Real-time kinematic (RTK) technique is important for mapping applications requiring short measure time, the distance between rover and base station, and high accuracy. There are several RTK methods used today such as the traditional RTK, long base RTK (LBRTK), network RTK (NRTK), and precise point positioning RTK (PPP-RTK). NRTK and LBRTK are popular with the advantage of the distance, the time, and accuracy. In the present study, the NRTK and LBRTK measurements were compared in terms of accuracy and distance in a test network with 6 sites that was established between 5 and 60 km. Repetitive NRTK and LBRTK measurements were performed on 6 different days in 2015-2017-2018 and additionally 4 campaigns of repetitive static measurements were carried out in this test network. The results of NRTK and LBRTK methods were examined and compared with all relevant aspects by considering the results of the static measurements as real coordinates. The study results showed that the LBRTK and NRTK methods yielded similar results at base lengths up to 40 km with the differences less than 3 cm horizontally and 4 cm vertically.
In the actively deforming region of western Anatolia, crustal deformation is accommodated by destructive earthquakes and a variety of aseismic events. In this study, we investigated the 2016–2017 aseismic sequence located in the Bolvadin Fault, one of the segments of the Akşehir-Simav Fault System of western Anatolia by analysing surface deformation derived from detailed geological mapping. Our findings suggest that surface deformation in the Bolvadin Fault is accommodated by aseismic episodes. During the field studies in the Bolvadin area, progressive surface deformations, such as surface faults and earth fissures with a length of 800 meters to 3 kilometres and strike of N15°E to N70°E were mapped on a 1/5000 scale. Furthermore, a levelling network was established to calculate the vertical displacements and deformation rate along the surface deformations. Precision level measurements were undertaken in 2016 and 2017. On the routes to the NW of the Bolvadin settlement, a vertical deformation rate of 30 mm/yr was detected in the period of 2016–2017, and a large deformation rate of 40 mm/yr was detected in the same period.
Yer yüzey sıcaklığı (YYS) arazi sıcaklığının sürekli mekânsal değişimidir ve yer yüzeyinin ışınsal cildi olarak tanımlanabilen sayısal bir veridir. Yer yüzeyini kaplayan yapay ve doğal objelerin cinsine bağlıdır. YYS'nin sıcaklık ile olan direkt ilişkisi göz önüne alındığında, bir çalışma bölgesindeki sıcaklık değişimi, YYS ile temsil edilebilir. YYS; kentleşme, orman kaybı, kentsel alanlarda yeşillik, insan sağlığı, şehir planlaması gibi birçok bölgesel ve küresel ölçekli çalışmalarda önemli bir parametredir. YYS belirleme çalışmalarının uzaktan algılama ile yapılması son yılların önemli akademik konularından biri olmuştur. Uzaktan algılama ile YYS anomalilerinin belirlenmesinde veri kaynağı olarak termal bantlara sahip uydu algılayıcıları veya hava kameraları kullanılabilmektedir. Uydu verileri bu alanda daha fazla kullanılmaktadır çünkü uydu verileri yeryüzünü büyük parçalar halinde sinoptik bir görüş ile düzenli bir şekilde farklı dalga boylarında kaydeder. Ayrıca hava kameralarına göre daha az çözünürlüğe sahip olmasına rağmen tek çerçevede geniş alanları kapsaması, zaman tasarrufu, maliyet ve erişilebilirlik açısından avantajlıdır. Landsat algılayıcıları, yüksek çözünürlüğü, 30 yılı aşkın bir sürelik veri aralığına sahip olması ve tarama genişliğinin yüksek olmasından dolayı YYS belirleme çalışmalarında sıkça kullanılmaktadır. Bu çalışmada Afyonkarahisar il sınırları içerisindeki bir bölgeye ait Landsat verileri temine dilerek YYS üretilmiştir. Ayrıca YYS'e yükseklik farklarından kaynaklanan etkilerin giderilmesi için çalışmaya sayısal yükseklik modeli(SYM) ve ravinsonde verileri dâhil edilmiştir. Böylece oluşturulan her bir yükseklik kuşağında YYS için düzeltmeler hesaplanarak yükseklik etkisi minimize edilmeye çalışılmıştır.
