Numerous situations in daily life necessitate a decision. Several of them entail selecting the best option from a number of available options. In many such cases, no single solution is optimal for all of the performance characteristics. This study proposes using grey relational analysis (GRA), a multiple criteria decision making (MCDM) method, to solve this problem. Material selection is vital in designing and developing products, especially for composites materials requiring special attention. The substitution of conventional materials with natural fibres as base material is commonly practised due to high material consumption in mass-producing plastic components that could harm the environment. Therefore, in this work, natural fibres were chosen as composite reinforcement in the design of cyclist helmets. This approach was used to evaluate the right natural fibre and is able to fulfill the needs of consumers and the environment. From the results, the GRA method was utilised and revealed that pineapple was the best top ranking natural fibre with a grade of 0.5687, followed closely by bamboo with a grade of 0.5678, and abaca with a grade of 0.4966. Error analysis was performed to increase the confidence level of the results obtained.
Global pollution due to the overwhelming usage of non-biodegradable plastics is getting severe nowadays. Hence, the aim of this paper is to develop an environmentally friendly composite material from potato starch and sugarcane bagasse. The composites were prepared by hot pressing at 145? for 60 min. The composites were characterize for their mechanical and thermal properties. In terms of thermal properties, thermogravimetric analysis shows that incorporation of sugarcane fiber has improved the thermal stability of the composites. Meanwhile, incorporation of sugarcane fibre form 0 to 15 wt.% has significantly improved the tensile and flexural properties of the composites. Scanning electron micrograph of the tensile fracture showed the fibre fracture and fibre “pull-out” from the composite. Overall, the biodegradable composites has shown improved functional characteristic than the origin material. This finding shows that this Sugarcane/Potato starch composites are potential alternative material for biodegradable product i. e biodegradable plastic packaging.
Geopolymer coating using rice husk ash (RHA) as the aluminosilicate source has shown excellent fire retardant properties. However, incorporation of rice husk ash into the geopolymer matrix increased water absorption properties of the polymer composite. As such, silicone rubber (SiR) was introduced to improve the moisture absorption and fire retardant properties of the composite. Additionally, the less efficient one-factor-at-a-time (OFAT) approach was conventionally used in past studies on the RHA-based geopolymer composite. In understanding the optimum value and significant effect of factors on the fire retardant and moisture absorption properties of the binary blended geopolymer coating composite, the use of statistical analysis and regression coefficient model (mathematical model) was considered essential. The objectives of this study are to identify the significant effect of factors on moisture absorption and fire retardant properties, to determine the optimum composition, and to study the microstructure of the rice husk ash/silicone rubber (RHA/SiR)-based binary blended geopolymer coating composite. The RHA/AA and SiR/Ge ratios were chosen as factors, and the response surface methodology (RSM) was employed to design experiments and conduct analyses. Fire retardant and moisture absorption tests were conducted. A scanning electron microscope (SEM) was used to observe the microstructure of geopolymer samples. The RHA/alkaline activator (AA) and SiR/Ge ratios were shown to have a significant effect on the responses (temperature at equilibrium and moisture absorption). The high ratio of RHA/AA and SiR/Ge resulted in a lower temperature at equilibrium (TAE) below 200°C and at moisture absorption below 16%. The optimum formulation for the geopolymer coating composite can be achieved when the RHA/AA ratio, SiR/Ge ratio, and sodium hydroxide concentration are set at 0.85, 0.70, and 14 M, respectively. SEM micrographs of samples with good fire retardant properties showed that the char residue of the geopolymer composite coating, which is a layer of excess silicone rubber, is porous and continuous, thus providing a shielding effect for the layer of geopolymer underneath. The sample with good moisture absorption showed the formation of a thin outer layer of silicone rubber without any cracks. The unreacted SiR formed a thin layer beneath the geopolymer composite matrix providing a good moisture barrier.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.