Direct
manufacturing of customized end-use electronic products
is becoming an emerging trend of additive manufacturing (AM). This
highly demands the evolution of the conventional AM processes from
simply building single-material parts to simultaneously delivering
complex structures and end-use functionalities. In this work, we propose
a novel hybrid additive manufacturing solution that combines stereolithography
(SLA) three-dimensional (3D) printing and laser-activated electroless
plating for the manufacture of 3D fully functional electronic products.
With our newly developed functional SLA resin that can be 3D printed,
laser-activated, and thereafter selectively metalized, high-resolution
circuitry can be free-formly patterned on 3D structures. In virtue
of high-performance electrical materials, this technology is capable
of creating not only 3D direct-current (DC) electronics but also 3D
high-frequency devices like microwave/millimeter-wave antennas, which
cannot be fabricated via traditional printed circuit board (PCB) technology
and not even by most AM processes. This study represents a significant
advance in additive manufacturing technologies, and more importantly
offers a unique opportunity for the mass customization of fully functional
3D electronic products, which shows great potentials in consumer electronics,
communication engineering, and automobile and aerospace industries.
Ceramic electronics have the advantages of large ampacity, high thermal conductivity, and excellent dielectric properties which are widely used in power electronics, optoelectronics, automotive industry, and aerospace technology. This work proposes a multimaterial dispensing additive manufacturing technology for customizing the 3D low‐temperature‐cofired ceramic (LTCC) circuitry. Customized LTCC aqueous slurry is first developed and then 3D printed together with commercial silver paste to build the green body. Then, the green body is debinded and sintered with a three‐stage process at 200, 500, and 850 °C, respectively. The shrinkage rate in 3D is around 17% which is comparable with commercial LTCCs. The surface quality of the sintered ceramic is improved obviously compared with that of the green body due to the glazing effect of the glass phase. For the silver conductor, the resistivity and the temperature coefficient of resistance are 2.34 ± 0.04 µΩ cm and 3.56 × 10−3 °C−1, respectively. A serial of demonstrators including 2D, 3D light‐emitting diode ceramic circuit boards and a ceramic heater/thermometer is developed to prove the potential and feasibility of the proposed technology.
With increasing interest in the rapid
development of customized
ceramic electronics, hybrid additive manufacturing (HAM) technology
has become a competent alternative to traditional solutions such as
printed circuit boards and cofired ceramic technology. Herein, the
novel HAM technology is proposed by combining a dispensing three-dimensional
(3D) printing process and selectively laser-activated electroless
plating for fabricating 3D fully functional ceramic electronic products.
An appropriative 3D-printable and metalizable low-temperature cofired
ceramic slurry is developed to build the green body of ceramic electronics.
After the debinding and sintering process, the 3D ceramic structure
can be selectively laser-activated and then electrolessly plated to
achieve electronic functionality. The thickness of the plated copper
layer approaches 10 μm after 4 h of plating, and the electrical
conductivity is 5.5 × 107 S m–1,
which is close to pure copper (5.8 × 107 S m–1). To reduce the surface roughness of the laser-activated ceramic
surface and thereby enhance the conductivity of the copper layer,
the laser parameters are optimized as a 1250 mm s–1 scan speed, a 0.4 W laser power, and a 20 kHz laser-spot frequency.
A high-power 3D light-emitting diode circuit board with an internal
cooling channel is successfully developed to prove the feasibility
of this HAM technology for customizing fully functional 3D conformal
ceramic electronics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.