No abstract

No abstract

Air-texturisation is a process that adds bulkiness to bundles of fibres. In this study, the permeability and compaction behaviour of air-texturised glass fibre rovings are experimentally characterised and compared to conventional unidirectional rovings. Based on radial impregnation experiments and single-step compaction/decompaction tests, the following main findings are highlighted: Compared to conventional unidirectional-rovings, the normalised permeability of the air-texturised rovings was approximately three times higher along the fibre direction and 40 times higher transverse to the fibre direction. Accordingly, the degree of anisotropy was approximately one magnitude lower. At a compaction pressure of 1 and 5 bar, the air-texturised rovings were compacted to a volume fraction of [Formula: see text] and 0.43, respectively, which was approximately 30% lower than the volume fraction achieved for the conventional unidirectional-rovings. Finally, it was observed that the decompaction of air-texturised rovings exhibits a more distinct elastic response when unloaded.

No abstract

Pultruded fiber-reinforced polymer composites are susceptible to microstructural nonuniformity such as variability in fiber volume fraction (Vf), which can have a profound effect on process-induced residual stress. Until now, this effect of non-uniform Vf distribution has been hardly addressed in the process models. In the present study, we characterized the Vf distribution and accompanying nonuniformity in a unidirectional fiber-reinforced pultruded profile using optical light microscopy. The identified nonuniformity in Vf was subsequently implemented in a mesoscale thermal–chemical–mechanical process model, developed explicitly for the pultrusion process. In our process model, the constitutive material behavior was defined locally with respect to the corresponding fiber volume fraction value in different-sized representative volume elements. The effect of nonuniformity on the temperature and cure degree evolution, and residual stress was analyzed in depth. The results show that the nonuniformity in fiber volume fraction across the cross-section increased the absolute magnitude of the predicted residual stress, leading to a more scattered residual stress distribution. The observed Vf gradient promotes tensile residual stress at the core and compressive residual stress at the outer regions. Consequently, it is concluded that it is essential to take the effects of nonuniformity in fiber distribution into account for residual stress estimations, and the proposed numerical framework was found to be an efficient tool to study this aspect.

In this paper has a numerical framework for multiphysical simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process been developed. Using the framework, the material flow through the pultrusion die was studied for the manufacture of a 100 mm thick glass fibre reinforced polyurethane (thermoset) composite profile. The results demonstrated that while curing is initiated near the heated die-walls, a yet stronger reaction is simultaneously obtained at the centre of the profile. The results were qualitatively compared to measurements from an industrial pultrusion line, which confirmed the trends of the material flow. * Estimated based on hexagonal stacking and a fibre radius of R = 17/2µm. † In-house data

 Users may download and print one copy of any publication from the public portal for the purpose of private study or research.  You may not further distribute the material or use it for any profit-making activity or commercial gain  You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.

No abstract