A new personal bioaerosol sampler has recently been developed and evaluated for sampling of viable airborne bacteria and fungi under controlled laboratory conditions and in the field. The operational principle of the device is based on the passage of air through porous medium immersed in liquid. This process leads to the formation of bubbles within the filter as the carrier gas passes through and thus provides effective mechanisms for aerosol removal. As demonstrated in previous studies, the culturability of sampled bacterium and fungi remained high for the entire 8-h sampling period. The present study is the first step of the evaluation of the new sampler for monitoring of viable airborne viruses. It focuses on the investigation of the inactivation rate of viruses in the bubbling process during 4 h of continuous operation. Four microbes were used in this study, influenza, measles, mumps, and vaccinia viruses. It was found that the use of distilled water as the collection fluid was associated with a relatively high decay rate. A significant improvement was achieved by utilizing virus maintenance fluid prepared by using Hank's solution with appropriate additives. The survival rates of the influenza, measles, and mumps viruses were increased by 1.4 log, 0.83 log, and 0.82 log, respectively, after the first hour of operation compared to bubbling through the sterile water. The same trend was observed throughout the entire 4-h experiment. There was no significant difference observed only for the robust vaccinia virus.

While various sampling methods exist for collecting and enumerating airborne bacteria and fungi, no credible methodology has yet been developed for airborne viruses. A new sampling method for monitoring the personal exposure to bioaerosol particles has recently been developed and evaluated with bacteria and fungi. In this method, bacterial/fungal aerosol is aspirated and transported through a porous medium, which is submerged into a liquid layer. As the air is split into numerous bubbles, the particles are scavenged by these bubbles and effectively removed. The current feasibility study was initiated to evaluate the efficiency of the new personal sampler prototype ("bubbler") with airborne viable viruses. Two common viral strains, Influenza (stress-sensitive) and Vaccinia (robust), were aerosolized in the test chamber and collected by two identical "bubblers" that operated simultaneously for a duration of upto 5 min. A virus maintenance liquid, proven to be the optimum collecting environment for the test organisms, was used as a collection fluid. After sampling, the collecting fluid was analyzed and the viral recovery rate was determined. The overall recovery (affected not only by the sampling but also by the aerosolization and the aerosol transport) was 20% for Influenza virus and 89% for Vaccinia virus. The new sampling method was found feasible for the collection and enumeration of robust airborne viruses. ᭧

No abstract

Due to recent SARS related issues (Science 300 (5624) 1394; Nature 423 (2003) 240; Science 300 (5627) 1966), the development of reliable airborne virus monitoring procedures has become galvanized by an exceptional sense of urgency and is presently in a high was previously applied to the removal of particles from gas carriers, a new personal bioaerosol sampler has been developed. Contaminated air is bubbled through porous medium submerged into liquid and subsequently split into multitude of very small bubbles. The particulates are scavenged by these bubbles, and, thus, effectively removed. The current study explores its feasibility for monitoring of viable airborne SARS virus. It was found that the natural decay of such virus in the collection fluid was around 0.75 and 1.76 lg during 2 and 4 h of continuous operation, respectively. Theoretical microbial recovery rates of higher than 55 and 19% were calculated for 1 and 2 h of operation, respectively. Thus, the new sampling method of direct non-violent collection of viable airborne SARS virus into the appropriate liquid environment was found suitable for monitoring of such stress sensitive virus. r

A new personal bioaerosol sampler has recently been developed and verified to be very efficient for monitoring of viable airborne bacteria, fungi and viruses. The device is capable of providing high recovery rates even for microorganisms which are rather sensitive to physical and biological stresses. However, some mathematical procedure is required for realistic calculation of an actual concentration of viable bioaerosols in the air taking into account a rate of inactivation of targeted microorganisms, sampling parameters, and results of microbial analysis of collecting liquid from the sampler. In this paper, we develop such procedure along with the model of aerosol propagation for outdoor conditions. Combining these procedures allows one to determine the optimal sampling locations for the best possible coverage of the area to be monitored. A hypothetical episode concerned with terrorists' attack during music concert in the central square of Novosibirsk, Russia was considered to evaluate possible coverage of the area by sampling equipment to detect bioaerosols at various locations within the square. It was found that, for chosen bioaerosol generation parameters and weather conditions, the new personal sampler would be capable to reliably detect pathogens at all locations occupied by crowd, even at distances of up to 600 m from the source. r