No abstract

No abstract

A novel technique that uses polymer nanoparticles as pseudostationary phase in capillary electrochromatography with electrospray ionization mass spectrometry detection is described. A continuous full filling technique in which the nanoparticles were suspended in the entire electrolyte volume as well as a conventional partial filling technique is presented. No nanoparticles entered the mass spectrometer, which was fitted with an orthogonal electrospray interface, despite the continuous flow of nanoparticles into the interface. Nanoparticles (average diameter 160 nm) were prepared from methacrylic acid, methyl methacrylate, and trimethylolpropane trimethacrylate by utilizing a precipitation polymerization technique. Salbutamol, nortriptyline, and diphenhydramine were used as analytes. The interaction between analytes and nanoparticles was found to be predominantly ionic.

Two-dimensional liquid chromatography (2D-LC) is increasingly being viewed as a viable tool for solving difficult separation problems, ranging from targeted separations of structurally similar molecules to untargeted separations of highly complex mixtures. In spite of this performance potential, though, many users find method development challenging and most frequently cite the "incompatibility" between the solvent systems used in the first and second dimensions as a major obstacle. This solvent strength related incompatibility can lead to severe peak distortion and loss of resolution and sensitivity in the second dimension. In this paper, we describe a novel approach to address the incompatibility problem, which we refer to as Active Solvent Modulation (ASM). This valve-based approach enables dilution of D effluent with weak solvent prior to transfer to theD column but without the need for additional instrument hardware. ASM is related to the concept we refer to as Fixed Solvent Modulation (FSM), with the important difference being that ASM allows toggling of the diluent stream during each D separation cycle. In this work, we show that ASM eliminates the major drawbacks of FSM including complex elution solvent profiles, baseline disturbances, and slowD re-equilibration and demonstrate improvements in D separation quality using both simple small molecule probes and degradants of heat-treated bovine insulin as case studies. We believe that ASM will significantly ease method development for 2D-LC, providing a path to practical methods that involve both highly complementaryD and D separations and sensitive detection.

Highly efficient reversed-phase capillary electrochromatography (CEC) separations (plate numbers up to 700 000/m), with electrospray ionization mass spectrometry detection were achieved utilizing novel dextran-coated polymer nanoparticles as a pseudostationary phase. A continuous full filling (CFF) technique in which nanoparticles are continuously introduced into the capillary was employed for separation of neutral analytes (dialkyl phthalates), utilizing an orthogonal electrospray interface to prevent nanoparticles from entering the mass spectrometer. CFF-CEC benefits from that an entirely fresh column is employed for every analysis, avoiding carryover effects associated with stationary-phase contamination. The highly efficient separations obtained were accomplished by optimizing the organic modifier concentration in the electrolyte and by using a high nanoparticle concentration (5 mg/mL), to improve interparticle mass transfer and gain sufficient retention. Nanoparticles, with an average diameter of 600 nm, were prepared by polymerization of methacrylic acid and trimethylolpropane trimethacrylate, which in turn were coated with dextran. These nanoparticles formed stable suspensions in electrolytes having broad ranges of polarities, enabling straightforward optimization of the reversed-phase conditions.