Experimental Design and Optimization of Triclosan and 2.8-Diclorodibenzeno-p-dioxina Degradation by the Fe/Nb2O5/UV System

Abstract

This study describes the experimental design and optimization of the photocatalytic reaction using the immobilized catalyst Fe/Nb2O5 in the degradation of Triclosan and 2.8-DCDD. The techniques employed to characterize the photocatalysts were: specific surface area, average pore volume, average pore diameter, photo-acoustic spectroscopy (PAS), X-ray diffraction (XRD), and scanning electron microscopy (SEM/EDS). The reaction parameters studied were pH, catalyst concentration, catalyst calcination temperature, and nominal metallic charge. The results indicated that the immobilized Fe/Nb2O5 catalysts were efficient in the degradation of Triclosan and 2.8-dichlorodibenzene-p-dioxin. The catalysts with nominal metal loading of 1.5% Fe calcined at 873 K showed the highest constant reaction rate and the lowest half-life 0.069 min−1 and 10.04 min. Tests in different matrices indicated that the photocatalytic reaction using aqueous solution containing Cl− is faster when compared with the ultrapure water matrix.

17 α-Ethinylestradiol Degradation in Continuous Process by Photocatalysis Using Ag/Nb2O5 Immobilized in Biopolymer as Catalyst

“…These phases can only be obtained from Ag and Nb 2 O 5 precursors calcined at elevated temperatures. Considering pure niobium pentoxide, Fidelis et al [19] observed that non-calcined Nb 2 O 5 samples, initially with amorphous structure, transformed into TT and T-Nb 2 O 5 crystalline phases when calcined at temperatures higher than 673 K (773-873 K). Liu et al and Chen et al, could only obtain the AgNb 13 O 33 phase after calcining their samples, respectively, at 1073 K for 3 h [20] and 1263 K for 12 h [21].…”

Solar light–driven photocatalysis using BaFe2O4/rGO for chlorhexidine digluconate–contaminated water: comparison with artificial UV and visible light–mediated photocatalysis

“…Thus, the development of efficient technologies are highly desired to remove PCPs and pharmaceuticals such as CHD from the aquatic ecosystem (Fidelis et al, 2019). Adsorption is an efficient and economical treatment for organic pollutant but with some limitations such as inefficient in complete degradation and leads to the secondary pollutant.…”

Catalysis for Global Development. Contributions around the Iberoamerican Federation of Catalysis

“…Catalysis plays a crucial role in environmental protection, whether by recycling waste or by reducing gas emissions that contribute to increasing global warming-thereby opening new routes for eco-friendly processes and products that are sustainable and ecologically correct. It is on these topics and directly-related subjects that sixteen selected contributions from the Iberoamerican Federation of Catalysis are gathered in this Special Issue [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].…”