Ferroelectricity in ultrasonically exfoliated flakes of the layered Aurivillius oxide Bi5Ti3Fe0.5Co0.5O15 with a range of thicknesses is studied. These flakes have relatively large areas (linear dimensions many times the film thickness), thus classifying them as 2D materials. It is shown that ferroelectricity can exist in flakes with thicknesses of only 2.4 nm, which equals one‐half of the normal crystal unit cell. Piezoresponse force microscopy (PFM) demonstrates that these very thin flakes exhibit both piezoelectric effects and that the ferroelectric polarization can be reversibly switched. A new model is presented that permits the accurate modeling of the field‐on and field‐off PFM time domain and hysteresis loop responses from a ferroelectric during switching in the presence of charge injection, storage, and decay through a Schottky barrier at the electrode–oxide interface. The extracted values of spontaneous polarization, 0.04(±0.02) C m−2 and electrostrictive coefficient, 2(±0.1) × 10−2 m4 C−2 are in good agreement with other ferroelectric Aurivillius oxides. Coercive field scales with thickness, closely following the semi‐empirical scaling law expected for ferroelectric materials. This constitutes the first evidence for ferroelectricity in a 2D oxide material, and it offers the prospect of new devices that might use the useful properties associated with the switchable ferroelectric spontaneous polarization in a 2D materials format.

Type of publicationArticle (peer-reviewed) The fabrication of highly-oriented polycrystalline ceramics of Bi 5 Fe 0.5 Co 0.5 Ti 3 O 15 , prepared via molten salt synthesis and uniaxial pressing of high aspect ratio platelets is reported. Electron backscatter images show a secondary phase within the ceramic which is rich in cobalt and iron. The concentration of the secondary phase obtained from scanning electron microscopy is estimated at less than 2% by volume, below the detection limit of x-ray diffraction (XRD). The samples were characterized by x-ray diffraction, polarization-electric field measurements, superconducting quantum interference device as a function of sample orientation and vibrating sample magnetometry as a function of temperature. It is inferred from the data that the observed ferromagnetic response is dominated by the secondary phase. This work highlights the importance of rigorous materials characterisation in the study of multiferroics as small amounts of secondary phase, below the limit of XRD, can lead to false conclusions. V C 2012 American Institute of Physics.[http://dx

Abstract-The template grain growth technique was used to synthesis textured 60BiFeO3-PbTiO3 (60:40BFPT) by using platelets of BaTiO3 as template. Synchrotron measurement clearly showed textured 60:40BFPT. Moreover, in situ high energy synchrotron radiation was employed to investigate the influence of an external electric filed on crystallographic structure of mixed phase 60:40BFPT. Application of an electric field ≥ 1 kV/mm resulted in phase transformation from mixed rhombohedral/tetragonal phases (≈ 73.5% tetragonal / 26.5% rhombohedral) to predominately tetragonal phase (≈ 95%) at applied field of 6 kV/mm. A crystallographic texture refinement was done by using software package materials analysis using diffraction (MAUD) with a 4 th order spherical harmonic orientation distribution function (ODF). This refinement was completed using a P4mm+Cm structure model. Texture coefficients were constrained such that the equivalent texture coefficients of each phase are the same. The resulting texture refinement determined that sample has a 1.3 multiples of random distribution (MRD) {100} crystallographic texture.

Bi 1−x Ba x FeO 3 (x=0, 0.2) compounds were synthesized by conventional solid-state reaction method. Structural, morphological, magnetic and ferroelectric properties of the products were investigated systematically by employing X-ray diffraction, field emission scanning electron microscope, vibrating sample magnetometer as well as electrical evaluation techniques, respectively. The XRD results demonstrated distorted rhombohedral BiFeO 3 crystal structure with the space group of R3c. However, 20wt% Ba doped sample underwent a structural phase transition from rhombohedral to distorted pseudo-cubic structure. FESEM images of the BiFeO 3 sample calcined at 850°C showed agglomerated nano-particles with a mean particle size of 60 nm, while Bi 0.8 Ba 0.2 FeO 3 sample showed uniform cubic particles with a mean particle size of 220 nm. For Bi 0.8 Ba 0.2 FeO 3 sample calcined at 850˚C, an anomaly in permittivity was observed in the vicinity of 370˚C which is around the Neel temperature of bismuth ferrite and is in agreement with the recent reports.

Type of publicationArticle (peer-reviewed) The fabrication of highly-oriented polycrystalline ceramics of Bi 5 Fe 0.5 Co 0.5 Ti 3 O 15 , prepared via molten salt synthesis and uniaxial pressing of high aspect ratio platelets is reported. Electron backscatter images show a secondary phase within the ceramic which is rich in cobalt and iron. The concentration of the secondary phase obtained from scanning electron microscopy is estimated at less than 2% by volume, below the detection limit of x-ray diffraction (XRD). The samples were characterized by x-ray diffraction, polarization-electric field measurements, superconducting quantum interference device as a function of sample orientation and vibrating sample magnetometry as a function of temperature. It is inferred from the data that the observed ferromagnetic response is dominated by the secondary phase. This work highlights the importance of rigorous materials characterisation in the study of multiferroics as small amounts of secondary phase, below the limit of XRD, can lead to false conclusions. V C 2012 American Institute of Physics.[http://dx