A theoretical model for predicting and interpreting blood-spatter patterns resulting from a gunshot wound is proposed. The physical process generating a backward spatter of blood is linked to the Rayleigh-Taylor instability of blood accelerated toward the surrounding air, allowing the determination of the initial distribution of drop sizes and velocities. Then the motion of many drops in air is considered with governing equations accounting for gravity and air drag. Based on these equations, a numerical solution is obtained. It predicts the atomization process, the trajectories of the back-spatter drops of blood from the wound to the ground, the impact angle, and the impact Weber number on the ground, as well as the distribution and location of bloodstains and their shape and sizes. A parametric study is undertaken to predict patterns of backward blood spatter under realistic conditions corresponding to the experiments conducted in the present work. The results of the model are compared to the experimental data on back spatter generated by a gunshot impacting a blood-impregnated sponge. A theoretical model for predicting and interpreting blood-spatter patterns resulting from a gunshot wound is proposed. The physical process generating a backward spatter of blood is linked to the Rayleigh-Taylor instability of blood accelerated toward the surrounding air, allowing the determination of the initial distribution of drop sizes and velocities. Then the motion of many drops in air is considered with governing equations accounting for gravity and air drag. Based on these equations, a numerical solution is obtained. It predicts the atomization process, the trajectories of the back-spatter drops of blood from the wound to the ground, the impact angle, and the impact Weber number on the ground, as well as the distribution and location of bloodstains and their shape and sizes. A parametric study is undertaken to predict patterns of backward blood spatter under realistic conditions corresponding to the experiments conducted in the present work. The results of the model are compared to the experimental data on back spatter generated by a gunshot impacting a blood-impregnated sponge.

A theoretical model describing the blood spatter pattern resulting from a blunt bullet gunshot is proposed. The predictions are compared to experimental data acquired in the present work. This hydrodynamic problem belongs to the class of the impact hydrodynamics with the pressure impulse generating the blood flow. At the free surface, the latter is directed outwards and accelerated toward the surrounding air. As a result, the Rayleigh-Taylor instability of the flow of blood occurs, which is responsible for the formation of blood drops of different sizes and initial velocities. Thus, the initial diameter, velocity, and acceleration of the atomized blood drops can be determined. Then, the equations of motion are solved, describing drop trajectories in air accounting for gravity, and air drag. Also considered are the drop-drop interactions through air, which diminish air drag on the subsequent drops. Accordingly, deposition of two-phase (blood-drop and air) jets on a vertical cardstock sheet located between the shooter and the target (and perforated by the bullet) is predicted and compared with experimental data. The experimental data were acquired with a porous polyurethane foam sheet target impregnated with swine blood, and the blood drops were collected on a vertical cardstock sheet which was perforated by the blunt bullet. The highly porous target possesses a low hydraulic resistance and therefore resembles a pool of blood shot by a blunt bullet normally to its free surface. The back spatter pattern was predicted numerically and compared to the experimental data for the number of drops, their area, the total stain area, and the final impact angle as functions of radial location from the bullet hole in the cardstock sheet (the collection screen). Comparisons of the predicted results with the experimental data revealed satisfactory agreement. The predictions also allow one to find the impact Weber number on the collection screen, which is necessary to predict stain shapes and sizes. A theoretical model describing the blood spatter pattern resulting from a blunt bullet gunshot is proposed. The predictions are compared to experimental data acquired in the present work. This hydrodynamic problem belongs to the class of the impact hydrodynamics with the pressure impulse generating the blood flow. At the free surface, the latter is directed outwards and accelerated toward the surrounding air. As a result, the Rayleigh-Taylor instability of the flow of blood occurs, which is responsible for the formation of blood drops of different sizes and initial velocities. Thus, the initial diameter, velocity, and acceleration of the atomized blood drops can be determined. Then, the equations of motion are solved, describing drop trajectories in air accounting for gravity, and air drag. Also considered are the drop-drop interactions through air, which diminish air drag on the subsequent drops. Accordingly, deposition of two-phase (blood-drop and air) jets on a vertical cardstock sheet located between the shooter and the t...

