Ultra-wide-bandgap gallium oxide (Ga2O3) devices have recently emerged as promising candidates for power electronics; however, the low thermal conductivity (kT) of Ga2O3 causes serious concerns about their electrothermal ruggedness. This work presents the first experimental demonstrations of largearea Ga2O3 Schottky barrier diodes (SBDs) packaged in the bottom-side-cooling and double-side-cooling configurations, and for the first time, characterizes the surge current capabilities of these packaged Ga2O3 SBDs. Contrary to popular belief, Ga2O3 SBDs with proper packaging show high surge current capabilities. The double-side-cooled Ga2O3 SBDs with a 3×3 mm 2 Schottky contact area can sustain a peak surge current over 60 A, with a ratio between the peak surge current and the rated current superior to that of similarly-rated commercial SiC SBDs. The key enabling mechanisms for this high surge current are the small temperature dependence of on-resistance, which strongly reduces the thermal runaway, and the double-side-cooled packaging, in which the heat is extracted directly from the Schottky junction and does need to go through the low-kT bulk Ga2O3 chip. These results remove some crucial concerns regarding the electrothermal ruggedness of Ga2O3 power devices and manifest the significance of their die-level thermal management. 1

No abstract

Edge termination is the enabling building block of power devices to exploit the high breakdown field of wide bandgap (WBG) and ultra-wide bandgap (UWBG) semiconductors. This work presents a heterogeneous junction termination extension (JTE) based on p-type nickel oxide (NiO) for gallium oxide (Ga2O3) devices. Distinct from prior JTEs usually made by implantation or etch, this NiO JTE is deposited on the surface of Ga2O3 by magnetron sputtering. The JTE consists of multiple NiO layers with various lengths to allow for a graded decrease in effective charge density away from the device active region. Moreover, this surface JTE has broad design window and process latitude, and its efficiency is drift-layer agnostic. The physics of this NiO JTE is validated by experimental applications into NiO/Ga2O3 p–n diodes fabricated on two Ga2O3 wafers with different doping concentrations. The JTE enables a breakdown voltage over 3.2 kV and a consistent parallel-plate junction field of 4.2 MV/cm in both devices, rendering a power figure of merit of 2.5–2.7 GW/cm2. These results show the great promise of the deposited JTE as a flexible, near ideal edge termination for WBG and UWBG devices, particularly those lacking high-quality homojunctions.

The outstanding properties of Gallium Nitride (GaN) have enabled considerable improvements in the performance of power devices compared to traditional silicon technology, resulting in more efficient and highly compact power converters. GaN power technology has rapidly developed and is expected to gain a significant market share in an increasing number of applications in the coming years. However, despite the great progress, the performance of current GaN devices is still far from what the GaN material could potentially offer, and a significant reduction of the device on-resistance for a certain blocking voltage is needed. Conventional GaN high-electron-mobility-transistors are based on a single two-dimensional electron gas (2DEG) channel, whose trade-off between electron mobility and carrier density limits the minimum achievable sheet resistance. To overcome such limitations, GaN power devices including multiple, vertically stacked 2DEG channels have recently been proposed, showing much-reduced resistances and excellent voltage blocking capabilities for a wide range of voltage classes from 1 to 10 kV. Such devices resulted in unprecedented high-power figures of merit and exceeded the SiC material limit, unveiling the full potential of lateral GaN power devices. This Letter reviews the recent progress of GaN multi-channel power devices and explores the promising perspective of the multi-channel platform for future power devices.

No abstract

No abstract

No abstract

No abstract