No abstract

No abstract

Due to complex composition of leachate, the comprehensive leachate treatment methods have been not demonstrated. Moreover, the improper management of leachate can lead to many environmental problems. The aim of this study was application of Fenton process for decreasing the major pollutants of landfill leachate on Kermanshah city. The leachate was collected from Kermanshah landfill site and treated by Fenton process. The effect of various parameters including solution pH, Fe2+ and H2O2 dosage, Fe2+/H2O2 molar ratio, and reaction time was investigated. The result showed that with increasing Fe2+ and H2O2 dosage, Fe2+/H2O2 molar ratio, and reaction time, the COD, TOC, TSS, and color removal increased. The maximum COD, TOC, TSS, and color removal were obtained at low pH (pH: 3). The kinetic data were analyzed in term of zero-order, first-order, and second-order expressions. First-order kinetic model described the removal of COD, TOC, TSS, and color from leachate better than two other kinetic models. In spite of extremely difficulty of leachate treatment, the previous results seem rather encouraging on the application of Fenton's oxidation.

No abstract

BackgroundIn 2015, it was estimated that the burden of disease in Iran comprised of 19 million disability-adjusted life years (DALYs), 74% of which were due to non-communicable diseases (NCDs). The observed leading causes of death were cardiovascular diseases (41.9%), neoplasms (14.9%), and road traffic injuries (7.4%). Even so, the health research investment in Iran continues to remain limited. This study aims to identify national health research priorities in Iran for the next five years to assist the efficient use of resources towards achieving the long-term health targets.MethodsAdapting the Child Health and Nutrition Research Initiative (CHNRI) method, this study engaged 48 prominent Iranian academic leaders in the areas related to Iran’s long-term health targets, a group of research funders and policy makers, and 68 stakeholders from the wider society. 128 proposed research questions were scored independently using a set of five criteria: feasibility, impact on health, impact on economy, capacity building, and equity.FindingsThe top-10 priorities were focused on the research questions relating to: health insurance system reforms to improve equity; integration of NCDs prevention strategy into primary health care; cost-effective population-level interventions for NCDs and road traffic injury prevention; tailoring medical qualifications; epidemiological assessment of NCDs by geographic areas; equality in the distribution of health resources and services; current and future common health problems in Iran’s elderly and strategies to reduce their economic burden; the status of antibiotic resistance in Iran and strategies to promote rational use of antibiotics; the health impacts of water crisis; and research to replace the physician-centered health system with a team-based one.ConclusionsThese findings highlight consensus amongst various prominent Iranian researchers and stakeholders over the research priorities that require investment to generate information and knowledge relevant to the national health targets and policies. The exercise should assist in addressing the knowledge gaps to support both the National General Health Policies by 2025 and the health targets of the United Nations’ Sustainable Development Goals by 2030.

No abstract

No abstract

In this study, treatment of slaughterhouse wastewater by electrocoagulation was investigated in batch system using Fe electrodes. The effect of various variables such as electrode number, current density and operating time was tested. Pollutant removal efficiency increased with increasing electrode number and operating time. The biochemical oxygen demand (BOD(5))(,) chemical oxygen demand (COD), total suspended solid (TSS), and total nitrogen (TN) removal efficiencies using eight electrodes at a contact time of 50 min and a current density of 10 A/m(2) were 66, 62, 60, and 56%, respectively. Higher electrode numbers will allow shorter operating times to achieve certain removal efficiencies. Also, removal efficiencies increased by increasing the current density; the highest removal efficiencies of BOD(5,) COD, TSS, and TN at a contact time of 50 min and a current density of 25 A/m(2) were 97, 93, 81, and 84%, respectively. The results also show that the reactor pH varies directly with the current density; at 25 A/m(2), the reactor pH increased from an initial value of 7.1 to 7.7 after 50 min. The experimental results showed that the kinetics of BOD(5), COD, TSS and TN removal could be fitted adequately using a first order kinetic model (higher R(2)).