our knowledge, this is the first report to describe a microfluidic system for airborne pathogen capture and high-throughput LAMP analysis. The results could be detected by the naked eye, suggesting that the system could have great potential application in clinical diagnostics and point-of-care detection.

Point cloud based 3D visual representation is becoming popular due to its ability to exhibit the real world in a more comprehensive and immersive way. However, under a limited network bandwidth, it is very challenging to communicate this kind of media due to its huge data volume. Therefore, the MPEG have launched the standardization for point cloud compression (PCC), and proposed three model categories, i.e., TMC1, TMC2, and TMC3. Because the 3D geometry compression methods of TMC1 and TMC3 are similar, TMC1 and TMC3 are further merged into a new platform namely TMC13. In this paper, we first introduce some basic technologies that are usually used in 3D point cloud compression, then review the encoder architectures of these test models in detail, and finally analyze their rate distortion performance as well as complexity quantitatively for different cases (i.e., lossless geometry and lossless color, lossless geometry and lossy color, lossy geometry and lossy color) by using 16 benchmark 3D point clouds that are recommended by MPEG. Experimental results demonstrate that the coding efficiency of TMC2 is the best on average (especially for lossy geometry and lossy color compression) for dense point clouds while TMC13 achieves the optimal coding performance for sparse and noisy point clouds with lower time complexity.

No abstract

No abstract

No abstract