The eastern Anatolia provides one of the best examples of an area of rapid deformation and intense contraction that is the consequence of an active continental collision between the Arabian and Eurasian plates leading to large and devastating earthquakes. The latest evidence of the active tectonism in the region is revealed by two remarkable seismic events; Van-Tabanli (Mw 7.2, October 23, 2011) and Van-Edremit (Mw 5.6, November 9, 2011) earthquakes. The study of the earthquake cycle and observation of geodetic and seismic deformation in this region is very important to hazard assessments. In this study, the inter-seismic, co-seismic, and post-seismic movements caused by the above-mentioned earthquakes were investigated using the time series of 2300 days of Global Navigation Satellite Systems (GNSS) observations of the local stations selected from the network of the Continuously Operating Reference Stations, Turkey (CORS-TR). For the inter-seismic period, approximately 1100 daily data were obtained from 21 CORS-TR stations (prior to the earthquakes between October 1, 2008 and October 23, 2011) and evaluated using the GAMIT/GLOBK software. The behaviour of these stations was investigated by processing 1 Hz data from the GNSS stations during the earthquakes on the GAMIT/TRACK software. In addition to October 23 and November 9, the GNSS data on one day before and after the earthquakes was assessed to determine co-seismic deformations. During the October 23 earthquake, hanging-wall deformation of about 60 mm was detected in the SW direction at the MURA station. However, at the VAAN station, deformation of 200 mm (value predicted by time series) was observed in the footwall block in the NW direction. There were not any significant changes at the stations during the November 9 earthquake. For the post-seismic period, the GNSS data from 2012 to 2015 was evaluated. According to the observations, post-seismic deformation continued at the stations close to the epicenter of the earthquake.
Havran-Balıkesir Fay Zonu (HBFZ), Batı Anadolu’daki önemli fay zonlarından birisidir. Edremit’in doğusundan, Balıkesir’e kadar KKD–GGB yönünde uzanan HBFZ iki ana fay ve altı segmentten oluşmaktadır. Fay zonu üzerinde kapsamlı paleosismolojik çalışmalar gerçekleştirilmiş ve zonun segmentlerindeki depremsizlik süreleri sismik bir boşluk (asismik hareket, krip) olarak değerlendirilmiştir. Bu nedenle, HBFZ ‘nin depremsizlik sürelerinin detaylı olarak araştırılması amacıyla, çalışma bölgesinde 55 noktadan oluşan bir GNSS ağı oluşturulmuştur. Ağdaki 21 noktada 2022 yılında bir kampanya GNSS ölçüsü gerçekleştirilmiştir. Ağda yer alan diğer sürekli ve kampanya tipi 34 noktanın ise geçmiş yıllara ait GNSS verileri çeşitli kurumlardan temin edilmiştir. Elde edilen tüm veriler GAMIT/GLOBK yazılımıyla değerlendirilmiştir. Çalışma bölgesinin Avrasya plakası sabit hız alanı 4-25 mm/yıl aralığında ve 0.18 mm/yıl doğruluğunda elde edilmiştir. Hız alanı kullanılarak, bölgenin iki boyutlu güncel jeodezik gerinim alanı hesaplanmıştır. Gerinim alanı incelendiğinde, çalışma bölgesinde KD-GB yönlü sıkışma bileşeninin baskın olduğu görülmüştür. Ek olarak, tarihsel ve aletsel dönem deprem kataloglarından yararlanılarak çalışma bölgesinin sismotektonik haritaları oluşturulmuştur. Bu sonuçlar, ilk sonuçlar olarak sunulmaktadır. HBFZ’ nin güncel deformasyonlarının ve deprem potansiyelinin belirlenmesi için jeodezik çalışmalar devam etmektedir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.