Glazing employing electrochromic materials can change their optical characteristics of transparency and absorption of solar radiation according to users' needs by simultaneously reducing visible light and NIR transmission through the window. However, spectral selectivity has been becoming a key requirement in smart dynamic windows as it permits maximizing both visual and thermal comfort while minimizing energy consumption for heating, cooling, and lighting. Herein, a dual band electrochromic system is presented, which consists of an engineered nanocomposite electrode capable of advantageously combining the broad band plasmonic response of nanocrystalline indium-tin-oxide with high optical contrast of polyaniline. Their synergistical spectroelectrochemical features make possible the implementation of a four-state tunable electrochromic system (here referred to as "plasmochromic"), which permits selectively regulating optical transmittance in the visible and near-infrared range and exhibits excellent spectral selectivity (the ratio between visible light transmittance (T LUM ) and solar transmittance (T SOL ) can be tuned from 0.67 to 1.61) across a potentials window of only 1.2 V.
Structural and optical characterization of copper phthalocyanine thin film thermally deposited at different substrate temperatures was the aim of this work. The morphology of the films shows strong dependence on temperature, as can be observed by atomic force microscopy and x-ray diffraction spectroscopy, specifically in the grain size and features of the grains. The increase in the crystal phase with substrate temperature is shown by x-ray diffractometry. Optical absorption coefficient measured by photothermal deflection spectroscopy and optical transmittance reveal a weak dependence on the substrate temperature. Besides, the electro-optical response measured by the external quantum efficiency of Schottky ITO/CuPc/Al diodes shows an optimized response for samples deposited at a substrate temperature of 60ºC, in correspondence to the I -V diode characteristics.
This paper deals with the design, operation, modeling, and grid integration of bioelectrochemical systems (BES) for power-to-gas application, through an electromethanogenesis process. The paper objective is to show that BES-based power-to-gas energy storage is feasible on a large scale, showing a first approximation that goes from the BES design and operation to the electrical grid integration. It is the first study attempting to cover all aspects of a BES-based power-to-gas technology, on authors’ knowledge. Designed BES reactors were based on a modular architecture, suitable for a future scaling-up. They were operated in steady state for eight months, and continuously monitored in terms of power consumption, water treatment, and biomethane production, in order to obtain data for the following modeling activity. A black box linear model of the BES was computed by using least-square methods, and validated through comparison with collected experimental data. Afterwards, a BES stack was simulated through several series and parallel connections of reactors, in order to obtain higher power consumption and test the grid integration of a real application system. The renewable energy surplus and energy price variability were evaluated for the grid integration of the BES stack. The BES stack was then simulated as energy storage system during low energy price periods, and tested experimentally with a real time system.
In dye-sensitised solar cells developed to-date, ultraviolet blocking layers (UV-BL) is employed to avoid photocatalysis effects on the dye and consequent reduction in PV energy output over time due to UV exposure in outdoor conditions. Use of a UV-BL increases stability but, power conversion efficiency decreases as incident UV photons are not converted. The organolanthanide complex Eu(tta) 3 phen is examined for inclusion in large Stokes shift downshifting (LSS DS) layers. It is shown that such LSS DS layers can be used as a UV blocking layer in DSSCs. A ray-trace numerical model is used to optimise the thickness and concentration of the LSS DS layers for the specific N719 DSSC. EQE is significantly increased in the UV spectral region compared to DSSCs utilizing a passive, non-luminescent, UV-BL. High Eu(tta) 3 phen film transparency in the visible range minimises DSSC EQE losses at visible wavelengths. The photostability of the blended LSS DS polymer films is not sufficient to be useful for medium-long term outdoor PV applications. However, the results demonstrate that significant efficiency enhancement can be realized. Short circuit current enhancement due to downshifting is demonstrated (~1%) in small scale LSS DS polymer films prepared and attached to DSSC devices, where the specific geometry limits the photon collection efficiency and overall enhancement. Model predictions indicate that 2-3% enhancement is realizable in DSSC minimodules, compared to minimodules using passive, non-luminescent, UV-BL. Predicted enhancement in energy produced in outdoor conditions is 3-5%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.