Self-powered energy harvesters utilizing triboelectric effect and electrostatic induction have been widely studied, leading in the materials viewpoint to numerous material pairs for facile charge separation upon repetitive contacts with elaborate topological structures. Here, we present a simple but robust triboelectric platform based on a molecularly engineered surface triboelectric nanogenerator by self-assembled monolayers (METS). Triboelectric surface charge density of a substrate was readily controlled by the variation of end-functional groups of self-assembled monolayers (SAMs). In particular, by employing fluorine terminated SAMs, we are able to develop a METS with the maximum open circuit voltage and short circuit current of 105 V and 27 μA, respectively, under relatively gentle mechanical contacts with the 3N vertical force at 1.25 Hz. The power density of the device was 1.8 W/m 2 at the load resistance of 10 MΩ more than 60 times greater than that of an unmodified dielectric/Al device. Moreover, our approach with SAMs was extended to various types of surfaces including fabrics of silk, cotton, and poly(ethylene terephthalate) (PET) and a PET film, and the results of singlefriction-surface triboelectric nanogenerators with these materials offers a facile and universal guideline for designing triboelectic materials.
A flexible piezoelectric strain energy harvester that is responsive to multi-directional input forces produced by various human motions is proposed. The structure of the harvester, which includes a polydimethylsiloxane (PDMS) bump, facilitates the effective conversion of strain energy, produced by input forces applied in random directions, into electrical energy. The structural design of the PDMS bump and frame as well as the slits in the piezoelectric polyvinylidene fluoride (PVDF) film provide mechanical flexibility and enhance the strain induced in the PVDF film under input forces applied at various angles. The amount and direction of the strain induced in PVDF can be changed by the direction of the applied force; thus, the generated output power can be varied. The measured maximum output peak voltage is 1.75, 1.29, and 0.98 V when an input force of 4 N (2 Hz) is applied at angles of 0°, 45°, and 90°, and the corresponding maximum output power is 0.064, 0.026, and 0.02 μW, respectively. Moreover, the harvester stably generates output voltage over 1.4 × 104 cycles. Thus, the proposed harvester successfully identifies and converts strain energy produced by multi-directional input forces by various human motions into electrical energy. We demonstrate the potential utility of the proposed flexible energy harvester as a self-powered human motion sensor for wireless healthcare systems.
A new design of flexible energy harvester to utilize piezoelectric and electrostatic energy conversion mechanisms simultaneously from a single mechanical energy source is proposed. This non-resonant type harvester enables low-frequency mechanical inputs to be converted to electricity, and the polymeric structures make the harvester mechanically flexible, allowing it to be applied to non-planar surfaces. The fabricated harvester generated peak- and average power densities of 159 and 1.79 μW cm−2 respectively by piezoelectric conversion, and 52.9 μW cm−2 and 1.59 nW cm−2 respectively by electrostatic conversion from an input force of 1.2 N at 3 Hz. Considering its flexibility and ability to harvest mechanical inputs at frequencies below 3 Hz, low-frequency human movements could be a potential energy source for the proposed hybrid harvester to exploit.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.