No abstract

The reduction of CO2 into useful hydrocarbon chemicals has attracted significant attention in light of the depletion in fossil resources and the global demand for sustainable sources of energy. In...

In this work, a series of 10 wt% NiO/CeO2 catalysts (Ni/Ce) promoted by V2O5 with content varying in the range of 0–0.5 wt% was prepared by the co-impregnation method. The characteristics of the catalysts were investigated by several techniques including N2 physisorption (BET), X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), EDS mapping, carbon dioxide temperature-programmed desorption (CO2-TPD), and hydrogen temperature-programmed reduction (H2-TPR). The activity of the catalyst was studied in the micro-flow system in a temperature range of 550 °C–800 °C, the feedstock composition CH4/CO2/H2O of 3.0/1.2/2.4 and the weight hourly space velocity (WHSV) of 30,000 ml.h−1.g−1. Adding V2O5 additive, on the one hand increases the reducibility and basicity of Ni/Ce catalyst, on the other hand reduces oxygen vacancies and increases the crystal size of CeO2, leading to various effects on catalyst activity depending on its content. Ni/Ce catalyst promoted with 0.3 wt% of V2O5 was the best among tested ones, on which at reaction temperature of 700 °C, the conversion of CH4 and CO2 reached 97% and 77% respectively, and the molar ratio of H2/CO was 2.1. Meanwhile, on non-promoted Ni/Ce catalyst, the corresponding quantities were 83%, 62% and 1.9, respectively. It is important to note that performance of both was stable for more than 30 h thanks to the better resistance to coke deposition and structural stability.

To date, a number of studies have reported the use of vibrations coupled to ferroelectric materials for water splitting. However, producing a stable particle suspension for high efficiency and long-term stability remains a challenge. Here, the first report of the production of a nanofluidic BaTiO 3 suspension containing a mixture of cubic and tetragonal phases that splits water under ultrasound is provided. The BaTiO 3 particle size reduces from approximately 400 nm to approximately 150 nm during the application of ultrasound and the fine-scale nature of the particulates leads to the formation of a stable nanofluid consisting of BaTiO 3 particles suspended as a nanofluid. Long-term testing demonstrates repeatable H 2 evolution over 4 days with a continuous 24 h period of stable catalysis. A maximum rate of H 2 evolution is found to be 270 mmol h -1 g -1 for a loading of 5 mg l -1 of BaTiO 3 in 10% MeOH/H 2 O. This work indicates the potential of harnessing vibrations for water splitting in functional materials and is the first demonstration of exploiting a ferroelectric nanofluid for stable water splitting, which leads to the highest efficiency of piezoelectrically driven water splitting reported to date.

No abstract

No abstract

Metastable MoO 3 was successfully synthesized by a chemical transformation of a-MoO 3 and characterized by TG-DSC, BET, XRD and Raman spectroscopy. The prepared material was highly active and selective to formaldehyde formation from methanol over a wide range of reaction temperatures. The formaldehyde selectivity can reach up to 99 % at about 98 % methanol conversion. The stability of the prepared catalysts was also investigated.

No abstract