In this work we present a detailed Raman scattering investigation of zinc oxide and aluminum-doped zinc oxide (AZO) films characterized by a variety of nanoscale structure

In this work we demonstrate hyperbranched nanostructures, grown by pulsed laser deposition, composed of one-dimensional anatase single crystals assembled in arrays of high aspect ratio hierarchical mesostructures. The proposed growth mechanism relies on a two-step process: self-assembly from the gas phase of amorphous TiO2 clusters in a forest of tree-shaped hierarchical mesostructures with high aspect ratio; oriented crystallization of the branches upon thermal treatment. Structural and morphological characteristics can be optimized to achieve both high specific surface area for optimal dye uptake and broadband light scattering thanks to the microscopic feature size. Solid-state dye sensitized solar cells fabricated with arrays of hyperbranched TiO2 nanostructures on FTO-glass sensitized with D102 dye showed a significant 66% increase in efficiency with respect to a reference mesoporous photoanode and reached a maximum efficiency of 3.96% (among the highest reported for this system). This result was achieved mainly thanks to an increase in photogenerated current directly resulting from improved light harvesting efficiency of the hierarchical photoanode. The proposed photoanode overcomes typical limitations of 1D TiO2 nanostructures applied to ss-DSC and emerges as a promising foundation for next-generation high-efficiency solid-state devices comprosed of dyes, polymers, or quantum dots as sensitizers.

No abstract

No abstract

The structure-property relation of nanostructured Al-doped ZnO thin films has been investigated in detail through a systematic variation of structure and morphology, with particular emphasis on how they affect optical and electrical properties. A variety of structures, ranging from compact polycrystalline films to mesoporous, hierarchically organized cluster assemblies, are grown by pulsed laser deposition at room temperature at different oxygen pressures. We investigate the dependence of functional properties on structure and morphology and show how the correlation between electrical and optical properties can be studied to evaluate energy gap, conduction band effective mass and transport mechanisms. Understanding these properties opens up opportunities for specific applications in photovoltaic devices, where optimized combinations of conductivity, transparency and light scattering are required.

No abstract

Motivated by recent studies demonstrating a high strength -high ductility potential of nano-scale metallic glass samples, the mechanical response of freestanding Zr 65 Ni 35 film with sub-micron thickness has been investigated by combining advanced on-chip tensile testing and electron microscopy. Large deformation up to 15% is found for specimen thicknesses below 500 nm with variations depending on specimen size and frame compliance. The deformation is homogenous until fracture, with no evidence of shear banding.The yield stress is doubled when decreasing the specimen cross-section, reaching ~3 GPa for small crosssections. The fracture strain variation is related to both the stability of the test device and to the specimen size. The study concludes on clear disconnect between the mechanisms controlling the onset of plasticity and the fracture process.

In this paper, we present a detailed mechanical characterization of freestanding bilayer (Au-TiW) micro-cantilevers and double clamped beams, for applications as Radio Frequency (RF)-switches Micro-Electromechanical Systems (MEMS). The testing structures have been characterized by an optical profilometer and Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS), in order to acquire information about their geometries, composition, and the gap between the substrate underneath. Then, the micro-beams are deflected by using a specifically designed nanoindentation procedure based dynamic stiffness measurement during bending in order to extract the elastic modulus and the residual stresses of both layers. Firstly, the classic beam theory has been implemented for bilayer cantilevers enabling the extraction of elastic moduli. Then, residual stresses are estimated by deflecting double clamped beams, while implementing new analytical models for a bilayer system. The obtained elastic moduli are consistent with the average ones obtained for a single layer micro-cantilever and with nanoindentation results for TiW and Au homogeneous films. The residual stresses are in agreement with the values obtained from the double slot Focused Ion Beam (FIB) and Digital Image Correlation (DIC) procedure, providing an alternative and portable way for the assessment of residual stresses on composite double clamped micro-beams