No abstract

The main goal of the presented study was to develop new multi-layered weft-knitted structure for thermal insulation and to investigate the dynamic of the heat transfer through this fabric. For knitting of outer and inner layers of this structure, different raw materials of yarns were used, i.e. wool, cotton, polyester and acrylic yarns. All the newly developed multi-layered weft-knitted fabrics show thermal insulation as, after 1 h of observation, temperature on the outer layer of all tested fabrics does not reach 40℃, i.e. the temperature of a heated plate. The results of this research showed that the nature of the yarns has a significant influence on the air permeability and dynamic of the heat exchange through the multi-layered structure, as it influences porosity of the knitted fabric. The results showed that the best fabric was the one where the outer layers are knitted from woollen yarns and the inner layer from polyester filament yarns.

Intelligent textiles are predicted to see a ‘surprising’ development in the future. The consequence of this revived interest has been the growth of industrial goods and the improvement of innovative methods for the incorporation of electrical features into textiles materials. Conductive textiles comprise conductive fibres, yarns, fabrics, and finished goods produced using them. Present perspectives to manufacture electrically conductive threads containing conductive substrates, metal wires, metallic yarns, and intrinsically conductive polymers. This analysis concentrates on the latest developments of electro-conductivity in the area of smart textiles and heeds especially to materials and their assembling processes. The aim of this work is to illustrate a potential trade-off between versatility, ergonomics, low energy utilization, integration, and heating properties.

This work deals with the electrically conductive textiles for heat generation in orthopedic compression supports. This study aimed to develop compression knitted structures with integrated electro-conductive yarns and investigate their heat generation characteristics and temperature changes during the time and under stretch which is required to generate compression. Combined half-Milano rib structured knitted fabrics were made by using silver (Ag) coated PA yarn of linear density of 66 tex and 235 tex, respectively. Six variants of specimens were developed by using different amount of electro-conductive yarns in a pattern repeat. It was found that stretch negatively influences temperature values as well as time in which the required temperature is reached. Therefore, the final wearing conditions have to be summed up during the designing of compression orthopedic heated supports.

Variety and durability of color are presumed as key constrains of natural dyes. So, this study attempts to investigate the effect of metallic mordants on the color fastness properties of ecologically dyed cotton fabric using banana floral stem sap. Color difference was measured in terms of hue (ΔH*), chroma (ΔL*) and value (ΔC*) difference. Metal ions in residual mordanting bath, dyeing wastewater and level of trace metals in the finished fabric surface were accessed to justify the environmental safety and speculate the health risk respectively. Pre-mordanted specimens were dyed at 100 °C for 60 min. Optical properties of extracted sap were observed by UV visible spectroscopy. Dye fixation with fiber was determined by FTIR-ATR spectra. Atomic absorption spectroscopy was employed to determine the trace metals in finished fabric. Effect of metallic mordants were calculated in terms of color fastness to wash, water, perspiration, rubbing and light for estimating the color durability. Except light fastness property almost all color fastness values were 4/5, i.e. very good. Light fastness properties were improved for mordanting action with metallic salts. The level of trace metals in finished fabric were within the safe zone.