A new personal bioaerosol sampler has recently been developed and evaluated for sampling of viable airborne bacteria and fungi under controlled laboratory conditions and in the field. The operational principle of the device is based on the passage of air through porous medium immersed in liquid. This process leads to the formation of bubbles within the filter as the carrier gas passes through and thus provides effective mechanisms for aerosol removal. As demonstrated in previous studies, the culturability of sampled bacterium and fungi remained high for the entire 8-h sampling period. The present study is the first step of the evaluation of the new sampler for monitoring of viable airborne viruses. It focuses on the investigation of the inactivation rate of viruses in the bubbling process during 4 h of continuous operation. Four microbes were used in this study, influenza, measles, mumps, and vaccinia viruses. It was found that the use of distilled water as the collection fluid was associated with a relatively high decay rate. A significant improvement was achieved by utilizing virus maintenance fluid prepared by using Hank's solution with appropriate additives. The survival rates of the influenza, measles, and mumps viruses were increased by 1.4 log, 0.83 log, and 0.82 log, respectively, after the first hour of operation compared to bubbling through the sterile water. The same trend was observed throughout the entire 4-h experiment. There was no significant difference observed only for the robust vaccinia virus.

No abstract

Recirculated air in HVAC systems used for indoor air quality control in buildings often contains considerable number of viable bioaerosol particles because of limited efficiency of the filters installed in these systems. In the present study, we investigated - using aerosolized bacterial cells, bacterial and fungal spores, and virus-carrying particles - a novel idea of enhancing the performance of a low-efficiency HVAC filter utilizing continuous emission of unipolar ions in the filter vicinity. The findings described in this paper, together with our previously published results for non-biological particles, demonstrate the feasibility of the newly developed approach.

No abstract

While various sampling methods exist for collecting and enumerating airborne bacteria and fungi, no credible methodology has yet been developed for airborne viruses. A new sampling method for monitoring the personal exposure to bioaerosol particles has recently been developed and evaluated with bacteria and fungi. In this method, bacterial/fungal aerosol is aspirated and transported through a porous medium, which is submerged into a liquid layer. As the air is split into numerous bubbles, the particles are scavenged by these bubbles and effectively removed. The current feasibility study was initiated to evaluate the efficiency of the new personal sampler prototype ("bubbler") with airborne viable viruses. Two common viral strains, Influenza (stress-sensitive) and Vaccinia (robust), were aerosolized in the test chamber and collected by two identical "bubblers" that operated simultaneously for a duration of upto 5 min. A virus maintenance liquid, proven to be the optimum collecting environment for the test organisms, was used as a collection fluid. After sampling, the collecting fluid was analyzed and the viral recovery rate was determined. The overall recovery (affected not only by the sampling but also by the aerosolization and the aerosol transport) was 20% for Influenza virus and 89% for Vaccinia virus. The new sampling method was found feasible for the collection and enumeration of robust airborne viruses. ᭧