Renewable energy power generation is a concept of generating electrical energy that is widely applied today. The rapid population growth is proportional to the high demand for electrical energy. There are still a lot of power plants that rely on fossil fuels as a source of energy to drive the turbines. The limitations of fossil energy provide an alternative thought for using renewable energy as electricity generation. Bangka Island is an island with great potential for solar and wind energy. The two energy sources are expected to provide a solution to the scarcity of energy that occurs on the island of Bangka. This research is expected to provide input in solving the problem of the high demand for electrical energy on the island of Bangka and provide an idea that renewable energy is a substitute for limited fossil energy. From each renewable energy generator, research is carried out to obtain the electrical energy produced. The electrical energy data generated by the two power plants will be compared in order to obtain effectiveness and efficiency values. The research was conducted in Bangka district using 50 Wp solar panels and 30 Watt DC generators.
Natural polymers such as chitosan are one of the interesting things to study or are widely used as industrial raw materials such as adsorbents, membranes, and edible films. Portunus pelagicus L. is one of the sources of chitosan from nature. The shell of Portunus pelagicus L. in Bangka Island are waste from the untapped food industry. Even though this shell can have high values because there are chitin and chitosan. Good chitosan has a high degree of deacetylation. So the research purpose of this study is to see the effect deacetylation process using a microwave. The microwave used was MARS 6 - Microwave Accelerated Reaction System (CEM) using an EasyPrep Plus vessel. Various in Microwave deacetylation process is the time at 1200 W and 100°C. The method for analyzing the structure and degree of deacetylation (DD) in this study uses Fourier Transform Infrared (FTIR) spectroscopy. The results showed that deacetylation using conventional methods for 120 minutes at a temperature 100°C had DD 76.67% while deacetylation using microwave for 40 minutes at a temperature of 100°C had a DD 77.89%. Microwave deacetylation is three times faster than conventional methods.
The rapid economic and population growth triggers a high demand for energy in Indonesia. This condition urges us to innovate in renewable energy which sustainable and environmentally friendly. One promising renewable energy is the tidal current energy which very potential in the island regions, such as Bangka Belitung Province. Kelabat Bay, which located in northern part of Bangka Island is a semi-closed waters and has a shallow and narrow gap in its center which separate Teluk Kelabat Luar (TKL) and Teluk Kelabat Dalam (TKD) region, which become the focus region in this research. This geographical condition allows potential energy amplification when the tides occur. Thus, this research aims to assess the potential energy of tidal currents as renewable energy in Kelabat Bay, especially at its narrow gap. The method used in this study was the numerical modelling using MIKE21 software and direct measurement to obtain tides and currents both in toward high tide and low tide condition. The current profile in Kelabat Bay is very influenced by the tidal which flow from TKL to TKD when toward high tide and vice versa toward low tide. The highest speed is measured at 15 meter depth on point 1 with speed up to 1.43 m/s. By this speed, it could be estimated 1494 watt of tidal current energy will be generated. This huge energy potential of tidal current at Kelabat Bay could be exploited to produce electricity in future works.
Sistem pengukuran dan pemantauan energi listrik yang dilakukan secara langsung memiliki berbagai kekurangan, diantaranya tidak dapat diakses secara real time. Oleh karenanya, pada penelitian ini dirancang alat ukur sistem pemantauan pada panel yang diimplementasikan di Gedung Dharma Penelitian Universitas Bangka Belitung menggunakan aplikasi Blynk pada smartphone berbasis mikrokontroler. Dalam penelitian ini juga akan dibandingkan hasil pengukuran dengan alat ukur clamp meter. Dari hasil penelitian, selisih nilai yang terbaca oleh sensor PZEM-004T terhadap alat ukur clamp meter yakni 1,37 V untuk fasa R, 0,8 V untuk fasa S dan 1,4 V untuk fasa T. Untuk selisih nilai arus yakni 0,03 A untuk fasa R, 0,04 A untuk fasa S dan 0,03 A untuk fasa T. Sedangkan untuk daya 7,88 W untuk fasa R, 0,90 W untuk fasa S dan 0,98 W untuk fasa T
PT. Indonesia Comnets Plus KP Bangka Belitung merupakan provider telekomunikasi yang menyediakan layanan jaringan internet berbasis fiber optic (FO). Selama 3 tahun beroperasi sejak tahun 2019 sampai 2022, diperkirakan permasalahan yang ada berupa kurangnya penyediaan informasi mengenai titik-titik lokasi persebaran FAT (Fiber Access Terminal) PT. Indonesia Comnets Plus di wilayah Bangka Belitung (Rinto Hariwijaya, 2022). Penyediaan informasi mengenai titik-titik persebaran FAT (Fiber Access Termnial) ini masih menggunakan sistem manual dimana admin perlu membagikan titik-titik lokasi dari FAT (Fiber Access Terminal) melalui messenger. Dengan adanya peningkatan jumlah pengguna FAT setiap tahun pada PT. Indonesia Comnets Plus KP Bangka Belitung maka dibutuhkan sistem informasi berbasis web yang mempersingkat waktu dalam menampilkan informasi lokasi titik-titik FAT (Fiber Access Terminal) guna mempermudah pengguna FAT dalam memperoleh informasi lokasi FAT. Tujuan dari penelitian ini adalah untuk merancang dan membangun web yang dapat memberikan informasi geografis tentang titik-titik lokasi persebaran FAT (Fiber Access Terminal) di wilayah Provinsi Kepulauan Bangka Belitung. Hasil analisis sistem diperoleh setelah melakukan implementasi web selama 10 hari dimana menunjukkan nilai kuisioner sebesar 56,3% penilaian baik.
