Several studies have been carried out to understand bulking phenomena and the importance of environmental factors on sludge settling characteristics. The main objective of this study was to carry out functional characterization of microbial community structure of wastewater electro-bioreactor sludge as it undergoes serial passaging in the presence or absence of a current density over 15 days. Illumina MiSeq sequencing and QIIME were used to assess sludge microbial community shifts over time. (α) and (β) diversity analysis were conducted to assess the microbial diversity in electro-bioreactors. A phylogeny-based weighted UniFrac distance analysis was used to compare between bacterial communities while BIO-ENV trend and Spearman’s rank correlation analysis were performed to investigate how reactor operational parameters correlated with bacterial community diversity. Results showed that the removal efficiency of soluble chemical oxygen demand (sCOD) ranged from 91–97%, while phosphorous (PO43−-P) removal was approximately 99%. Phylogenetic analysis revealed stark differences in the development of sludge microbial communities in the control and treatment reactor. There was no mention of any studies aimed at characterizing functional microbial communities under electric field and the results communicated here are the first, to our knowledge, that address this gap in the literature.

Lyophilization is the “gold standard” for drying plant extracts, which is important in preserving their quality and extending their shelf-life. Compared to other methods of drying plant extracts, lyophilization is costlier due to equipment, material and operational expenses. An alternative method is post-extraction oven-drying, but the effects of this process on extract quality are unknown. In this study, crude extracts from Arthrocnemum macrostachyum shoots were compared using three post-extraction drying methods (lyophilization and oven drying at 40 and 60 °C) and two extraction solvents (water and aqueous 50% ethanol). Untargeted metabolomics coupled with chemometrics analysis revealed that post extraction oven-drying resulted in the loss of up to 27% of molecular features when compared to lyophilization in water extracts only. In contrast, only 3% of molecular features were lost in aqueous 50% ethanol extracts when subjected to oven drying. That is to say, ethanol used as a solvent has a stabilizing effect on metabolites and enhances their resistance to thermal transformation in the oven. Collectively, oven-drying of extracts was as effective as lyophilization in preserving metabolites in extracts only when 50% ethanol was used as a solvent. The results presented in this paper demonstrate the value of selecting solvent-appropriate post-extraction drying methods.

No abstract

The impact of hydraulic retention time (HRT) on the performance and microbial community structure of control and electro‐bioreactors was investigated. Control bioreactors and electro‐bioreactors were operated at HRT ranging between 6 and 75 hr. The total bacterial counts in addition to the removal efficiency of NH 4 +–N, sCOD, and PO 4 3−–P was assessed in all the reactors tested. In addition, Illumina sequencing was performed to determine the microbial communities that developed in these reactors under each HRT condition. Phylogenetic analysis showed that Proteobacteria and Bacteroidetes were the dominant phyla in those reactors. In addition, Nitrospira sp. and Pseudomonas sp. were found to be present in electro‐bioreactors with higher relative abundance than in control bioreactors. The results presented here are the first to determine what different microbial communities in wastewater electro‐bioreactors due to the application of an electric current under different HRTs.