No abstract

No abstract

Mycelium and mycelium-biomass composites are emerging as new sustainable materials with useful flame-retardant potentials. Here we report a detailed characterisation of the thermal degradation and fire properties of fungal mycelium and mycelium-biomass composites. Measurements and analyses are carried out on key parameters such as decomposition temperatures, residual char, and gases evolved during pyrolysis. Pyrolysis flow combustion calorimetry (PCFC) evaluations reveal that the corresponding combustion propensity of mycelium is significantly lower compared to poly(methyl methacrylate) (PMMA) and polylactic acid (PLA), indicating that they are noticeably less prone to ignition and flaming combustion, and therefore safer to use. The hyphal diameters of mycelium decrease following pyrolysis. Cone calorimetry testing results show that the presence of mycelium has a positive influence on the fire reaction properties of wheat grains. This improvement is attributable to the relatively higher charring tendency of mycelium compared to wheat grain, which reduces the heat release rate (HRR) by acting as a thermal insulator and by limiting the supply of combustible gases to the flame front. The mycelium growth time has been found to yield no significant improvements in the fire properties of mycelium-wheat grain composites.

Summary Mycelial growth attracts academic and commercial interest because of its ability to upcycle agricultural and industrial wastes into economical and environmentally sustainable composite materials using a natural, low‐energy manufacturing process able to sequester carbon. This study aims to characterise the effect of varying ratios of high silica agricultural and industrial wastes on the flammability of mycelium composites, relative to typical synthetic construction materials. The results reveal that mycelium composites are safer than the traditional construction materials considered, producing much lower average and peak heat release rates and longer time to flashover. They also release significantly less smoke and CO2, although CO production fluctuated. Rice hulls yielded significant char and silica ash which improved fire performance, but composites containing glass fines exhibited the best fire performance because of their significantly higher silica concentrations and low combustible material content. Higher concentrations of glass fines increased volume‐specific cost but reduced mass‐specific and density‐specific costs. The findings of this study show that mycelium composites are a very economical alternative to highly flammable petroleum‐derived and natural gas‐derived synthetic polymers and engineered woods for applications including insulation, furniture, and panelling.

No abstract

Chitin and its derivative chitosan are popular constituents in wound-treatment technologies due to their nanoscale fibrous morphology and attractive biomedical properties that accelerate healing and reduce scarring. These abundant natural polymers found in arthropod exoskeletons and fungal cell walls affect almost every phase of the healing process, acting as hemostatic and antibacterial agents that also support cell proliferation and attachment. However, key differences exist in the structure, properties, processing, and associated polymers of fungal and arthropod chitin, affecting their respective application to wound treatment. High purity crustacean-derived chitin and chitosan have been widely investigated for wound-treatment applications, with research incorporating chemically modified chitosan derivatives and advanced nanocomposite dressings utilizing biocompatible additives, such as natural polysaccharides, mineral clays, and metal nanoparticles used to achieve excellent mechanical and biomedical properties. Conversely, fungi-derived chitin is covalently decorated with -glucan and has received less research interest despite its mass production potential, simple extraction process, variations in chitin and associated polymer content, and the established healing properties of fungal exopolysaccharides. This review investigates the proven biomedical properties of both fungal- and crustacean-derived chitin and chitosan, their healing mechanisms, and their potential to advance modern wound-treatment methods through further research and practical application.

Mycelium, the vegetative growth of filamentous fungi, has attracted increasing commercial and academic interest in recent years due to its ability to upcycle agricultural and industrial wastes into low-cost, sustainable composite materials. However, mycelium composites typically exhibit foam-like mechanical properties, primarily originating from their weak organic filler constituents. Fungal growth can be alternatively utilised as a low-cost method for ondemand generation of natural nanofibrils, such as chitin and chitosan, which can be grown and isolated from liquid wastes and by-products in the form of fungal micro-filaments. This study characterised polymer extracts and nanopapers produced from a common mushroom reference and various species of fungal mycelium grown on the sugarcane by-product molasses. Polymer yields of ~10-26% were achieved, which is comparable to those of crustacean-derived chitin, and the nanopapers produced exhibited much higher tensile strengths than existing mycelium materials, with values of up to ~25 MPa (mycelium) and ~98 MPa (mushroom), in addition to useful hydrophobic surface properties resulting from the presence of organic lipid residues in the nanopapers. HCl or H 2 O 2 treatments were used to remove these impurities facilitating tuning of mechanical, thermal and surface properties of the nanopapers produced. This potentially enables their use in a wide range of applications including coatings, membranes, packaging and paper.

Greener alternatives to synthetic polymers are constantly being investigated and sought after. Chitin is a natural polysaccharide that gives structural support to crustacean shells, insect exoskeletons, and fungal cell walls. Like cellulose, chitin resides in nanosized structural elements that can be isolated as nanofibers and nanocrystals by various top-down approaches, targeted at disintegrating the native construct. Chitin has, however, been largely overshadowed by cellulose when discussing the materials aspects of the nanosized components. This Perspective presents a thorough overview of chitin-related materials research with an analytical focus on nanocomposites and nanopapers. The red line running through the text emphasizes the use of fungal chitin that represents several advantages over the more popular crustacean sources, particularly in terms of nanofiber isolation from the native matrix. In addition, many β-glucans are preserved in chitin upon its isolation from the fungal matrix, enabling new horizons for various engineering solutions.