Magnetically coupled resonance wireless power transfer systems (MCR WPT) have been developed in recent years. There are several key benefits of such systems, including dispensing with power cords, being able to charge multiple devices simultaneously, and having a wide power range. Hence, WPT systems have been used to supply the power for many applications, such as electric vehicles (EVs), implantable medical devices (IMDs), consumer electronics, etc. The literature has reported numerous topologies, many structures with misalignment effects, and various standards related to WPT systems; they are usually confusing and difficult to follow. To provide a clearer picture, this paper aims to provide comprehensive classifications for the recent contributions to the current state of MCR WPT. This paper sets a benchmark in order to provide a deep comparison between different WPT systems according to different criteria: (1) compensation topologies; (2) resonator structures with misalignment effects; and, (3) electromagnetic field (EMF) diagnostics and electromagnetic field interference (EMI), including the WPT-related standards and EMI and EMF reduction methods. Finally, WPT systems are arranged according to the application type. In addition, a WPT case study is proposed, an algorithm design is given, and experiments are conducted to validate the results obtained by simulations.

Multilevel inverters (MLIs) have become a trend in the field of DC/AC inverters and one of the main requirements in many of the industrial applications. MLIs spread in the academic research field and replaced the conventional inverters due to the several advantages that these topologies presented over the conventional inverters, as follows. (1) Operate with a high number of steps in the output voltage waveform, which helps in reducing the level of harmonics and presents fine and clear waveforms; furthermore, reduce the voltage stress on the switching devices and gives it a long lifetime and more reliability. (2) MLIs have a low rating of the switching devices, which has a noticeable role in reducing the system cost. (3) MLIs can be operated at both higher and lower switching frequencies, which reduces the level of power losses and enhances the overall efficiency. The main problem that faces the researchers in the multilevel inverters field is to design a topology that uses the optimum number of components to ensure the low cost and obtain a high efficiency. This paper presents a description of different topologies of MLIs that were investigated in the last two decades to show the pros and cons of each topology. Also a set of performance parameters that were used to measure the effectiveness of the MLI topologies have been discussed.

No abstract

The static and dynamic economic dispatch problems are solved by creating an enhanced version of ant lion optimisation (ALO), namely a tournament selection-based ant lion optimisation (TALO) method. The proposed algorithm is presented to solve the combined economic and emission dispatch (CEED) problem with considering the generator constraints such as ramp rate limits, valvepoint effects, prohibited operating zones and transmission loss. The proposed algorithm’s efficiency was tested using a 5-unit generating system in MATLAB R2021a during a 24-hour time span. When compared to previous optimization methods, the suggested TALO reduces the costs of fuel and pollution by 9.01 and 4.7 percent, respectively. Furthermore, statistical analysis supports the suggested TALO optimization superiority over other methods. It is observed that the renewable energy output can be stabilized in the future by combining a hybrid dynamic economic and emission dispatch model with thermal power units, wind turbines, solar and energy storage devices to achieve the balance between operational costs and pollutant emissions.

The degradation of solar photovoltaic (PV) modules is caused by a number of factors that have an impact on their effectiveness, performance, and lifetime. One of the reasons contributing to the decline in solar PV performance is the aging issue. This study comprehensively examines the effects and difficulties associated with aging and degradation in solar PV applications. In light of this, this article examines and analyzes many aging factors, including temperature, humidity, dust, discoloration, cracks, and delamination. Additionally, the effects of aging factors on solar PV performance, including the lifetime, efficiency, material degradation, overheating, and mismatching, are critically investigated. Furthermore, the main drawbacks, issues, and challenges associated with solar PV aging are addressed to identify any unfulfilled research needs. Finally, this paper provides new directions for future research, best practices, and recommendations to overcome aging issues and achieve the sustainable management and operation of solar energy systems. For PV engineers, manufacturers, and industrialists, this review’s critical analysis, evaluation, and future research directions will be useful in paving the way for conducting additional research and development on aging issues to increase the lifespan and efficiency of solar PV.