Wood is a renewable material widely used in the construction industry. However, it is susceptible to fungal degradation. Several chemical products have been developed to improve its durability, but the toxicity of some of these products limits their use. One alternative to chemical treatment is thermal modification of wood. This method improves the dimensional stability of wood and reduces its susceptibility to decay. The impact of different parameters (maximum temperature, heating rate, holding time, and gas moisture content) of thermal modification on the mechanical properties of Betula papyrifera was studied in a prototype furnace. The results show a marked decrease in the modulus of rupture with increasing temperature while the modulus of elasticity does not seem to be affected. The hardness increases with maximum modification temperature, and in the absence of moisture in gas, and there is an improvement of the dimensional stability after thermal modification.

No abstract

No abstract

Large numbers of carbon anodes are used in aluminum industry. The manufacture of carbon anodes involves the preparation of a paste (a mixture of coke, pitch, and recycled material), the production of green anodes via mixing and compaction of this paste, followed by cooling and baking of the green anodes. Anode baking is carried out in large furnaces. Any modification to design or operation would require a careful study of its impact on anode quality. In recent years, mathematical models have been used effectively to complement the experimental work in order to improve furnace operation and design. A design model and a process model are being developed to study the behavior of a horizontal anode baking furnace and to determine the necessary improvements. In this article, these models and their use for the study of a furnace will be described, and the results of the numerical simulations will be presented.

No abstract

No abstract

No abstract

No abstract