Aflatoxins comprise a group of mycotoxins that are found in the environment. Exposure to aflatoxins has been reported to cause serious health problems in humans. Since aflatoxin M1 (AFM1) is secreted in breast milk, the exposure of infants to this toxin is an important concern. The aim of this study was to determine the prevalence, levels of, and factors associated with the presence of AFM1 in breast milk of mothers in Fethiye, Turkey. Breast milk samples were taken from 100 mothers who had given birth over the period of October–November 2017. The AFM1 content of the samples was determined via enzyme-linked immunosorbent assay. The lowest limit for milk samples in the Ridascreen® AFM1 commercial test kit is 5 ng/L. Because of this, AFM1 levels below 5 ng/L in the breast milk samples were assessed as negative. Of the breast milk samples tested, 53 were positive. The average AFM1 amount in the positive samples was 6.36 ng/L (ppt; range 5.10–8.31 ng/L). Mothers who were housewives, lived in damp, humid houses, or ate spices or dried fruits and vegetables had significantly greater prevalence of AFM1 in their breast milk than those who were employed, did not report dampness or mold in the home, or did not eat spices or dried fruits and vegetables. AFM1 in breast milk could be an important risk factor for infant health. Informing the public about food safety could reduce the amount of AFM1 being transferred into breast milk via food channels.
Titanium and its alloys are widely utilized in the biomedical sector, they still exhibit poor tribological properties and low wear resistance when employed against even weaker substances. The poor hardness, instability, high coefficient of friction, low load-carrying capacity, and insufficient resistance to not only abrasive but also adhesive wear are further disadvantages of titanium alloys. The focus of this investigation is on the tribological performance of Ti-6Al-4 V alloy in contact with WC carbide abrasive balls when subjected to nanodoped cooling and lubrication conditions. Tribological experiments were executed on Ti-6Al-4 V flat samples using a ball-on-flat tribometer in dry hybrid graphene/boron nitride combination nanoparticles (MQL, nano-3), nanographene with MQL (nano-1), and boron nitride with MQL (nano-2) conditions. After that, the most significant tribological characteristics were investigated, including volume loss, friction coefficient, wear rate, and micrographic structures. The outcomes also demonstrated that the hybrid nanoparticle situation experienced the least amount of volume loss.
Additive manufacturing (AM), which has only relatively recently emerged as one of the most significant sectors, is currently the subject of a great number of research investigations. In contrast to machining, additive manufacturing (AM) is a process that involves the division of items into very thin layers, followed by the production of these layers by stacking previous layers atop one another. AM has found new application areas because to the decrease in weight as well as other advantages in a variety of industries including aviation, automotive, and biomedical. In this manner, features that cannot be acquired from solid materials have been disclosed through the utilization of various forms of lattice structures in accordance with the needs of the application. The design factors that impact the compression behavior of body-centered cubic (BCC) and face-centered cubic (FCC) type lattice structures, which are the most popular types of lattice structures used in additive manufacturing, were explored in this review work.
OBJECTIVE: Breastfeeding in women with aflatoxin M1 exposure may be a risk factor for the newborn. Thus, it is crucial to determine aflatoxin M1 levels in breast milk and raise mothers' awareness about nutrition in lactation and other periods. This study was carried out to determine aflatoxin M1 contamination in milk samples taken from mothers who gave birth. METHODS:The study was carried out in the postpartum department of Training and Research Hospital between December 31, 2018, and June 31, 2019, and 90 breastfeeding mothers were included in the study. RESULTS: A total of 75 (83.3%) of the examined samples were found positive. The mean aflatoxin M1 ratio in positive samples was 12.16 pg/mL (5.00-23.18 pg/mL). Mothers' consumption of processed food was associated with aflatoxin M1 levels (p=0.043). It was determined that the aflatoxin M1 levels of mothers who consumed processed food products 1 or 2 times a month were 3.22 times lower than those who consumed 1-2 times a week. CONCLUSIONS: This study emphasized the importance of monitoring aflatoxin M1 levels in breast milk for infant health. It is thought that nutrition education given to mothers during pregnancy will significantly impact aflatoxin M1 results. In addition, the dangers of mycotoxins in mother-infant nutrition should be emphasized regularly in health education.
In this study, heavy metal concentrations including cadmium, lead, zinc, copper and arsenic concentrations were determined in five fish species (Capoeta sieboldii, Capoeta tinca, Scardinius erythrophthalmus, Squalius pursakensis and Barbus escherichii) obtained from the Sakarya River. The metal concentrations of fish supplied in four different seasons (winter, spring, summer and autumn) were determined by using atomic absorption spectrophotometry. Although the metal concentrations showed seasonal variations in some fish species and also varied with respect to particular fish species, the concentrations of these metals were found to be within the permissible limits. In addition, it was concluded that the concentration of metal contamination in the evaluated fish species would not pose a risk for human consuming fish species obtained from Sakarya River by considering estimated daily intake (EDI), target hazard quotient (THQ), hazard index (HI), and target cancer risk (TCR) values.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.