The Synthesis of chitosan - LiCLO4 solid electrolyte membrane has been carried out. The membrane is prepared by using a casting method. Chitosan 0.6 gram, LiClO4 (Sigma-Aldrich > 95%) with variations of 10% and 40% (w / w) and 10% PVA (w / w) put into the measuring cup. Furthermore, the mixture was dissolved in a 2% acetic acid solution of 30 mL (v / v) and stirred evenly at room temperature. The solution is then put into an acrylic casting plate measuring 30x5 cm and allowed to stand dry. The electrolyte membrane was then analyzed for functional groups using FTIR and conductivity using the HICRI 3532-50 Hi-Tester LCR. The FTIR results stated that the addition of lithium caused a shift in the wave number 2871 to 2920 cm-1 which showed the presence of the OCH3 group, while the highest conductivity value was 3.98 x 10-7 - 3.16 x 10-6 at a frequency of 42 Hz - 5MHz. These results provide information that the synthesized membrane can be applied as an electrolyte membrane on the batteries.
Pemanfaatan energi listrik dari panel surya terkadang tidak terpantau dengan baik, khususnya lampu taman tenaga surya di universitas bangka belitung yang dimana kondisi keseluruhan lampu taman tenaga surya tersebut rusak. . Oleh karena itu penelitian ini dilakukan agar dapat mengetahui kerusakan yang sering terjadi pada lampu taman dan cara memperbaiki lampu taman tersebut agar berfungsi normal kembali. Dari kerusakan lampu taman tersebut di bagi menjadi 3 kategori kerusakan, yaitu rusak ringan, rusak sedang, dan rusak berat. Setelah mengetahui dari 3 kategori kerusakan tersebut di buat la anggaran biaya secara keseluruan total komponen barang yang rusak, setelah mengetahui anggaran biaya dilanjutkan mengukur nilai efisiensi pada panel surya bersih dan kotor tanpa menggunakan solar charger controller dan menggunakan solar charger controller. Efisiensi panel surya bersih tanpa solar charger controller 5,4% dan lux 21%, kotor 4,5% dan lux 20% . Efisiensi panel surya bersih menggunakan solar charger controller 4,4% dan lux 22%, kotor 3,8% dan lux 21% Kata kunci : efisiensi, solar charger controller, lux
Penelitian yang telah dilakukan ini bertujuan untuk mendukung sistem yang mampu mengidentifikasi isyarat murmur jantung yang banyak terjadi di Indonesia. Metode yang digunakan untuk mengklasifikasi isyarat ini adalah dengan sistem Jaringan Syaraf Tiruan (JST) yang diawali dengan analisis FFT yang merupakan suatu pendekatan dalam pengenalan nama-nama pola murmur jantung: stenosis katup aorta,defect septum atrium, regurgitation mitral, defect septum ventricle, click-mid systolic, regurgitation stenosis aorta, presistolic, stenosis mitral, dan ductus arteriosus. Dengan pembobotan vektor pada JST sebagai pola-pola masukan yang mirip dengan pola-pola yang telah diberikan pada saat pelatihan. Selanjutnya jaringan diuji untuk satu pola masukan tertentu dan jaringan akan memberikan vektor keluaran sebagai hasil klasifikasi.Ujicoba identifikasi isyarat murmur jantung yang telah dilakukan memberikan keberhasilan mencapai 78,5%. Program ditulis dengan menggunakan perangkat-lunak MATLAB.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.