This study describes the use of bentonite in suspension for the caffeine adsorption (pollutant of emerging concern) by taking different conditions of the pH, adsorbent mass, adsorbent calcination temperature and interferents into account. The results were compared with those obtained using bentonite immobilized in alginate beads. The acid medium has a greater efficiency for the caffeine adsorption and the adsorbent calcination temperature exerts, due to structural changes. Caffeine removal higher than 90% was obtained at optimized conditions. The Langmuir model indicated a better fit of the data and the adsorption capacity of caffeine onto bentonite. The bentonite immobilized led to a slower adsorption process in relation to the suspended.

No abstract

This study describes the experimental design and optimization of the photocatalytic reaction using the immobilized catalyst Fe/Nb2O5 in the degradation of Triclosan and 2.8-DCDD. The techniques employed to characterize the photocatalysts were: specific surface area, average pore volume, average pore diameter, photo-acoustic spectroscopy (PAS), X-ray diffraction (XRD), and scanning electron microscopy (SEM/EDS). The reaction parameters studied were pH, catalyst concentration, catalyst calcination temperature, and nominal metallic charge. The results indicated that the immobilized Fe/Nb2O5 catalysts were efficient in the degradation of Triclosan and 2.8-dichlorodibenzene-p-dioxin. The catalysts with nominal metal loading of 1.5% Fe calcined at 873 K showed the highest constant reaction rate and the lowest half-life 0.069 min−1 and 10.04 min. Tests in different matrices indicated that the photocatalytic reaction using aqueous solution containing Cl− is faster when compared with the ultrapure water matrix.

No abstract

No abstract

No abstract

This study describes the application of Ag/Nb 2 O 5 catalysts, suspension and spheres alginate immobilized for the degradation of 17α-Ethinylestradiol (EE2). The techniques used to characterize the photocatalysts were as follows: X-ray diffraction (XRD), N 2 adsorption-desorption analysis (BET), point charge zero charge (PZC), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Different catalyst calcination temperatures were studied by keeping the silver metal loading at 5%. Among the operational conditions analyzed were pH, catalyst concentration, the emitting source of radiation and the inlet flow rate (in continuous operation). The results of the experiments performed initially with the catalyst in suspension revealed that the highest catalytic activity in the degradation of EE2 was the 5%Ag/Nb 2 O 5 catalyst calcined at 973 K, which removed 77.7% of the initial pollutant concentration in 120 min of reaction. The immobilization of the catalyst in alginate spheres resulted in a degradation reduction, being able to degrade 69.2% of the initial EE2 in a batch system. In the continuous system, the immobilized catalyst obtained a total degraded of 37.3%, with a flow rate of 10 L•h −1 . Catalyst reuse was promising, even dropping the removal, degrading around 27% of the initial EE2 concentration in the third cycle of use. KeywordsSpheres alginate • Emerging pollutants • Contaminants of emerging concern • Advanced oxidation process • Thermal treatment

No abstract