No abstract

No abstract

Trajectory reconstruction in bloodstain pattern analysis is currently performed by assuming that blood drop trajectories are straight along directions provided by stain inspection. Recently, several attempts have been made at reconstructing ballistic trajectories backwards, considering the effects of gravity and drag forces. Here, we propose a method to reconstruct the region of origin of impact blood spatter patterns that considers fluid dynamics and statistical uncertainties. The fluid dynamics relies on defining for each stain a range of physically possible trajectories, based on known physics of how drops deform, both in flight and upon slanted impact. Statistical uncertainties are estimated and propagated along the calculations, and a probabilistic approach is used to determine the region of origin as a volume most compatible with the backward trajectories. A publicly available data set of impact spatter patterns on a vertical wall with various impactor velocities and distances to target is used to test the model and evaluate its robustness, precision, and accuracy. Results show that the proposed method allows reconstruction of bloodletting events with distances between the wall and blood source larger than ~1 m. The uncertainty of the method is determined, and its dependency on the distance between the blood source and the wall is characterized. Causes of error and uncertainty are discussed. The proposed method allows the consideration of stains indicating impact velocities that point downwards, which have typically been excluded from trajectory reconstruction. Based on the proposed method, two practical recommendations on crime scene documentation are drawn.

This is a data set of blood spatter patterns scanned at high resolution, generated in controlled experiments. The spatter patterns were generated with a rifle or a handgun with varying ammunition. The resulting atomized blood droplets travelled opposite to the bullet direction, generating a gunshot backspatter on a poster board target sheet. Fresh blood with anticoagulants was used; its hematocrit and temperature were measured. The main parameters of the study were the bullet shape, size and speed, and the distance between the blood source and target sheet. Several other parameters were explored in a less systematic way. This new and original data set is suitable for training or research purposes in the forensic discipline of bloodstain pattern analysis.

A theoretical model predicting forward blood spatter patterns resulting from a round nose bullet gunshot wound is proposed. The chaotic disintegration of a blood layer located ahead and aside of the bullet is considered in the framework of percolation theory. The size distribution of blood drops is determined, which allows for the prediction of a blood spatter cloud being ejected from the rear side of the target where the bullet exits. Then, droplet trajectories are numerically predicted accounting for gravity and air drag, which is affected by the collective aerodynamic interaction of drops through air. The model predicts the number and area of individual stains, as well as the stain distribution as a function of distance from the region of origin. The theoretical predictions are compared with experimental data acquired in this work from 9 mm Luger copper full metal jacket bullets fired from a handgun. The agreement between the predicted and experimentally measured parameters is found to be good. Disciplines

Self-similar turbulent vortex rings are investigated theoretically in the framework of the semi-empirical turbulence theory for the modified Helmholtz equation. The velocity and vorticity fields are established, as well as the transport of passive admixture by turbulent vortex rings. Turbulent vortex rings of propellant gases originating from the muzzle of a gun after a gunshot are an important phenomenon to consider in crime scene reconstruction. In this work, it is shown that this has a significant repercussion on the outcome of backward blood spatter resulting from a gunshot. Turbulent vortex rings of propellant gases skew the distribution of bloodstains on the ground and can either propel blood droplets further from the target, or even turn them backwards towards the target. This is revealed through the final bloodstain locations and the respective distributions of the number of stains and their area as a function of distance from the target for two different shooter-to-target distances. An image of the propagating muzzle gases after bullet ejection is overlaid with the predicted flow field, which reveals satisfactory agreement. Gunshot residue is an important factor in determining the events of a violent crime due to a gunshot and are considered to be entrained and transported by the propellant gases. The self-similar solutions for the flow, vorticity and concentration of gunpowder particles are predicted and the results are shown to be within the measured range of a limited set of experimental data.