Phononic crystals (PnCs) are the acoustic wave equivalent of photonic crystals, where a periodic array of scattering inclusions located in a homogeneous host material causes certain frequencies to be completely reflected by the structure. In conjunction with creating a phononic band gap, anomalous dispersion accompanied by a large reduction in phonon group velocities can lead to a massive reduction in silicon thermal conductivity. We measured the cross plane thermal conductivity of a series of single crystalline silicon PnCs using time domain thermoreflectance. The measured values are over an order of magnitude lower than those obtained for bulk Si (from 148 W m(-1) K(-1) to as low as 6.8 W m(-1) K(-1)). The measured thermal conductivity is much smaller than that predicted by only accounting for boundary scattering at the interfaces of the PnC lattice, indicating that coherent phononic effects are causing an additional reduction to the cross plane thermal conductivity.
This paper introduces approaches that combine micro/nanomolding, or nanoimprinting, techniques with proximity optical phase mask lithographic methods to form three dimensional (3D) nanostructures in thick, transparent layers of photopolymers. The results demonstrate three strategies of this type, where molded relief structures in these photopolymers represent (i) fine (<1 microm) features that serve as the phase masks for their own exposure, (ii) coarse features (>1 microm) that are used with phase masks to provide access to large structure dimensions, and (iii) fine structures that are used together phase masks to achieve large, multilevel phase modulations. Several examples are provided, together with optical modeling of the fabrication process and the transmission properties of certain of the fabricated structures. These approaches provide capabilities in 3D fabrication that complement those of other techniques, with potential applications in photonics, microfluidics, drug delivery and other areas.
This Feature Article reviews recent work on an optical technique for fabricating, in a single exposure step, three-dimensional (3D) nanostructures with diverse structural layouts. The approach, which we refer to as proximity field nanopatterning, uses conformable, elastomeric phase masks to pattern thick layers of transparent, photosensitive materials in a conformal contact mode geometry. Aspects of the optics, the materials, and the physical chemistry associated with this method are outlined. A range of 3D structures illustrate its capabilities, and several application examples demonstrate possible areas of use in technologies ranging from microfluidics to photonic materials to density gradient structures for chemical release and high-energy density science.
We report on the experimental realization of a phononic crystal, designed to operate at gigahertz frequencies. Detailed studies of the structure have been performed using finite difference time domain method to determine effects of slab modes in finite-thickness slabs, thus enabling precise guidance of experimental efforts. In particular, we find the slab mode effects mitigated in ultrathin ͑thickness less than lattice periodicity͒ and ultrathick ͑thickness more than ten times lattice periodicity͒ slabs. Gigahertz-frequency phononic crystals are well poised to find usage as high-Q resonators, waveguides, and coupling elements in a variety of application areas including RF communications.
Phononic crystals have numerous potential applications including use as filters and oscillators in communications systems and as acoustic isolators for resonant sensors such as gyroscopes. These applications are based on the ability of phononic crystals to exhibit elastic band gaps, frequency bands where the propagation of acoustic waves is forbidden. Here, we focus on solid-solid phononic crystals (solid inclusions in a solid matrix), since they typically exhibit wider band gaps than those observed with air-solid phononic crystals (air inclusions in a solid matrix). We present a micromachined solid-solid phononic crystal operating at 1.4 GHz center frequency with an ultrawide 800 MHz band gap.
A technique based on suspended islands is described to measure the in-plane thermal conductivity of thin films and nano-structured materials, and is also employed for measurements of several samples with a single measurement platform. Using systematic steps for measurements, the characterization of the thermal resistances of a sample and its contacts are studied. The calibration of the contacts in this method is independent of the geometry, size, materials, and uniformity of contacts. To verify the technique, two different Si samples with different thicknesses and two samples of the same SiN(x) wafer are characterized on a single device. One of the Si samples is also characterized by another technique, which verifies the current results. Characterization of the two SiN(x) samples taken from the same wafer showed less than 1% difference in the measured thermal conductivities, indicating the precision of the method. Additionally, one of the SiN(x) samples is characterized and then demounted, remounted, and characterized for a second time. The comparison showed the change in the thermal resistance of the contact in multiple measurements could be as small as 0.2 K/μW, if a similar sample is used.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.