This letter presents the fabrication and the modeling of a continuously tuned microfluidic capacitor. On one hand its electrodes are realized by classical electrodeposition techniques and on the other hand, the lamination of SU-8 films allows superposing some microfluidic channels. According to the experimental results, the capacitor value increases continuously following the deionized (DI) water penetration in microchannels. The capacitance variations are comprised between Cmin = 0.52 pF and Cmax = 18.5 pF, allowing a wide tuning range that reaches 3460% at 500 MHz. The quality factor decreases from Qmax = 69 when the capacitor is empty to Qmin = 5.3 when it is fully filled with DI water. We have also investigated the theoretical aspects of our device by modeling the electric field and the current distributions inside the channels: when they are entirely filled with the DI water, the electric field is cancelled.
This paper presents the design and the fabrication of a continuously tunable RF MEMS capacitor using micro fluidics as a tuning parameter. The impedance variation principle is based on the modification of the capacitor gap permittivity produced by the presence of deionized water and its displacements in a channel inserted between electrodes. In addition, the electric field distribution changes in equiponderant way according to the DI water positions in the channel. This change modifies the capacitive coupling, the stored energy and consequently the self-resonant frequency. The fabrication process is based on two parts: metallic paths having a spiral form, and obtained by electroplating a 7 µm thick gold layer to constitute electrodes; and fluidic channels, realized by super imposing two SU-8 films. The measurements show a non-linear variation of the capacitor value according to the water positions. The tuning range is very large, reaching up to 4650% for the capacitance, and 335% for the resonant frequency. However, the quality factor reaches Qmax = 79 at 550 MHz if the capacitor is empty and decreases with the fluid displacements to Qmin = 3.13.
The effect of a dielectric liquid on the tunability of capacitor operating in RF domains is evaluated. The RF measurement shows a high variation of the resonant frequency accompanied with a low insertion loss. Moreover, the fluid positions between electrodes modify the capacitance value up to Tr = 6660% at 600 MHz. The quality factor decreases in response of water filling from Q max = 51.9 when it is empty to Q min = 1.49 when it is fully filled. According to the finite-element method analysis, the change of the dielectric permittivity influences the capacitor performances. Essentially, the tuning range of the capacitance and the quality factor could reach, respectively: Tr = 7660% and Q min = 35.
This paper discusses the behavior of RF MEMS tunable microwave filter. We have modeled the distribution of magnetic field and electric current density in order to reveal the comportment of each device and to evaluate the relation between the frequency response and the microwave performances. From several modelling and simulations, we catch the resonance phenomenon for magnetic and electric fields at different conditions. Hence, in order to develop a reconfigurable MEMS ensuring a function of tunable band-pass filters, we have identified conditions allowing to vary the resonance frequency from Fres = 0.42 GHz to Fres = 1.85 GHz ensuring a large total variation of Tr = 340.5%. The structure is fabricated using SU-8 resin for circulating microchannels and sealing layers. The extracted parameters from measurements results and retro-simulation reveal a diminution of the total tuning range.
A planar miniaturized inductor has been designed in order to realize some transduction functions linked to the presence of fluids. Its electrical behavior has been studied for two liquids: Galinstan (an alloy of GALium INdium STANum) and salted water. Their presence between metallic armatures modifies the inductance value at a nominal frequency, chosen at 2GHz. By using a FEM software, the spatial distributions of magnetic field and surface current density in the entire device have been modelized for six arbitrary positions of these liquids in inductor microchannels. The geometrical aspects of the device have been studied and their influence examined for each liquid. We show that the inductor performances are influenced by the spiral width variations and the inter-turn distances of the coil. Considering the device as a sensor, we have evaluated the variations of two parameters: inductance and quality factors, which can respectively attain 664% (for Galinstan) and 175% (for salted water) from their nominal values.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.