The hydrous ruthenium oxide has been formed by a sol-gel process. The precursor was obtained by mixing aqueous solutions of RuC13 9 xH20 and alkalis. The hydrous ruthenium oxide powder was obtained by annealing the precursor at low temperatures. The crystalline structure and the electrochemical properties of the powder have been studied as a function of the annealing temperature. At lower annealing temperatures the powder is in an amorphous phase with a high specific capacitance. Specific capacitance as high as 720 F/g was measured for the powder formed at 150~ When the annealing temperature exceeded 175~ the crystalline phase was formed, and the specific capacitance dropped rapidly. The surface area of the powder and the resistivity of the pellet made from these powders have also been studied. The specific surface area and the resistivity decreased as the annealing temperature increased. A capacitor was made with electrodes comprised of hydrous ruthenium oxide and HzSO4 electrolyte. The energy density of 96 J/g (or 26.7 Wh/kg), based on electrode material only, was measured for the cell using hydrous ruthenium oxide electrodes. It was also found that hydrous ruthenium oxide is stable in H2SO4 electrolyte.

Articles you may be interested in Tailoring absorption and emission of light in dielectric polymer nanofluids of reinforced poly(vinylidene fluoride) with silver nanoparticles J. Appl. Phys. 107, 034316 (2010); 10.1063/1.3291130 Effect of molecular weight on the dielectric breakdown strength of ferroelectric poly(vinylidene fluoridechlorotrifluoroethylene)s Appl. Phys. Lett. 91, 212904 (2007); 10.1063/1.2816327 Effect of metal-polymer interface on the breakdown electric field of poly(vinylidene fluoridetrifluoroethylene-chlorofluoroethylene) terpolymer Appl. Phys. Lett. 91, 062907 (2007); 10.1063/1.2768205Dielectric relaxation behavior and its relation to microstructure in relaxor ferroelectric polymers: Highenergy electron irradiated poly(vinylidene fluoride-trifluoroethylene) copolymers Using ac and dc methods, we have investigated the dielectric strengths of polyvinylidene fluoride CPVDF)-a ferroelectric/piezoelectric polymer, and some nonferroelectric polymers. The ac to dc ratio of breakdown strengths for PVDF is significantly lower than for other polymers. This observation is discussed in terms of the specific dielectric properties of PVDF, namely, its ferroelectricity and piezoelectricity. 5147

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract