Poly(vinyl chloride) (PVC) undergoes photodegradation induced by ultraviolet (UV) irradiation; therefore, for outdoor applications, its photostability should be enhanced through the use of additives. Several carvedilol tin complexes were synthesized, characterized and mixed with PVC to produce thin films. These films were irradiated at 25 °C with a UV light (λ = 313 nm) for up to 300 h. The reduction in weight and changes in chemical structure and surface morphology of the PVC films were monitored. The films containing synthesized complexes showed less undesirable changes than the pure PVC film. Organotin with a high content of aromatics was particularly efficient in inhibiting photodegradation of PVC. The carvedilol tin complexes both absorbed UV light and scavenged radicals, hydrochloride, and peroxides and, therefore, photostabilized PVC.

Poly(vinyl chloride) (PVC) is an important synthetic plastic that is produced in large quantities (millions of tons) annually. Additives to PVC are necessary to allow its use in many applications, particularly in harsh conditions. In regard to this, investigation of the synthesis of trimethoprim–tin complexes and their use as PVC additives is reported. Trimethoprim–tin complexes were obtained from the reaction of trimethoprim and tin chlorides using simple procedures. Trimethoprim–tin complexes (0.5% by weight) were added to PVC to produce homogenous mixtures and thin films were made. The effect of ultraviolet irradiation on the surface and properties of the PVC films was investigated. The level of both photodecomposition and photo-oxidation of PVC films containing trimethoprim–tin complexes was observed to be lower than for the blank film. The effectiveness of tin complexes as PVC photostabilizers reflects the aromaticity of the additives. The complex containing three phenyl groups attached to the tin cation showed the most stabilizing effect on PVC. The complex containing two phenyl groups was next, with the one containing butyl substituents resulting in the least stabilization of PVC. A number of mechanisms have been proposed to explain the role of the synthesized complexes in PVC photostabilization.

No abstract

The formation of host–guest complexes of cucurbit[7]uril (CB7) with the antihistamine drug tripelennamine (TRP) was studied by optical and NMR spectroscopy. The experimental and computational results are consistent with inclusion of a single TRP molecule in CB7. Addition of CB7 has tuned drug protonation states associated with (de)protonation of the ethyldimethylammonium and exocyclic nitrogens with an increase in the associated pKa values by 1.5 and 2.5 units, respectively. The incorporation of antihistamines drugs such as TRP in cucurbiturils could be utilized for switching their capability for selective binding to histamine H1‐receptors, in the future. Copyright © 2015 John Wiley & Sons, Ltd.

No abstract

The lifetime of poly(vinyl chloride) (PVC) can be increased through the addition of additives to provide protection against irradiation. Therefore, several new tin complexes containing atenolol moieties were synthesized and their photostabilizing effect on PVC was investigated. Reacting atenolol with a number of tin reagents in boiling methanol provided high yields of tin complexes. PVC was then mixed with the tin complexes at a low concentration, producing polymeric thins films. The films were irradiated with ultraviolet light and the resulting damage was assessed using different analytical and surface morphology techniques. Infrared spectroscopy and weight loss determination indicated that the films incorporating tin complexes incurred less damage and less surface changes compared to the blank film. In particular, the triphenyltin complex was very effective in enhancing the photostability of PVC, and this is due to its high aromaticity (three phenyl rings) compared to other complexes. Such an additive acts as a hydrogen chloride scavenger, radical absorber, and hydroperoxide decomposer.

Modification of poly(vinyl chloride) surface was achieved via introducing a new Schiff base containing 1,2,4‐triazole ring system to the polymer backbone. The new Schiff base containing 1,2,4‐triazole ring and the resulted homogenous polymer (PVC‐L) was characterized using Fourier‐transform infrared spectroscopy. Copper chloride was then added to coordinate with homogenous polymer to form PVC‐L‐CuII. The UV stability of the modified polymer was tested under long periods (300 h) of UV‐irradiation. The morphology of the modified surface was investigated by scanning electron microscopy. J. VINYL ADDIT. TECHNOL., 26:475–480, 2020. © 2020 Society of Plastics Engineers

Cis- or Z-configuration is required for the plant growth-promoting activity of cinnamic acid (CA), whereas the E-form is inactive. Herein, we describe the encapsulation of E-CA by cucurbit[7]uril (CB7) and show that photoisomerization reactions can be more efficiently controlled in aqueous solutions by utilizing this supramolecular approach. Measurements of UV–visible absorption and proton NMR spectra at different pH values confirm that E-CA and its methyl ester, methyl-E-cinnamate (MC), form stronger 1:1 host–guest complexes with CB7 compared to cucurbit[8]uril (CB8) or three cyclodextrins (α-, β-, and γ-CD). Irradiation of (300 nm) UV light to an aqueous solution of the CB7-bound E isomers induces E to Z photoisomerization and the dissociation of the complex. When the same solution is irradiated by (254 nm) UV light, Z to E conformational changes of the unbound Z isomers are observed and are accompanied by restoring the host–guest complex formation.