Abstract-Polar codes provably achieve the symmetric capacity of a memoryless channel while having an explicit construction. The adoption of polar codes however, has been hampered by the low throughput of their decoding algorithm. This work aims to increase the throughput of polar decoding hardware by an order of magnitude relative to successive-cancellation decoders and is more than 8 times faster than the current fastest polar decoder. We present an algorithm, architecture, and FPGA implementation of a flexible, gigabit-per-second polar decoder.

Abstract-Polar codes asymptotically achieve the symmetric capacity of memoryless channels, yet their error-correcting performance under successive-cancellation (SC) decoding for short and moderate length codes is worse than that of other modern codes such as low-density parity-check (LDPC) codes. Of the many methods to improve the error-correction performance of polar codes, list decoding yields the best results, especially when the polar code is concatenated with a cyclic redundancy check (CRC). List decoding involves exploring several decoding paths with SC decoding, and therefore tends to be slower than SC decoding itself, by an order of magnitude in practical implementations. In this paper, we present a new algorithm based on unrolling the decoding tree of the code that improves the speed of list decoding by an order of magnitude when implemented in software. Furthermore, we show that for software-defined radio applications, our proposed algorithm is faster than the fastest software implementations of LDPC decoders in the literature while offering comparable error-correction performance at similar or shorter code lengths.

Abstract-The capacity-achieving property of polar codes has garnered much recent research attention resulting in lowcomplexity and high-throughput hardware and software decoders. It would be desirable to implement flexible hardware for polar encoders and decoders that can implement polar codes of different lengths and rates, however this topic has not been studied in depth yet. Flexibility is of significant importance as it enables the communications system to adapt to varying channel conditions and is mandated in most communication standards. In this work, we describe a low-complexity and flexible systematicencoding algorithm, prove its correctness, and use it as basis for encoder implementations capable of encoding any polar code up to a maximum length. We also investigate hardware and software implementations of decoders, describing how to implement flexible decoders that can decode any polar code up to a given length with little overhead and minor impact on decoding latency compared to code-specific versions. We then demonstrate the application of the proposed decoder in a quantum key distribution setting, in conjunction with a new sum-product approximation to improve performance.

Among error-correcting codes, polar codes are the first to provably achieve channel capacity with an explicit construction. In this work, we present software implementations of a polar decoder that leverage the capabilities of modern general-purpose processors to achieve an information throughput in excess of 200 Mbps, a throughput well suited for software-defined-radio applications. We also show that, for a similar error-correction performance, the throughput of polar decoders both surpasses that of LDPC decoders targeting general-purpose processors and is competitive with that of state-of-the-art software LDPC decoders running on graphic processing units.

Polar codes are widely considered as one of the most exciting recent discoveries in channel coding. For short to moderate block lengths, their error-correction performance under list decoding can outperform that of other modern errorcorrecting codes. However, high-speed list-based decoders with moderate complexity are challenging to implement. Successivecancellation (SC)-flip decoding was shown to be capable of a competitive error-correction performance compared to that of list decoding with a small list size, at a fraction of the complexity, but suffers from a variable execution time and a higher worstcase latency. In this work, we show how to modify the stateof-the-art high-speed SC decoding algorithm to incorporate the SC-flip ideas. The algorithmic improvements are presented as well as average execution-time results tailored to a hardware implementation. The results show that the proposed fast-SSC-flip algorithm has a decoding speed close to an order of magnitude better than the previous works while retaining a comparable error-correction performance.

Polar codes are capacity-achieving error-correcting codes with an explicit construction that can be decoded with low-complexity algorithms. In this work, we show how the state-of-the-art low-complexity decoding algorithm can be improved to better accommodate low-rate codes. More constituent codes are recognized in the updated algorithm and dedicated hardware is added to efficiently decode these new constituent codes. We also alter the polar code construction to further decrease the latency and increase the throughput with little to no noticeable effect on error-correction performance. Rate-flexible decoders for polar codes of length 1024 and 2048 are implemented on FPGA. Over the previous work, they are shown to have from 22% to 28% lower latency and 26% to 34% greater throughput when decoding low-rate codes. On 65 nm ASIC CMOS technology, the proposed decoder for a (1024, 512) polar code is shown to compare favorably against the state-of-the-art ASIC decoders. With a clock frequency of 400 MHz and a supply voltage of 0.8 V, it has a latency of 0.41 $\mu$s and an area efficiency of 1.8 Gbps/mm$^2$ for an energy efficiency of 77 pJ/info. bit. At 600 MHz with a supply of 1 V, the latency is reduced to 0.27 $\mu$s and the area efficiency increased to 2.7 Gbps/mm$^2$ at 115 pJ/info. bit.Comment: 8 pages, 10 figures, submitted to Springer J. Signal Process. Sys

Abstract-In this work, we present a simplified successive cancellation list decoder that uses a Chase-like decoding process to achieve a six time improvement in speed compared to successive cancellation list decoding while maintaining the same errorcorrection performance advantage over standard successivecancellation polar decoders. We discuss the algorithm and detail the data structures and methods used to obtain this speed-up. We also propose an adaptive decoding algorithm that significantly improves the throughput while retaining the error-correction performance. Simulation results over the additive white Gaussian noise channel are provided and show that the proposed system is up to 16 times faster than an LDPC decoder of the same frame size, code rate, and similar error-correction performance, making it more suitable for use as a software decoding solution.

Abstract-Polar codes are a recently proposed class of block codes that provably achieve the capacity of various communication channels. They received a lot of attention as they can do so with low-complexity encoding and decoding algorithms, and they have an explicit construction. Their recent inclusion in a 5G communication standard will only spur more research. However, only a couple of ASICs featuring decoders for polar codes were fabricated, and none of them implements a list-based decoding algorithm. In this paper, we present ASIC measurement results for a fabricated 28 nm CMOS chip that implements two different decoders: the first decoder is tailored toward error-correction performance and flexibility. It supports any code rate as well as three different decoding algorithms: successive cancellation (SC), SC flip and SC list (SCL). The flexible decoder can also decode both non-systematic and systematic polar codes. The second decoder targets speed and energy efficiency. We present measurement results for the first silicon-proven SCL decoder, where its coded throughput is shown to be of 306.8 Mbps with a latency of 3.34 us and an energy per bit of 418.3 pJ/bit at a clock frequency of 721 MHz for a supply of 1.3 V. The energy per bit drops down to 178.1 pJ/bit with a more modest clock frequency of 308 MHz, lower throughput of 130.9 Mbps and a reduced supply voltage of 0.9 V. For the other two operating modes, the energy per bit is shown to be of approximately 95 pJ/bit. The less flexible high-throughput unrolled decoder can achieve a coded throughput of 9.2 Gbps and a latency of 628 ns for a measured energy per bit of 1.15 pJ/bit at 451 MHz.