No abstract

The design and manufacture of artificial tissue for knee joints have been highlighted recently among researchers which necessitates an apt approach for its assessment. Even though most re-searches have focused on specific mechanical or tribological tests, other aspects have remained underexplored. In this review, elemental keys for design and testing artificial cartilage are dis-cussed and advanced methods addressed. Articular cartilage structure, its compositions in load-bearing and tribological properties of hydrogels, mechanical properties, test approaches and wear mechanisms are discussed. Bilayer hydrogels as a niche in tissue artificialization are presented, and recent gaps are assessed.

No abstract

No abstract

Abstract-A study on a Circular cylindrical thin-walled shell failure made of GRP composite subjected to static internal and external pressure was carried out. The results were acquired using analytical and FEM simulation approaches for various volumetric fiber fractions. Fiber breakage, matrix breakage, interlaminate shear deformation, delamination shear deformation and micro buckling failure were investigated employing maximum failure criteria against internal and external pressure. One-ply cylindrical shell with fiber angle orientation of 0 degree was modeled in ABAQUS finite element simulation and the result was varied using analytical approaches. Moreover, the pressure fluctuations for various volumetric fiber fraction were quadratic according to plotted graphs. Meanwhile, MATLAB software was used for theoretical analysis. The comparison of two approaches was proved to be accurate. Subsequently, failure strength of various laminated GFRP cylindrical shell with different fiber angle orientations at each ply was studied for diverse volumetric fiber fraction factors. Stacking sequence, fiber angle orientations were mainly effective on failure strength.Index Terms-Volumetric fiber fraction factor, internal and external pressure, GFRP composite cylindrical shell, failure strength, theoretical analysis, finite element simulation.