Electric machines with very power-to-weight ratios are inevitable for hybridelectric aircraft applications. One potential technology that is very promising to achieve the required power-to-weight ratio for short-range aircraft, are superconductors used for high current densities in the stator or high magnetic fields in the rotor. In this paper, we present an indepth analysis of the potential for fully and partially superconducting electric machines that is based on an analytical approach taking into account all relevant physical domains such as electromagnetics, superconducting properties, thermal behavior as well as structural mechanics. For the requirements of the motors in the NASA N3-X concept aircraft, we find that fully superconducting machines could achieve 3.5 times higher power-to-weight ratio than partially superconducting machines. Furthermore, our model can be used to calculate the relevant KPIs such as mass, efficiency and cryogenic cooling requirements for any other machine design.
Currently, hybrid-electric aircraft are under investigation as one possible solution to reduce the emissions of the aviation industry according to Flightpath 2050 of the European Union. To meet the drive train's requirements on low mass while aiming for highest efficiency, superconducting technologies are regarded as a key enabling technology for drive train powers of several tens of megawatts. Within the German nationally funded project TELOS an exemplary mission profile and the physical measures of a 220-passenger aircraft are used to derive the requirements for a cryogenic-cooled serial hybrid-electric propulsion system. To optimize the total system performance, we subsequently evaluated the superconducting and cryogenic-cooled components by using computationally fast, analytical models. This approach allows quantifying the system performance by using component technologies being available today. In particular, the system performance of geared drive to direct drive propulsion units are compared and the influence of the DC bus voltage and the electric frequencies of the AC circuits on the mass and the efficiency of the drive trains are analysed.
According to Flightpath 2050, the aviation industry is aiming to substantially reduce emissions over the coming decades. One possible solution to meet these ambitious goals is by moving to hybrid-electric drivetrain architectures which require the electric components to be extremely lightweight and efficient at the same time. It has been claimed in several publications that cryogenic and in particular superconducting components can help to fulfill such requirements that potentially cannot be achieved with non-cryogenic components. The purpose of this work was to make a fair comparison between a cryogenic turbo-electric propulsion system (CEPS) and a non-cryogenic turbo-electric propulsion system (TEPS) on a quantitative level. The results on the CEPS were presented in detail in a previous publication. The focus of this publication is to present the study on the TEPS, which in conclusion allows a direct comparison. For both systems the same top-level aircraft requirements were used that were derived within the project TELOS based on an exemplary mission profile and the physical measures of a 220-passenger aircraft. Our study concludes that a CEPS could be 10% to 40% lighter than a TEPS. Furthermore, a CEPS could have a total efficiency gain of up to 18% compared to a similar TEPS.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.